Network Examples

Table of Contents

Find MAC address

Finding the ethernet address can be hard, but on Linux it is straightforward.

bundle agent test
{
  vars:

    linux::
      "interface" string => execresult("/sbin/ifconfig eth0","noshell");

    solaris::
      "interface" string => execresult("/usr/sbin/ifconfig bge0","noshell");

    freebsd::
      "interface" string => execresult("/sbin/ifconfig le0","noshell");

    darwin::
      "interface" string => execresult("/sbin/ifconfig en0","noshell");

  classes:

    linux::

      "ok" expression => regextract(
                                     ".*HWaddr ([^\s]+).*(\n.*)*",
                                     "$(interface)",
                                     "mac"
      );

    solaris::

      "ok" expression => regextract(
                                     ".*ether ([^\s]+).*(\n.*)*",
                                     "$(interface)",
                                     "mac"
      );

    freebsd::

      "ok" expression => regextract(
                                     ".*ether ([^\s]+).*(\n.*)*",
                                     "$(interface)",
                                     "mac"
      );

    darwin::

      "ok" expression => regextract(
                                     "(?s).*ether ([^\s]+).*(\n.*)*",
                                     "$(interface)",
                                     "mac"
      );

  reports:

    ok::

      "MAC address is $(mac[1])";

}

Client-server example

body common control
{
      bundlesequence  => { "testbundle" };
      version => "1.2.3";
      #fips_mode => "true";
}

bundle agent testbundle
{
  files:
      "/home/mark/tmp/testcopy"
      comment  => "test copy promise",
      copy_from    => mycopy("/home/mark/LapTop/words","127.0.0.1"),
      perms        => system,
      depth_search => recurse("inf"),
      classes      => satisfied("copy_ok");

      "/home/mark/tmp/testcopy/single_file"
      comment  => "test copy promise",
      copy_from    => mycopy("/home/mark/LapTop/Cfengine3/trunk/README","127.0.0.1"),
      perms        => system;

  reports:
    copy_ok::
      "Files were copied..";
}

body perms system
{
      mode  => "0644";
}

body depth_search recurse(d)
{
      depth => "$(d)";
}

body copy_from mycopy(from,server)
{
      source      => "$(from)";
      servers     => { "$(server)" };
      compare     => "digest";
      encrypt     => "true";
      verify      => "true";
      copy_backup => "true";                  #/false/timestamp
      purge       => "false";
      type_check  => "true";
      force_ipv4  => "true";
      trustkey => "true";
}

body classes satisfied(x)
{
      promise_repaired => { "$(x)" };
      persist_time => "0";
}

body server control
{
      allowconnects         => { "127.0.0.1" , "::1" };
      allowallconnects      => { "127.0.0.1" , "::1" };
      trustkeysfrom         => { "127.0.0.1" , "::1" };
      # allowusers
}

bundle server access_rules()
{
  access:
      "/home/mark/LapTop"
      admit   => { "127.0.0.1" };
}

Read from a TCP socket

body common control
{
      bundlesequence  => { "example" };
}

bundle agent example
{
  vars:
      "my80" string => readtcp("research.iu.hio.no","80","GET /index.php HTTP/1.1$(const.r)$(const.n)Host: research.iu.hio.no$(const.r)$(const.n)$(const.r)$(const.n)",20);

  classes:
      "server_ok" expression => regcmp(".*200 OK.*\n.*","$(my80)");

  reports:
    server_ok::
      "Server is alive";
    !server_ok::
      "Server is not responding - got $(my80)";
}

Set up a PXE boot server

Use CFEngine to set up a PXE boot server.

body common control
{
      bundlesequence => { "pxe" };
      inputs => { "$(sys.libdir)/stdlib.cf" };
}


bundle agent pxe
{
  vars:
      "software" slist => {
                            "atftp",
                            "dhcp-server",
                            "syslinux",
                            "apache2"
      };

      "dirs" slist => {
            "/tftpboot",
            "/tftpboot/CFEngine/rpm",
            "/tftpboot/CFEngine/inputs",
            "/tftpboot/pxelinux.cfg",
            "/tftpboot/kickstart",
            "/srv/www/repos"
      };

      "tmp_location"    string => "/tftpboot/CFEngine/inputs";

      # Distros that we can install

      "rh_distros" slist => { "4.7", "5.2" };
      "centos_distros" slist => { "5.2" };

      # File contents of atftp configuration

      "atftpd_conf" string =>
      "

ATFTPD_OPTIONS=\"--daemon \"
ATFTPD_USE_INETD=\"no\"
ATFTPD_DIRECTORY=\"/tftpboot\"
ATFTPD_BIND_ADDRESSES=\"\"
       ";
      # File contents of DHCP configuration

      "dhcpd" string =>
      "

DHCPD_INTERFACE=\"eth0\"
DHCPD_RUN_CHROOTED=\"yes\"
DHCPD_CONF_INCLUDE_FILES=\"\"
DHCPD_RUN_AS=\"dhcpd\"
DHCPD_OTHER_ARGS=\"\"
DHCPD_BINARY=\"\"
       ";
      "dhcpd_conf" string =>
      "

allow booting;
allow bootp;
ddns-update-style none; ddns-updates off;
 subnet 192.168.0.0 netmask 255.255.255.0 {
   range 192.168.0.20 192.168.0.254;
   default-lease-time 3600;
   max-lease-time 4800;
   option routers 192.168.0.1;
   option domain-name \"test.CFEngine.com\";
   option domain-name-servers 192.168.0.1;
   next-server 192.168.0.1;
   filename \"pxelinux.0\";
 }
 group {
   host node1 {
     # Dummy machine

     hardware ethernet 00:0F:1F:94:FE:07;
     fixed-address 192.168.0.11;
     option host-name \"node1\";
   }
   host node2 {
     # Dell Inspiron 1150

     hardware ethernet 00:0F:1F:0E:70:E7;
     fixed-address 192.168.0.12;
     option host-name \"node2\";
   }
 }
        ";
      # File contains of Apache2 HTTP configuration

      "httpd_conf" string =>
      "

<Directory /srv/www/repos>
Options Indexes
AllowOverride None
</Directory>
Alias /repos /srv/www/repos

<Directory /tftpboot/distro/RHEL/5.2>
Options Indexes
AllowOverride None
</Directory>
Alias /distro/rhel/5.2 /tftpboot/distro/RHEL/5.2
<Directory /tftpboot/distro/RHEL/4.7>
Options Indexes
AllowOverride None
</Directory>
Alias /distro/rhel/4.7 /tftpboot/distro/RHEL/4.7
<Directory /tftpboot/distro/CentOS/5.2>
Options Indexes
AllowOverride None
</Directory>
Alias /distro/centos/5.2 /tftpboot/distro/CentOS/5.2
<Directory /tftpboot/kickstart>
Options Indexes
AllowOverride None
</Directory>
Alias /kickstart /tftpboot/kickstart
<Directory /tftpboot/CFEngine>
Options Indexes
AllowOverride None
</Directory>
Alias /CFEngine /tftpboot/CFEngine
        ";
      # File contains of Kickstart for RHEL5 configuration

      "kickstart_rhel5_conf" string =>
      "


auth  --useshadow  --enablemd5
bootloader --location=mbr
clearpart --all --initlabel
graphical
firewall --disabled
firstboot --disable
key 77244a6377a8044a
keyboard no
lang en_US
logging --level=info
url --url=http://192.168.0.1/distro/rhel/5.2
network --bootproto=dhcp --device=eth0 --onboot=on
reboot
rootpw --iscrypted $1$eOnXdDPF$279sQ//zry6rnQktkATeM0
selinux --disabled
timezone --isUtc Europe/Oslo
install
part swap --bytes-per-inode=4096 --fstype=\"swap\" --recommended
part / --bytes-per-inode=4096 --fstype=\"ext3\" --grow --size=1
%packages
@core
@base
db4-devel
openssl-devel
gcc
flex
bison
libacl-devel
libselinux-devel
pcre-devel

device-mapper-multipath
-sysreport
%post
cd /root
rpm -i http://192.168.0.1/CFEngine/rpm/CFEngine-3.0.1b1-1.el5.i386.rpm

cd /etc/yum.repos.d
wget http://192.168.0.1/repos/RHEL5.Base.repo
rpm --import /etc/pki/rpm-gpg/*
yum clean all
yum update
mkdir -p /root/CFEngine_init
cd /root/CFEngine_init
wget -nd -r http://192.168.0.1/CFEngine/inputs/
/usr/local/sbin/cf-agent -B
/usr/local/sbin/cf-agent
        ";
      # File contains of PXElinux boot menu

      "pxelinux_boot_menu" string =>
      "

boot options:
     rhel5   - install 32 bit i386 RHEL 5.2             (MANUAL)
     rhel5w  - install 32 bit i386 RHEL 5.2             (AUTO)
     rhel4   - install 32 bit i386 RHEL 4.7 AS          (MANUAL)
     centos5 - install 32 bit i386 CentOS 5.2 (Desktop) (MANUAL)
        ";
      # File contains of PXElinux default configuration

      "pxelinux_default" string =>
      "


default rhel5
timeout 300
prompt 1
display pxelinux.cfg/boot.msg
F1 pxelinux.cfg/boot.msg

label rhel5
   kernel vmlinuz-RHEL5U2
   append initrd=initrd-RHEL5U2 load_ramdisk=1 ramdisk_size=16384 install=http://192.168.0.1/distro/rhel/5.2

label rhel5w
   kernel vmlinuz-RHEL5U2
   append initrd=initrd-RHEL5U2 load_ramdisk=1 ramdisk_size=16384 ks=http://192.168.0.1/kickstart/kickstart-RHEL5U2.cfg

label rhel4
   kernel vmlinuz-RHEL4U7
   append initrd=initrd-RHEL4U7 load_ramdisk=1 ramdisk_size=16384 install=http://192.168.0.1/distro/rhel/4.7

label centos5
   kernel vmlinuz-CentOS5.2
   append initrd=initrd-CentOS5.2 load_ramdisk=1 ramdisk_size=16384 install=http://192.168.0.1/distro/centos/5.2
        ";
      # File contains of specified PXElinux default to be a RHEL5 webserver

      "pxelinux_rhel5_webserver" string =>
      "


default rhel5w
label rhel5w
   kernel vmlinuz-RHEL5U2
   append initrd=initrd-RHEL5U2 load_ramdisk=1 ramdisk_size=16384 ks=http://192.168.0.1/kickstart/kickstart-RHEL5U2.cfg
        ";
      # File contains of a local repository for RHEL5

      "rhel5_base_repo" string =>
      "


[Server]
name=Server
baseurl=http://192.168.0.1/repos/rhel5/Server/
enable=1
[VT]
name=VT
baseurl=http://192.168.0.1/repos/rhel5/VT/
enable=1
[Cluster]
name=Cluster
baseurl=http://192.168.0.1/repos/rhel5/Cluster/
enable=1
[ClusterStorage]
name=Cluster Storage
baseurl=http://192.168.0.1/repos/rhel5/ClusterStorage/
enable=1
        ";
      #####################################################


  files:
    packages_ok::
      # Create files/dirs and edit the new files

      "/tftpboot/distro/RHEL/$(rh_distros)/."
      create => "true";

      "/tftpboot/distro/CentOS/$(centos_distros)/."
      create => "true";

      "$(dirs)/."
      create => "true";

      "/tftpboot/pxelinux.cfg/boot.msg"
      create => "true",
      perms => mo("644","root"),
      edit_line => append_if_no_line("$(pxelinux_boot_menu)"),
      edit_defaults => empty;

      "/tftpboot/pxelinux.cfg/default"
      create => "true",
      perms => mo("644","root"),
      edit_line => append_if_no_line("$(pxelinux_default)"),
      edit_defaults => empty;

      "/tftpboot/pxelinux.cfg/default.RHEL5.webserver"
      create => "true",
      perms => mo("644","root"),
      edit_line => append_if_no_line("$(pxelinux_rhel5_webserver)"),
      edit_defaults => empty;

      "/tftpboot/kickstart/kickstart-RHEL5U2.cfg"
      create => "true",
      perms => mo("644","root"),
      edit_line => append_if_no_line("$(kickstart_rhel5_conf)"),
      edit_defaults => empty;

      "/srv/www/repos/RHEL5.Base.repo"
      create => "true",
      perms => mo("644","root"),
      edit_line => append_if_no_line("$(rhel5_base_repo)"),
      edit_defaults => empty;

      # Copy files

      "/tftpboot"
      copy_from => local_cp("/usr/share/syslinux"),
      depth_search => recurse("inf"),
      file_select => pxelinux_files,
      action => immediate;

      "$(tmp_location)"
      perms => m("644"),
      copy_from => local_cp("/var/cfengine/inputs"),
      depth_search => recurse("inf"),
      file_select => input_files,
      action => immediate;

      # Edit atftp, dhcp and apache2 configurations

      "/etc/sysconfig/atftpd"
      edit_line => append_if_no_line("$(atftpd_conf)"),
      edit_defaults => empty,
      classes => satisfied("atftpd_ready");

      "/etc/sysconfig/dhcpd"
      edit_line => append_if_no_line("$(dhcpd)"),
      edit_defaults => empty;

      "/etc/dhcpd.conf"
      edit_line => append_if_no_line("$(dhcpd_conf)"),
      edit_defaults => empty,
      classes => satisfied("dhcpd_ready");

      "/etc/apache2/httpd.conf"
      edit_line => append_if_no_line("$(httpd_conf)"),
      edit_defaults => std_defs,
      classes => satisfied("apache2_ok");
      # Make a static link

      "/tftpboot/pxelinux.cfg/C0A8000C"
      link_from => mylink("/tftpboot/pxelinux.cfg/default.RHEL5.webserver");
      # Hash comment some lines for apaches

    apache2_ok::
      "/etc/apache2/httpd.conf"
      edit_line => comment_lines_matching_apache2("#"),
      classes => satisfied("apache2_ready");
  commands:
      # Restart services

    atftpd_ready::
      "/etc/init.d/atftpd restart";
    dhcpd_ready::
      "/etc/init.d/dhcpd restart";
    apache2_ready::
      "/etc/init.d/apache2 restart";

      #####################################################

  packages:

    ipv4_192_168_0_1::
      # Only the PXE boot server

      "$(software)"
      package_policy => "add",
      package_method => zypper,
      classes => satisfied("packages_ok");
}



body file_select pxelinux_files
{
      leaf_name => { "pxelinux.0" };
      file_result => "leaf_name";
}

body copy_from mycopy_local(from,server)
{
      source      => "$(from)";
      compare     => "digest";
}

body link_from mylink(x)
{
      source => "$(x)";
      link_type => "symlink";
}

body classes satisfied(new_class)
{
      promise_kept => { "$(new_class)"};
      promise_repaired => { "$(new_class)"};
}

bundle edit_line comment_lines_matching_apache2(comment)
{
  vars:
      "regex" slist => { "\s.*Options\sNone", "\s.*AllowOverride\sNone", "\s.*Deny\sfrom\sall" };

  replace_patterns:
      "^($(regex))$"
      replace_with => comment("$(comment)");
}

body file_select input_files
{
      leaf_name => { ".*.cf",".*.dat",".*.txt" };
      file_result => "leaf_name";
}

Resolver management

bundle common g # globals
{
  vars:
      "searchlist"  slist => {
                               "search iu.hio.no",
                               "search cfengine.com"
      };
      "nameservers" slist => {
                               "128.39.89.10",
                               "128.39.74.16",
                               "192.168.1.103"
      };
  classes:
      "am_name_server" expression => reglist("@(nameservers)","$(sys.ipv4[eth1])");
}


body common control
{
    any::
      bundlesequence  => {
                           "g",
                           resolver(@(g.searchlist),@(g.nameservers))
      };
      domain => "iu.hio.no";
}


bundle agent resolver(s,n)
{
  files:
      # When passing parameters down, we have to refer to
      # a source context

      "$(sys.resolv)"  # test on "/tmp/resolv.conf" #
      create        => "true",
      edit_line     => doresolv("@(this.s)","@(this.n)"),
      edit_defaults => reconstruct;
      # or edit_defaults => modify
}


bundle edit_line doresolv(s,n)
{
  vars:
      "line" slist => { @(s), @(n) };
  insert_lines:
      "$(line)";
}

body edit_defaults reconstruct
{
      empty_file_before_editing => "true";
      edit_backup => "false";
      max_file_size => "100000";
}

body edit_defaults modify
{
      empty_file_before_editing => "false";
      edit_backup => "false";
      max_file_size => "100000";
}

Mount NFS filesystem

body common control
{
      bundlesequence => { "mounts" };
}

bundle agent mounts
{
  storage:
      "/mnt" mount  => nfs("slogans.iu.hio.no","/home");
}

body mount nfs(server,source)
{
      mount_type => "nfs";
      mount_source => "$(source)";
      mount_server => "$(server)";
      #mount_options => { "rw" };
      edit_fstab => "true";
      unmount => "true";
}

Unmount NFS filesystem

body common control
{
      bundlesequence => { "mounts" };
}

bundle agent mounts
{
  storage:
      # Assumes the filesystem has been exported

      "/mnt" mount  => nfs("server.example.org","/home");
}

body mount nfs(server,source)
{
      mount_type => "nfs";
      mount_source => "$(source)";
      mount_server => "$(server)";
      edit_fstab => "true";
      unmount => "true";
}