The CFEngine Enterprise Vagrant Environment provides an easy way to test and explore CFEngine Enterprise. This guide describes how to set up a client-server model with CFEngine and, through policy, manage both machines. Vagrant will create one VirtualBox VM to be the Policy Server (server), and another machine that will be the Host Agent (client), or host that can be managed by CFEngine. Both running 64-bit Debian and communicate on a host-only network. Apart from a one-time download of Vagrant and VirtualBox, this setup requires just one command and takes between 5 and 15 minutes to complete (determined by your Internet connection and disk speed). Upon completion, you are ready to start working with CFEngine.

Requirements

  • 2G disk space
  • 3G memory
  • CPU with VT extensions capable of running 64bit guests

Note: VirtualBox requires that your computer support hardware virtualization in order to make use of the virtual machines mentioned above. This is sometimes turned on or off in BIOS settings, but not all processors and motherboards necessarily support hardware virtualization.

If your system lacks this support you will need to choose another computer to take advantage of the 64-bit virtual machines or install CFEngine using a different approach.

Overview

  1. Install Vagrant
  2. Install Virtualbox
  3. Start the CFEngine Enterprise Vagrant Environment
  4. Log in to the Mission Portal
  5. Stop CFEngine Enterprise
  6. Uninstall

Install Vagrant

This tutorial uses Vagrant to configure your VMs. It is available for Linux, Windows and MacOS and can be downloaded from vagrantup.com. After downloading Vagrant, install it on your computer. You may want to reference the Windows Mac or Linux vagrant install guides.

Install Virtualbox

This tutorial uses VirtualBox to create virtual machines on your computer, to which Vagrant deploys CFEngine. VirtualBox can be downloaded from virtualbox.org. After downloading VirtualBox, install it on your computer.

Note: To avoid problems, disable other virtualization environments you are running.

Start the CFEngine Enterprise 3.21 Vagrant environment

Step 1. Download our ready-made Vagrant project tar-file.

Step 2. Save and unpack the file anywhere on your drive; this creates a Vagrant Project directory.

Step 3. Open a terminal and navigate to the Vagrant Project directory (e.g. /home/user/CFEngine_Enterprise_vagrant_quickstart-3.21.6-1, or C:\CFEngine_Enterprise_vagrant_quickstart-3.21.6-1) and enter the following command:

command
vagrant up

Vagrant performs the following processes:

  • Downloads the basebox for both the hub and the client (if it has not already been cached by vagrant.
  • Provisions, installs and bootstraps the hub
  • Provisions, installs and bootstraps clients

The basebox is ~500MB.

Note: If you want to use more hosts in this environment, you can edit the Vagrantfile text file in the directory that you have just created. Change the line that says "hosts = 1" to the number of hosts that you want in the setup. The maximum supported in this evaluation version of CFEngine is 25.

Log in to the Mission Portal

At the end of the setup process, you can use your browser to log in to the Mission Portal:

http://localhost:9002

username: admin

password: admin

Note: It may take up to 15 minutes before the hosts register in Mission Portal.

That's all there is to it, the install is complete! Move on and explore the environment.

Exploring the environment

Accessing VMs

Accessing via SSH

The standard vagrant ssh key is configured. To ssh to a host run vagrant ssh myhost where myhost is the name of a running vm as seen in the vagrant status output. Both the 'root' and 'vagrant' users passwords are set to 'vagrant'.

Example:

command
vagrant ssh hub
output
Last login: Fri Jun 13 18:58:10 2014 from 10.0.2.2

Accessing via GUI

If you launch the virtualbox GUI you should find the vagrant vms named CFEngine Enterprise 3.21.6-1 hub, and CFEngine Enterprise 3.21.6-1 agent host001. Additionally, you can uncomment the v.gui=true option in the Vagrantfile to have the console gui start with the vms. Note: There are two v.gui settings to uncomment; one for the hub, and one for the clients.

Check the status of the vms

Running vagrant status from the vagrant project directroy will produce output like this.

command
vagrant status
output
Current machine states:

hub                       not created (virtualbox)
host001                   not created (virtualbox)

This environment represents multiple VMs. The VMs are all listed
above with their current state. For more information about a specific
VM, run `vagrant status NAME`.

Start or resume the environment

To start or resume a halted environment simply run vagrant up from within the vagrant project directory.

command
vagrant up

Stop the environment (halt/suspend/destroy)

To shut down the vms run vagrant halt. This will preserve the vms and any changes made inside.

command
vagrant suspend
output
==> hub: Saving VM state and suspending execution...
==> host001: Saving VM state and suspending execution...

To suspend the vms run vagrant suspend. This will freeze the state of each vm and allows for latter resuming of the environment.

command
vagrant halt
output
==> host001: Attempting graceful shutdown of VM...
==> hub: Attempting graceful shutdown of VM...

At any time you can run vagrant destroy to remove the provisioned vms. This will delete the vms and any modifications made to the environment will be lost.

command
vagrant destroy
output
    host001: Are you sure you want to destroy the 'host001' VM? [y/N] y
==> host001: Forcing shutdown of VM...
==> host001: Destroying VM and associated drives...
==> host001: Running cleanup tasks for 'shell' provisioner...
==> host001: Running cleanup tasks for 'shell' provisioner...
==> host001: Running cleanup tasks for 'shell' provisioner...
    hub: Are you sure you want to destroy the 'hub' VM? [y/N] y
==> hub: Forcing shutdown of VM...
==> hub: Destroying VM and associated drives...
==> hub: Running cleanup tasks for 'shell' provisioner...
==> hub: Running cleanup tasks for 'shell' provisioner...
==> hub: Running cleanup tasks for 'shell' provisioner...

Uninstall Vagrant environment

When you have completed your evaluation are ready to use CFEngine on production servers, remove the VMs that you created above by following these simple instructions:

To remove the VMs entirely, type: vagrant destroy

If you are completely done and do not anticipate using them anymore, you can also remove the base box that was downloaded. You can see it by typing vagrant box list. To delete the basebox run vagrant box remove <basebox> virtualbox. Note: Running vagrant up from the vagrant project directory again will re-download this basebox.

Vagrant and VirtualBox are useful general purpose programs, so you might want to keep them around. If not, follow the standard procedures for your OS to remove these applications.

Next steps

See also