Table of Contents
Network Examples
Table of Contents
- Find MAC address
- Client-server example
- Read from a TCP socket
- Set up a PXE boot server
- Resolver management
- Mount NFS filesystem
- Unmount NFS filesystem
- Find the MAC address
- Mount NFS filesystem
Find MAC address
Finding the ethernet address can be hard, but on Linux it is straightforward.
bundle agent test
{
vars:
linux::
"interface" string => execresult("/sbin/ifconfig eth0","noshell");
solaris::
"interface" string => execresult("/usr/sbin/ifconfig bge0","noshell");
freebsd::
"interface" string => execresult("/sbin/ifconfig le0","noshell");
darwin::
"interface" string => execresult("/sbin/ifconfig en0","noshell");
classes:
linux::
"ok" expression => regextract(
".*HWaddr ([^\s]+).*(\n.*)*",
"$(interface)",
"mac"
);
solaris::
"ok" expression => regextract(
".*ether ([^\s]+).*(\n.*)*",
"$(interface)",
"mac"
);
freebsd::
"ok" expression => regextract(
".*ether ([^\s]+).*(\n.*)*",
"$(interface)",
"mac"
);
darwin::
"ok" expression => regextract(
"(?s).*ether ([^\s]+).*(\n.*)*",
"$(interface)",
"mac"
);
reports:
ok::
"MAC address is $(mac[1])";
}
Client-server example
body common control
{
bundlesequence => { "testbundle" };
version => "1.2.3";
#fips_mode => "true";
}
bundle agent testbundle
{
files:
"/home/mark/tmp/testcopy"
comment => "test copy promise",
copy_from => mycopy("/home/mark/LapTop/words","127.0.0.1"),
perms => system,
depth_search => recurse("inf"),
classes => satisfied("copy_ok");
"/home/mark/tmp/testcopy/single_file"
comment => "test copy promise",
copy_from => mycopy("/home/mark/LapTop/Cfengine3/trunk/README","127.0.0.1"),
perms => system;
reports:
copy_ok::
"Files were copied..";
}
body perms system
{
mode => "0644";
}
body depth_search recurse(d)
{
depth => "$(d)";
}
body copy_from mycopy(from,server)
{
source => "$(from)";
servers => { "$(server)" };
compare => "digest";
encrypt => "true";
verify => "true";
copy_backup => "true"; #/false/timestamp
purge => "false";
type_check => "true";
force_ipv4 => "true";
trustkey => "true";
}
body classes satisfied(x)
{
promise_repaired => { "$(x)" };
persist_time => "0";
}
body server control
{
allowconnects => { "127.0.0.1" , "::1" };
allowallconnects => { "127.0.0.1" , "::1" };
trustkeysfrom => { "127.0.0.1" , "::1" };
# allowusers
}
bundle server my_access_rules()
{
access:
"/home/mark/LapTop"
admit => { "127.0.0.1" };
}
Read from a TCP socket
body common control
{
bundlesequence => { "example" };
}
bundle agent example
{
vars:
"my80" string => readtcp("research.iu.hio.no","80","GET /index.php HTTP/1.1$(const.r)$(const.n)Host: research.iu.hio.no$(const.r)$(const.n)$(const.r)$(const.n)",20);
classes:
"server_ok" expression => regcmp(".*200 OK.*\n.*","$(my80)");
reports:
server_ok::
"Server is alive";
!server_ok::
"Server is not responding - got $(my80)";
}
Set up a PXE boot server
Use CFEngine to set up a PXE boot server.
body common control
{
bundlesequence => { "pxe" };
inputs => { "$(sys.libdir)/stdlib.cf" };
}
bundle agent pxe
{
vars:
"software" slist => {
"atftp",
"dhcp-server",
"syslinux",
"apache2"
};
"dirs" slist => {
"/tftpboot",
"/tftpboot/CFEngine/rpm",
"/tftpboot/CFEngine/inputs",
"/tftpboot/pxelinux.cfg",
"/tftpboot/kickstart",
"/srv/www/repos"
};
"tmp_location" string => "/tftpboot/CFEngine/inputs";
# Distros that we can install
"rh_distros" slist => { "4.7", "5.2" };
"centos_distros" slist => { "5.2" };
# File contents of atftp configuration
"atftpd_conf" string =>
"
ATFTPD_OPTIONS=\"--daemon \"
ATFTPD_USE_INETD=\"no\"
ATFTPD_DIRECTORY=\"/tftpboot\"
ATFTPD_BIND_ADDRESSES=\"\"
";
# File contents of DHCP configuration
"dhcpd" string =>
"
DHCPD_INTERFACE=\"eth0\"
DHCPD_RUN_CHROOTED=\"yes\"
DHCPD_CONF_INCLUDE_FILES=\"\"
DHCPD_RUN_AS=\"dhcpd\"
DHCPD_OTHER_ARGS=\"\"
DHCPD_BINARY=\"\"
";
"dhcpd_conf" string =>
"
allow booting;
allow bootp;
ddns-update-style none; ddns-updates off;
subnet 192.168.0.0 netmask 255.255.255.0 {
range 192.168.0.20 192.168.0.254;
default-lease-time 3600;
max-lease-time 4800;
option routers 192.168.0.1;
option domain-name \"test.CFEngine.com\";
option domain-name-servers 192.168.0.1;
next-server 192.168.0.1;
filename \"pxelinux.0\";
}
group {
host node1 {
# Dummy machine
hardware ethernet 00:0F:1F:94:FE:07;
fixed-address 192.168.0.11;
option host-name \"node1\";
}
host node2 {
# Dell Inspiron 1150
hardware ethernet 00:0F:1F:0E:70:E7;
fixed-address 192.168.0.12;
option host-name \"node2\";
}
}
";
# File contains of Apache2 HTTP configuration
"httpd_conf" string =>
"
<Directory /srv/www/repos>
Options Indexes
AllowOverride None
</Directory>
Alias /repos /srv/www/repos
<Directory /tftpboot/distro/RHEL/5.2>
Options Indexes
AllowOverride None
</Directory>
Alias /distro/rhel/5.2 /tftpboot/distro/RHEL/5.2
<Directory /tftpboot/distro/RHEL/4.7>
Options Indexes
AllowOverride None
</Directory>
Alias /distro/rhel/4.7 /tftpboot/distro/RHEL/4.7
<Directory /tftpboot/distro/CentOS/5.2>
Options Indexes
AllowOverride None
</Directory>
Alias /distro/centos/5.2 /tftpboot/distro/CentOS/5.2
<Directory /tftpboot/kickstart>
Options Indexes
AllowOverride None
</Directory>
Alias /kickstart /tftpboot/kickstart
<Directory /tftpboot/CFEngine>
Options Indexes
AllowOverride None
</Directory>
Alias /CFEngine /tftpboot/CFEngine
";
# File contains of Kickstart for RHEL5 configuration
"kickstart_rhel5_conf" string =>
"
auth --useshadow --enablemd5
bootloader --location=mbr
clearpart --all --initlabel
graphical
firewall --disabled
firstboot --disable
key 77244a6377a8044a
keyboard no
lang en_US
logging --level=info
url --url=http://192.168.0.1/distro/rhel/5.2
network --bootproto=dhcp --device=eth0 --onboot=on
reboot
rootpw --iscrypted $1$eOnXdDPF$279sQ//zry6rnQktkATeM0
selinux --disabled
timezone --isUtc Europe/Oslo
install
part swap --bytes-per-inode=4096 --fstype=\"swap\" --recommended
part / --bytes-per-inode=4096 --fstype=\"ext3\" --grow --size=1
%packages
@core
@base
db4-devel
openssl-devel
gcc
flex
bison
libacl-devel
libselinux-devel
pcre-devel
device-mapper-multipath
-sysreport
%post
cd /root
rpm -i http://192.168.0.1/CFEngine/rpm/CFEngine-3.0.1b1-1.el5.i386.rpm
cd /etc/yum.repos.d
wget http://192.168.0.1/repos/RHEL5.Base.repo
rpm --import /etc/pki/rpm-gpg/*
yum clean all
yum update
mkdir -p /root/CFEngine_init
cd /root/CFEngine_init
wget -nd -r http://192.168.0.1/CFEngine/inputs/
/usr/local/sbin/cf-agent -B
/usr/local/sbin/cf-agent
";
# File contains of PXElinux boot menu
"pxelinux_boot_menu" string =>
"
boot options:
rhel5 - install 32 bit i386 RHEL 5.2 (MANUAL)
rhel5w - install 32 bit i386 RHEL 5.2 (AUTO)
rhel4 - install 32 bit i386 RHEL 4.7 AS (MANUAL)
centos5 - install 32 bit i386 CentOS 5.2 (Desktop) (MANUAL)
";
# File contains of PXElinux default configuration
"pxelinux_default" string =>
"
default rhel5
timeout 300
prompt 1
display pxelinux.cfg/boot.msg
F1 pxelinux.cfg/boot.msg
label rhel5
kernel vmlinuz-RHEL5U2
append initrd=initrd-RHEL5U2 load_ramdisk=1 ramdisk_size=16384 install=http://192.168.0.1/distro/rhel/5.2
label rhel5w
kernel vmlinuz-RHEL5U2
append initrd=initrd-RHEL5U2 load_ramdisk=1 ramdisk_size=16384 ks=http://192.168.0.1/kickstart/kickstart-RHEL5U2.cfg
label rhel4
kernel vmlinuz-RHEL4U7
append initrd=initrd-RHEL4U7 load_ramdisk=1 ramdisk_size=16384 install=http://192.168.0.1/distro/rhel/4.7
label centos5
kernel vmlinuz-CentOS5.2
append initrd=initrd-CentOS5.2 load_ramdisk=1 ramdisk_size=16384 install=http://192.168.0.1/distro/centos/5.2
";
# File contains of specified PXElinux default to be a RHEL5 webserver
"pxelinux_rhel5_webserver" string =>
"
default rhel5w
label rhel5w
kernel vmlinuz-RHEL5U2
append initrd=initrd-RHEL5U2 load_ramdisk=1 ramdisk_size=16384 ks=http://192.168.0.1/kickstart/kickstart-RHEL5U2.cfg
";
# File contains of a local repository for RHEL5
"rhel5_base_repo" string =>
"
[Server]
name=Server
baseurl=http://192.168.0.1/repos/rhel5/Server/
enable=1
[VT]
name=VT
baseurl=http://192.168.0.1/repos/rhel5/VT/
enable=1
[Cluster]
name=Cluster
baseurl=http://192.168.0.1/repos/rhel5/Cluster/
enable=1
[ClusterStorage]
name=Cluster Storage
baseurl=http://192.168.0.1/repos/rhel5/ClusterStorage/
enable=1
";
#####################################################
files:
packages_ok::
# Create files/dirs and edit the new files
"/tftpboot/distro/RHEL/$(rh_distros)/."
create => "true";
"/tftpboot/distro/CentOS/$(centos_distros)/."
create => "true";
"$(dirs)/."
create => "true";
"/tftpboot/pxelinux.cfg/boot.msg"
create => "true",
perms => mo("644","root"),
edit_line => append_if_no_line("$(pxelinux_boot_menu)"),
edit_defaults => empty;
"/tftpboot/pxelinux.cfg/default"
create => "true",
perms => mo("644","root"),
edit_line => append_if_no_line("$(pxelinux_default)"),
edit_defaults => empty;
"/tftpboot/pxelinux.cfg/default.RHEL5.webserver"
create => "true",
perms => mo("644","root"),
edit_line => append_if_no_line("$(pxelinux_rhel5_webserver)"),
edit_defaults => empty;
"/tftpboot/kickstart/kickstart-RHEL5U2.cfg"
create => "true",
perms => mo("644","root"),
edit_line => append_if_no_line("$(kickstart_rhel5_conf)"),
edit_defaults => empty;
"/srv/www/repos/RHEL5.Base.repo"
create => "true",
perms => mo("644","root"),
edit_line => append_if_no_line("$(rhel5_base_repo)"),
edit_defaults => empty;
# Copy files
"/tftpboot"
copy_from => local_cp("/usr/share/syslinux"),
depth_search => recurse("inf"),
file_select => pxelinux_files,
action => immediate;
"$(tmp_location)"
perms => m("644"),
copy_from => local_cp("/var/cfengine/inputs"),
depth_search => recurse("inf"),
file_select => input_files,
action => immediate;
# Edit atftp, dhcp and apache2 configurations
"/etc/sysconfig/atftpd"
edit_line => append_if_no_line("$(atftpd_conf)"),
edit_defaults => empty,
classes => satisfied("atftpd_ready");
"/etc/sysconfig/dhcpd"
edit_line => append_if_no_line("$(dhcpd)"),
edit_defaults => empty;
"/etc/dhcpd.conf"
edit_line => append_if_no_line("$(dhcpd_conf)"),
edit_defaults => empty,
classes => satisfied("dhcpd_ready");
"/etc/apache2/httpd.conf"
edit_line => append_if_no_line("$(httpd_conf)"),
edit_defaults => std_defs,
classes => satisfied("apache2_ok");
# Make a static link
"/tftpboot/pxelinux.cfg/C0A8000C"
link_from => mylink("/tftpboot/pxelinux.cfg/default.RHEL5.webserver");
# Hash comment some lines for apaches
apache2_ok::
"/etc/apache2/httpd.conf"
edit_line => comment_lines_matching_apache2("#"),
classes => satisfied("apache2_ready");
commands:
# Restart services
atftpd_ready::
"/etc/init.d/atftpd restart";
dhcpd_ready::
"/etc/init.d/dhcpd restart";
apache2_ready::
"/etc/init.d/apache2 restart";
#####################################################
packages:
ipv4_192_168_0_1::
# Only the PXE boot server
"$(software)"
package_policy => "add",
package_method => zypper,
classes => satisfied("packages_ok");
}
body file_select pxelinux_files
{
leaf_name => { "pxelinux.0" };
file_result => "leaf_name";
}
body copy_from mycopy_local(from,server)
{
source => "$(from)";
compare => "digest";
}
body link_from mylink(x)
{
source => "$(x)";
link_type => "symlink";
}
body classes satisfied(new_class)
{
promise_kept => { "$(new_class)"};
promise_repaired => { "$(new_class)"};
}
bundle edit_line comment_lines_matching_apache2(comment)
{
vars:
"regex" slist => { "\s.*Options\sNone", "\s.*AllowOverride\sNone", "\s.*Deny\sfrom\sall" };
replace_patterns:
"^($(regex))$"
replace_with => comment("$(comment)");
}
body file_select input_files
{
leaf_name => { ".*.cf",".*.dat",".*.txt" };
file_result => "leaf_name";
}
Resolver management
bundle common g # globals
{
vars:
"searchlist" slist => {
"search iu.hio.no",
"search cfengine.com"
};
"nameservers" slist => {
"128.39.89.10",
"128.39.74.16",
"192.168.1.103"
};
classes:
"am_name_server" expression => reglist("@(nameservers)","$(sys.ipv4[eth1])");
}
body common control
{
any::
bundlesequence => {
"g",
resolver(@(g.searchlist),@(g.nameservers))
};
domain => "iu.hio.no";
}
bundle agent resolver(s,n)
{
files:
# When passing parameters down, we have to refer to
# a source context
"$(sys.resolv)" # test on "/tmp/resolv.conf" #
create => "true",
edit_line => doresolv("@(this.s)","@(this.n)"),
edit_defaults => reconstruct;
# or edit_defaults => modify
}
bundle edit_line doresolv(s,n)
{
vars:
"line" slist => { @(s), @(n) };
insert_lines:
"$(line)";
}
body edit_defaults reconstruct
{
empty_file_before_editing => "true";
edit_backup => "false";
max_file_size => "100000";
}
body edit_defaults modify
{
empty_file_before_editing => "false";
edit_backup => "false";
max_file_size => "100000";
}
Mount NFS filesystem
body common control
{
bundlesequence => { "mounts" };
}
bundle agent mounts
{
storage:
"/mnt" mount => nfs("slogans.iu.hio.no","/home");
}
body mount nfs(server,source)
{
mount_type => "nfs";
mount_source => "$(source)";
mount_server => "$(server)";
#mount_options => { "rw" };
edit_fstab => "true";
unmount => "true";
}
Unmount NFS filesystem
body common control
{
bundlesequence => { "mounts" };
}
bundle agent mounts
{
storage:
# Assumes the filesystem has been exported
"/mnt" mount => nfs("server.example.org","/home");
}
body mount nfs(server,source)
{
mount_type => "nfs";
mount_source => "$(source)";
mount_server => "$(server)";
edit_fstab => "true";
unmount => "true";
}