bundle edit_line

Table of Contents

Line based editing is a simple model for editing files. Before XML, and later JSON, most configuration files were line based. The line-based editing offers a powerful environment for model-based editing and templating.

File editing in CFEngine 3

File editing is not just a single kind of promise but a whole range of 'promises within files'. It is therefore not merely a body to a single kind of promise, but a bundle of sub-promises. After all, inside each file are new objects that can make promises, quite separate from files' external attributes.

A typical file editing stanza has the elements in the following example:

body common control
{
  version => "1.2.3";
  bundlesequence  => { "outerbundle"  };
}

bundle agent outerbundle
{
files:

  "/home/mark/tmp/cf3_test"
       create    => "true",     # Like autocreate in cf2
       edit_line => inner_bundle;
}

bundle edit_line inner_bundle
{
  vars:

    "who" string => "SysAdmin John"; # private variable in bundle

  insert_lines:
    "/* This file is maintained by CFEngine (see $(who) for details) */",
    location => first_line;

  replace_patterns:
   # replace shell comments with C comments

   "#(.*)"
      replace_with => C_comment,
     select_region => MySection("New section");

  reports:
      "This is file $(edit.filename)";
}

body replace_with C_comment
{
  replace_value => "/* $(match.1) */"; # backreference
  occurrences => "all";          # first, last all
}

body select_region MySection(x)
{
  select_start => "\[$(x)\]";
  select_end => "\[.*\]";
}

body location first_line
{
  before_after => "before";
  first_last => "first";
  select_line_matching => ".*";
}

There are several things to notice:

  • The line-editing promises are all convergent promises about patterns within the file. They have bodies, just like other attributes do and these allow us to make simple templates about file editing while extending the power of the basic primitives.

  • All file edits specified in a single edit_line bundle are handled "atomically". CFEngine edits files like this:

    • CFEngine makes a copy of the file you you want to edit.
    • CFEngine makes all the edits in the copy of the file. The filename is the same as your original file with the extension .cf-after-edit appended.
    • After all edits are complete (the delete_lines, field_edits, insert_lines, and finally replace_patterns promises), CFEngine checks to see if the new file is the same as the original one. If there are no differences, the promises have converged, so it deletes the copy, and the original is left completely unmodified.
    • If there are any differences, CFEngine makes a copy of your original file with the extension .cf-before-edit (so you always have the most recent backup available), and then renames the edited version to your original filename.

    Because file rename is an atomic operation (guaranteed by the operating system), any application program will either see the old version of the file or the new one. There is no "window of opportunity" where a partially edited file can be seen (unless an application intentionally looks for the .cf-after-edit file). Problems during editing (such as disk-full or permission errors) are likewise detected, and CFEngine will not rename a partial file over your original.

  • All pattern matching is through Perl Compatible Regular Expressions

  • Editing takes place within a marked region (which defaults to the whole file if not otherwise specified).

  • Search/replace functions now allow back-references.

  • The line edit model now contains a field or column model for dealing with tabular files such as Unix passwd and group files. We can now apply powerful convergent editing operations to single fields inside a table, to append, order and delete items from lists inside fields.

  • The special variable $(edit.filename) contains the name of the file being edited within an edit bundle.

  • On Windows, a text file may be stored stored either with CRLF line endings (Windows style), or LF line endings (Unix style). CFEngine will respect the existing line ending type and make modifications using the same type. New files will get CRLF line ending type.

In the example above, back references are used to allow conversion of comments from shell-style to C-style.

Another example of files promises is to look for changes in files. The following example reports on all recent changes to files in a directory by maintaining the most recent version of the md5 hash of the file contents. Similar checks can be used to examine metadata or both the contents and metadata, as well as using different difference checks. The Community Edition only reports that changes were found, but Enterprise versions of CFEngine can also report on what exactly the significant changes were.

bundle agent example
{
files:

  "/home/mark/tmp" -> "Security team"

       changes      => lay_a_tripwire,
       depth_search => recurse("inf"),
       action       => background;
}

body changes lay_a_tripwire
{
  hash           => "md5";
  report_changes => "content";
  update         => "yes";
}

Scope and lifetime of the select_region

The region selected with select_region exists during the lifetime of the promise. This means that once a promise has been started the selected region will be used regardless of what the changes are.

There is a down side to this, promise lifetime is shorter than expected. For instance let's look at the following code example:

bundle agent init
{
vars:
    "states" slist => { "actual", "expected" };

    "actual" string =>
"header
header
BEGIN
One potato
Two potato
Three potatoe
Four
END
trailer
trailer";

    "expected" string =>
"header
header
One potato
Two potato
Four
trailer
trailer";

files:
    "testfile.$(states)"
      create => "true",
      edit_line => init_insert("$(init.$(states))"),
      edit_defaults => init_empty;
}

bundle edit_line init_insert(str)
{
insert_lines:
    "$(str)";
}

body edit_defaults init_empty
{
  empty_file_before_editing => "true";
}

#######################################################

bundle agent test
{
vars:
    "tstr" slist => { "BEGIN", "    Three potatoe", "END" };

files:
    "testfile.actual"
      edit_line => test_delete("$(test.tstr)");
}

bundle edit_line test_delete(str)
{
delete_lines:
    "$(str)"
      select_region => test_select;
}

body select_region test_select
{
  select_start => "BEGIN";
  select_end => "END";
  include_start_delimiter => "true";
  include_end_delimiter => "true";
  select_end_match_eof => "true";
}

The code generates two files, testfile.actual and testfile.expected. The idea is that both files will be equal after the promise is run, since the transformations applied to testfile.actual will convert it into testfile.equal.

However due to the lifetime of promises, this is not true. The attribute select_region lives as long as the promise that created it lives and it will be recreated on the next incarnation.

Notice that tstr is a slist that is used as a parameter for edit_line, which uses it to select the strings that will be removed. The select_region body specifies that the select_start attribute is "BEGIN", which holds true only for the first invocation of the promise because during that iteration it will be removed. Once it is removed the select_region body will never be able to match select_start again.

In the previous example, it is easy to think that the select_region will be kept during the whole iteration of the slist. This is not true, each element in the slist will trigger its own invocation of the promise, therefore select_region will only match the first iteration.

The solution to this problem is simple: if the marker for a region needs to be removed, then it cannot be used as a marker. In the example above it is enough to change the markers from "BEGIN" to "header" and from "END" to "trailer" to obtain the desired result.

Attributes

select_region

Type: body select_region

Description: Restrict edit_line promise to specific section

Restrict edits to a specific region of a file based on select_start and select_end regular expressions. If the beginning and ending regular expressions match more than one region only the first region will be selected for editing.

Common Body Attributes

Common body attributes are available to all body types. Full details for common body attributes can be found in the Common Body Attributes section of the Promise Types and Attributes page. The common attributes are as follows:

inherit_from
meta

include_start_delimiter

Description: Whether to include the section delimiter

In a sectioned file, the line that marks the opening of a section is not normally included in the defined region (that is, it is recognized as a delimiter, but it is not included as one of the lines available for editing). Setting this option to true makes it included.

Type: boolean

Default value: false

Example:

     body select_region MySection(x)
     {
       select_start => "\[$(x)\]";
       select_end => "\[.*\]";
       include_start_delimiter => "true";
     }

Input file:

     [My section]
     one
     two
     three

In this example, the section does not normally include the line [My section]. By setting include_start_delimiter to true it would be possible for example, to delete the entire section, including the section header. If however include_start_delimiter is false, the contents of the section could be deleted, but the header would be unaffected by any delete_lines promises. See the next section on include_start_delimiter for further details.

History: This attribute was introduced in CFEngine version 3.0.5 (2010)

include_end_delimiter

Description: Whether to include the section delimiter

In a sectioned file, the line that marks the end of a section is not normally included in the defined region; that is, it is recognized as a delimiter, but it is not included as one of the lines available for editing. Setting this option to true makes it included.

Type: boolean

Default value: false

Example:

     body select_region BracketSection(x)
     {
     select_start => "$(x) \{";
     select_end => "}";
     include_end_delimiter => "true";
     }

Input file:

     /var/log/mail.log {
         monthly
         missingok
         notifempty
         rotate 7
         }

The section does not normally include the line containing }. By setting include_end_delimiter to true it would be possible for example, to delete the entire section, including the section trailer. If however include_end_delimiter is false, the contents of the section could be deleted, but the header would be unaffected by any delete_lines promises.

The use of include_start_delimiter and include_end_delimiter depend on the type of sections you are dealing with, and what you want to do with them. Note that sections can be bounded at both the start and end (as in the example above) or just at the start (as in the sample shown in include_start_delimiter).

History: This attribute was introduced in CFEngine version 3.0.5 (2010)

select_start

Description: Anchored regular expression matching start of edit region

See also select_end. These delimiters mark out the region of a file to be edited.

Type: string

Allowed input range: .*

Example:

     body select_region example(x)
     {
       select_start => "\[$(x)\]";
       select_end => "\[.*\]";
     }

select_end

Description: Anchored regular expression matches end of edit region from start

See also select_start. These delimiters mark out the region of a file to be edited.

Type: string

Allowed input range: .*

Example:

     body select_region example(x)
     {
     select_start => "\[$(x)\]";
     select_end => "\[.*\]";
     }

If you want to match from a starting location to the end of the file (even if there are other lines matching select_start intervening), then just omit the select_end promise and the selected region will run to the end of the file. The default behavior can be modified by using select_end_match_eof or select_end_match_eof.

select_end_match_eof

Description: When select_end_match_eof is set to true select_end will consider end of file as the end region if it is unable to match the end pattern.

See also select_start and select_end. These delimiters mark out the region of a file to be edited.

Type: boolean

Default value: false

Example:

     body select_region example(x)
     {
     select_start => "\[$(x)\]";
     select_end => "\[.*\]";
     select_end_match_eof => "true";
     }

If the select_end attribute is omitted, the selected region will run to the end of the file no matter what the value of select_end_match_eof is set to.

Note: The global body agent control `select_end_match_eof sets the default behaviour for the entire policy. The local edit_line promise constraint takes precedence over the body agent control configuration option.

History: This attribute was introduced in CFEngine version 3.9.0 (2016)