This manual is for version 2.2.10 of cfengine and was last updated on the 21 January 2009.
The purpose of the cfengine reference manual is to collect together and document the raw facts about the different components of cfengine. Once you have become proficient in the use of cfengine, you will no longer have need of the tutorial. The reference manual, on the other hand, changes with each version of cfengine. You will be able to use it online, or in printed form to find out the details you require to implement configurations in practice.
In order to install cfengine, you should first ensure that the following packages are installed.
The preferred method of installation is then
tar zxf cfengine-x.x.x.tar.gz
cd cfengine-x.x.x
./configure
make
make install
This results in binaries being installed in /usr/local/sbin. Since this is not necessarily a local file system on all hosts, users are encouraged to keep local copies of the binaries on each host, inside the cfengine trusted work directory.
In order to achieve the desired simplifications, it was decided to reserve a private work area for the cfengine tool-set. In cfengine 1.x, the administrator could choose the locations of configuration files, locks, and logging data independently. In cfengine 2.x, this diversity has been simplified to a single directory which defaults to /var/cfengine (similar to /var/cron):
/var/cfengine
/var/cfengine/bin
/var/cfengine/inputs
/var/cfengine/outputs
The installation location /usr/local/sbin is not necessarily a local file system, and cannot therefore be trusted to a) be present, and b) be authentic on an arbitrary system.
Similarly, a trusted cache of the input files must now be maintained
in the inputs subdirectory. When cfengine is invoked by the
scheduler, it reads only from this directory. It is up to the user to
keep this cache updated, on each host. This simplifies and
consolidates the cfengine resources in a single place. The environment
variable CFINPUTS still overrides this default location, as before,
but in its absence or when called from the scheduler, this becomes the
location of trusted files. A special configuration file update.conf is
parsed and run before the main configuration is parsed, which is
used to ensure that the currently caches policy is up-to-date. This has private
classes and variables.
If no value is set for CFINPUTS, then the default location
is the trusted cfengine directory
/var/cfengine/inputs.
The outputs directory is now a record of spooled run-reports. These are mailed to the administrator, as previously, or can be copied to another central location and viewed in an alternative browser..
A single class can be one of several things:
ultrix, sun4, etc.
This is referred to as a hard class.
Monday, Tuesday, Wednesday, ..).
Hr00, Hr01 ... Hr23).
Min00, Min17 ... Min45).
Min00_05, Min05_10 ... Min55_00)
Day1, Day2, ... Day31).
January, February, ... December).
Yr1997, Yr2004).
ipv4_192_0_0_1,
ipv4_192_0_0, ipv4_192_0, ipv4_192).
net_iface_eth0.
To see all of the classes define on a particular host, run
host# cfagent -p -v
as a privileged user. Note that some of the classes are set only
if a trusted link can be established with cfenvd, i.e. if both
are running with privilege, and the /var/cfengine/state/env_data
file is secure. More information about classes can be found in connection with
allclasses.
Filenames in Unix-like operating systems use for their directory separator the forward slash '/' character. All references to file locations must be absolute pathnames in cfengine, i.e. they must begin with a complete specification of which directory they are in. For example:
/etc/passwd
/usr/local/masterfiles/distfile
The only place where it makes sense to refer to a file without a complete directory specification is when searching through directories for different kinds of file, e.g.
tidy:
/home/user pattern=core age=0 recurse=inf
Here, one can write core without a path, because one is looking for any file of that name in a number of directories.
The Windows operating systems traditionally use a different filename convention. The following are all valid absolute file names under Windows:
c:\winnt
c:/winnt
/var/cfengine/inputs
//fileserver/share2/dir
The `drive' name “C:” in Windows refers to a partition or device. Unlike Unix, Windows does not integrate these seamlessly into a single file-tree. This is not a valid absolute filename:
\var\cfengine\inputs
Paths beginning with a backslash are assumed to be win32 paths. They must begin with a drive letter or double-slash server name.
It is possible to turn debugging output on or off on a running cfagent. This is useful for troubleshooting the cause of hangups, or for getting debugging output from a cfagent launched from cfexecd.
A running cfagent process that receives a SIGUSR1 will immediately begin to behave as if it had been invoked with the '-d2' option. A SIGUSR2 will cause a running cfagent to run as if the '-d2' option had not been invoked.
Note that this output is often quite verbose.
The very first thing you should do on every host is to establish a public-private key pair. To do this, you need to run the program
everyhost# cfkey
on every host. This program needs to produce random numbers, and needs a source of randomness. A good strategy is to install and run the cfenvd program for a week or two in advance of deploying cfengine 2, since cfenvd collects random events, which are an excellent source of entropy for random number generation. If you get the error message “PRNG not seeded”, it means that insufficient data were found in order to make a random key. In that case, run cfenvd for a few days more and try again.
The cfshow command was introduced in cfengine 2.1.11 in order to
provide a simple way to show some of the data stored by cfagent for
operational purposes.
everyhost# cfshow -a
everyhost# cfshow -l
everyhost# cfshow -c
everyhost# cfshow -s
everyhost# cfshow -p
everyhost# cfshow -f cfagent.conf -r linux.*
The command line options are
--active’--audit’--html and --xml options.
--checksum’--classes’--html’--locks’--last-seen’ IP + 192.168.1.101 192.168.1.101 [Tue Jan 23 16:13] not seen for (6.42) hrs, Av 0.02 +/- 0.01 hrs
IP - 192.168.1.101 192.168.1.101 [Tue Jan 23 16:13] not seen for (6.42) hrs, Av 0.02 +/- 0.01 hrs
Lines marked with a + represent successful attempts made by cfagent on
the current host to connect to another host. Lines with a - are
connections attempted (but not necessarily succeeded) into cfservd from another
host's cfagent or cfrun.
--regex regex’--performance’ (0.00 mins Tue Feb 13 19:05) Av 0.00 +/- 0.00 for Copy(localhost:/usr/local/sbin/cfagent > /var/cfengine/bin/cfagent)
(0.00 mins Tue Feb 13 19:05) Av 0.00 +/- 0.00 for Copy(localhost:/usr/local/sbin/cfenvd > /var/cfengine/bin/cfenvd)
(0.02 mins Tue Feb 13 19:05) Av 0.02 +/- 0.00 for Copy(localhost:/usr/local/sbin/cfexecd > /var/cfengine/bin/cfexecd)
(0.00 mins Tue Feb 13 19:05) Av 0.00 +/- 0.00 for Copy(localhost:/usr/local/sbin/cfservd > /var/cfengine/bin/cfservd)
(6.41 mins Tue Feb 13 18:50) Av 0.00 +/- 0.00 for Exec(/usr/bin/updatedb --prunepaths=/media)
(0.00 mins Tue Feb 13 19:05) Av 0.00 +/- 0.00 for Exec(/usr/sbin/ntpdate 128.39.74.16 > /dev/null)
--xml’Cfagent is the workhorse of cfengine. It interprets and computes the necessary strategies for implementing convergent maintenance. In order to carry out work efficiently, the agent groups similar actions together. The order of these actions is goverened by a list called the actionsequence.
In many cases, cfagent will be able to complete all its work in a single pass of the actionsequence. However, in complex configurations, it is hard to resolve all of the ordering dependencies automatically in a single pass. Cfagent keeps track both of all actions that have been performed and of those that might still need to be performed (given that some actions depend on the later outcomes of others). If there is a possibility that an action ordering dilemma might occur, it runs a second pass of the actionsequence to more quickly resolve the dependency (avoiding the wait for next scheduled run). No actions are performed twice however, since the agent checks off actions that have already been performed to avoid unnecessary duplication.
control:
classes::
domain = ( DNS-domain-name )
classes:
Class/Group definitions
import:
Files to import
# other items
|
Note that GNU long options are available with the syntax
--longoption. The long names are given in brackets.
--sysadm) Print only the name of the system administrator then quit.
--auto) Can be used to signify an automatic run of cfengine, as opposed
to a manual run. The distinction is not predetermined. Use of this option
currently causes cfengine to ignore locks. This option is reserved for future
development.
--force-net-copy) Normally cfengine detects attempts to copy
from a server via the network that will loop back to the localhost.
It then avoids using the network to make the copy. This option forces
cfengine to copy using the network. Yes, someone thinks this is useful!
--no-check-files) Do not check file systems for ownership / permissions etc.
--no-check-mounts) Check mount points for consistency. If this
option is specified then directories which lie in the “mount point”
area are checked to see whether there is anything mounted on them.
Normally this is off since not all machines use mounted file
systems in the same way. e.g. HPUX does not generally operate with
partitions, but nevertheless one might wish to mimick a partition-like
environment there, but it would be irritating to be informed that
nothing was mounted on the mount point.
--debug) Enable debugging output. Normally you will want to
send this to a file using the shell script command or a pipe.
-d1 shows only parsing output. -d2 shows only
runtime action output. -d0 shows both levels. Debugging ouput is
intended mainly for the author's convenience and is not a supported
feature. The details of this output may change at any time.
--define) Define a compound class symbol of the form
alpha.beta.gamma.
--no-edits) Suppress file editing.
--enforce-links) Globally force links to be created where plain
files or links already exist. Since this option
is a big hammer, you have to use it in interactive mode and
answer a yes/no query before cfengine will run like this.
--file) Parse filename after this switch. By default cfengine
looks for a file called cfengine.conf in the current directory.
--help) Help information. Display version banner and options
summary.
--no-hard-classes). Prevents cfengine from generating any built-in
class name information. Can be used for emulation purposes.
--no-ifconfig) Do not attempt to configure the local area
network interface.
--inform) Switches on the inform output level, whereby cfengine
reports everything it changes..
--no-copy) Do not copy/image any files.
--no-lock) Ignore locks when running.
--traverse-links) Normally cfengine does not follow symbolic
links when recursively parsing directories. This option will force it
to do so.
--delete-stale-links) Delete links which do not point to
existing files (except in user home directories, which are not touched).
--no-mount) Do not attempt to mount file systems or edit the
filesystem table.
--no-modules)
Ignore modules in actionsequence.
--recon,--dry-run,--just-print) No action. Only
print what has to be done without actually doing it.
--negate,--undefine) Cancel a set of classes,
or undefine (set value to false) a compound class of the form
alpha.beta.gamma.
--parse-only) Parse file and then stop. Used for checking the
syntax of a program. You do not have to be superuser to use this
option.
--no-processes) Do not execute the processes action.
--no-splay) Switch off host splaying (sleeping).
--quert) Query the values of the comma separated list of variable names.
--no-commands) Do not execute scripts or shell commands.
--silent) Silence run time warnings.
--no-tidy) Do not tidy file systems.
--use-env) Causes cfengine to generate an environment variable
‘CFALLCLASSES’ which can be read by child processes (scripts). This
variable contains a summary of all the currently defined classes at any
given time. This option causes some System V systems to generate a Bus
Error or segmentation fault. The same information is available from the
cfengine built-in variable $(allclasses) and can be passed as a
parameter to scripts.
When this variable grows too large for embedding one can also access a complete
list of current classes in /var/cfengine/state/allclasses.
--underscore-classes). When this option is set, cfengine adds
an underscore to the beginning of the hard system classes (like _sun4, _linux
etc. The longer compound classes are not underscored, since these are already
complex and would unlikely result in collisions.) This can be used to avoid naming conflicts if you are so
unjudicious as to name a host by the name of a hard class. Other classes
are not affected.
--verbose) Verbose mode. Prints detailed information about
actions and state.
--version) Print only the version string and then quit.
--no-preconf) Do not execute the cf.preconf net
configuration file.
--no-links) Do not execute the links section of a
program.
--no-warn,--quiet) Do not print warning
messages.
--schedule) Print the exec schedule for the LAN (used by cfexecd).
In version 2.0.4, an abbreviation for actionsequence exclusions was added:
$ cfagent --avoid resolve,copy
$ cfagent --just tidy --just shellcommands
Variables in cfengine 2 are defined in contexts. Variables in a given context refer to the different phases of execution of cfengine: global, update and main. In the "current" context, variables have the form
$(variable) ${variable}
and are expanded either on parsing or at execution. Variables that cannot be expanded remain as dollar strings. Variables belonging to a context that is not the current one may be referred to as
$(context.variable) or ${context.variable}
Note carefully that cfengine requires parentheses or braces around variable
names. Unlike in the shell, they cannot be omitted. There is no difference
between these forms as far as cfengine is concerned. Some authors like to use
the () form for cfengine variables, to distinguish them with shell
variables in command strings. The () form does not work in function
arguments, except inside quoted strings.
Consider the example:
$(global.env_time)
Some variables in cfengine are associative arrays (as made famous by Perl). Such arrays are referred to by square brackets:
$(array[key]) $(array[$(key)])
A number of special functions can be used to set variables in cfengine.
You can import values from the execution of a shell command
by prefixing a command with the word exec. This method is deprecated
as of cfengine version 2; use the ExecResult function instead.
control:
# old method
listing = ( "exec /bin/ls -l" )
# new method
listing = ( ExecResult(/bin/ls -l) )
This sets the variable `listing' to the output of the command in the quotes. Some other built-in functions are
A(X,Y) control:
assoc_array = ( A(B,"is for bird") A(C,"is for cat") )
results in:
OBJECT: main
4569 : assoc_array[B]=is for bird
4630 : assoc_array[C]=is for cat
control:
binhost = ( A(linux,machine1) A(solaris,machine2) )
copy:
# Contact machine 1 for linux
# Contact machine 2 for solaris
/etc/source dest=/etc/receve server=$(binhost[$(class)])
ExecResult(command)ExecShellResult(command)RandomInt(a,b)ReadArray(filename,fileformat,separator,comment,Max number of bytes)autokeyReadArray tries to interpret the
file as a table of items separated with the separator character. Blank
lines and comments (to end of line) are ignored. Items are keyed
numerically starting from 1 to the maximum number in the file. The
newline $(n) is always considered to be a separator, no matter
what the current separator is.
textkeyReadArray tries to interpret the file as a list
of lines of the form:
key,value
ReadFile(filename,Max number of bytes)ReadTable(filename,fileformat,separator,comment,Max number of bytes)autokeyReadArray tries to interpret the
file as a table of items separated with the separator character. Blank
lines and comments (to end of line) are ignored. Items are keyed
numerically starting from 1 to the maximum number in the file. Any
lines that do not contain the correct number of separators cause the
function to fail without making any assignment.
textkeyReadArray tries to interpret the file as a list
of lines of the form:
key1,key2,value1
key3,key4,value2
This variable would then be references as $(table[key1][key2]).
ReadList(filename,fileformat,comment,Max number of bytes)linesReadList tries to interpret the file as a list of
items on separate lines. The value returned is a list formatted by the Split character.
hosts = ( ReadList(/var/cfengine/inputs/datafile,lines,#,1000) )
ReadTCP(host/IP,portnumber,send string,Max number of bytes)
one_host_only::
# USE WITH CAUTION !
probewww = ( ReadTCP(localhost,80,'GET index.html',1000) )
Or testing a network service:
control:
checkhost::
probesmtp = ( ReadTCP(localhost,25,"",1024) )
probewww = ( ReadTCP(project.iu.hio.no,80,"GET /viewcvs HTTP/1.0 ${n}${n}",1024) )
classes:
viewcvs_error = ( RegCmp(".*Python Traceback.*","${probewww}") )
alerts:
viewcvs_error::
"Received viewcvs error from web server"
SelectPartitionNeighbours(filename,comment,Policy,group size)
control:
allpeers = ( SelectPartitionNeighbours(/var/cfengine/inputs/cfrun.hosts,#,random,4) )
copy:
/data/file dest=/p2prepository/file server=$(allpeers)
SelectPartitionLeader(filename,comment,Policy,group size)
control:
leader = ( SelectPartitionLeader(/var/cfengine/inputs/cfrun.hosts,#,random,4) )
copy:
/data/file dest=/p2prepository/file server=$(leader)
control:
variable2 = ( RandomInt(0,23) )
variable3 = ( ExecResult(/bin/ls -a /opt) )
myexcerpt = ( ReadFile("/etc/services",220) )
listvar = ( ReadArray(/tmp/array,textkey,",","#",100) )
In the latter case, the file could look like this:
host$ more /tmp/array
one,String to tbe read
two,Nothing string
three,Everything comes in threes
and results in the definition of (verify with cfagent -p -d3):
OBJECT: main
960 : listvar[one]=String to tbe read
259 : listvar[two]=Nothing string
224 : listvar[three]=Everything comes in threes
Variables are referred to in either of two different ways, depending on
your taste. You can use the forms $(variable) or
${variable}. The variable in braces or parentheses can be the
name of any user defined macro, environment variable or one of the
following special built-in variables.
AllClassesarchbinservercfinputs_versionChecksumDatabaseChecksumUpdatesclasssun4, hpux). A constant.
datedomainEmailFromEmailMaxLinesinf, no maximum is enforced.
EmailTosysadm variable).
facultysite).
fqhosthostipaddressipv4[interface]
${global.ipv4[hme0]}
${global.ipv4[eth0]}
MaxCfenginesostype$(arch).
OutputPrefixOutputPrefix = ( "cfengine:$(host):")
RepCharsite$(faculty) and may be used interchangeably.
smtpserversplitsysadmtimezonecontrol.
UnderscoreClassesversionyearThese variables are kept special because they play a special role in setting up a system configuration. You are encouraged to use them to define fully generalized rules in your programs. Variables can be used to advantage in defining filenames, directory names and in passing arguments to shell commands. The judicious use of variables can reduce many definitions to a single one if you plan carefully.
|
NOTE: the above control variables are not case sensitive, unlike user macros, so you should not define your own macros with these names. |
The following variables are also reserved and may be used to produce troublesome special characters in strings.
crcolondblquote"
dollarlfnquote'.
spctabVariables can be used as iterators in some situations. Iteration over lists is currently rather limited in cfengine and is something to be improved on in a future version. When a variable is used as an iterator, a character is chosen to represent a list separator, as in the shell ‘IFS’ variable. The default separator is the colon ‘:’ character:
control:
listvar = ( one:two:three:four )
The action that contains a variable to be interpreted as a list appears as separate actions, one for each case:
shellcommand:
"/bin/echo $(listvar)"
is equivalent to
shellcommand:
"/bin/echo one"
"/bin/echo two"
"/bin/echo three"
"/bin/echo four"
If multiple iterators are used, these are handled as nested loops:
cfengine::/bin/echo one 1: one 1
cfengine::/bin/echo one 2: one 2
cfengine::/bin/echo one 3: one 3
cfengine::/bin/echo one 4: one 4
cfengine::/bin/echo two 1: two 1
cfengine::/bin/echo two 2: two 2
cfengine::/bin/echo two 3: two 3
cfengine::/bin/echo two 4: two 4
cfengine::/bin/echo three: three 1
cfengine::/bin/echo three: three 2
cfengine::/bin/echo three: three 3
cfengine::/bin/echo three: three 4
cfengine::/bin/echo four : four 1
cfengine::/bin/echo four : four 2
cfengine::/bin/echo four : four 3
cfengine::/bin/echo four : four 4
Where iterators are not allowed, the implied lists are treated as scalars:
alerts:
amnexus::
"do $(list1) $(list2)"
e.g.
cfengine:: do one:two:three:four 1:2:3:4
Iterative expansion is currently restricted to:
A cfengine action looks like this:
action-type:
compound-class::
declaration
A single class is an identifier that may consist of any alphanumeric character or the underscore, just like identifiers in ordinary programming languages. Classes that are derived from data like IP addresses or host names convert any other characters (like ‘.’ or ‘-’) into underscores. A single class can be one of several things:
ultrix, sun4, etc.
This is referred to as a hard class.
Monday, Tuesday, Wednesday, ..).
Hr00, Hr01 ... Hr23).
Min00, Min17 ... Min45).
Min00_05, Min05_10 ... Min55_00)
Q1, Q2, Q3, Q4)
Hr00_Q1, Hr23_Q4 etc.)
Day1 ... Day31).
January, February, ... December).
Yr1997, Yr2004).
ipv4_192_0_0_1,
ipv4_192_0_0, ipv4_192_0, ipv4_192).
A compound class is a sequence of simple classes connected by dots or `pipe' symbols (vertical bars). For example:
myclass.sun4.Monday::
sun4|ultrix|osf::
A compound class evaluates to `true' if all of the individual classes
are separately true, thus in the above example the actions which follow
compound_class:: are only carried out if the host concerned is in
myclass, is of type sun4 and the day is Monday!
In the second example, the host parsing the file must be either of
type sun4 or ultrix or osf.
In other words, compound classes support two operators: AND and OR,
written ‘.’ and ‘|’ respectively.
From cfengine version 2.1.1,
I bit the bullet and added ‘&’ as a synonym for the AND operator.
Cfengine doesn't
care how many of these operators you use (since it skips over blank
class names), so you could write either
solaris|irix::
or
solaris||irix::
depending on your taste. On the other hand, the order in which cfengine evaluates AND and OR operations does matter, and the rule is that AND takes priority over OR, so that ‘.’ binds classes together tightly and all AND operations are evaluated before ORing the final results together. This is the usual behaviour in programming languages. You can use round parentheses in cfengine classes to override these preferences.
Cfengine allows you to define switch on and off dummy classes so that
you can use them to select certain subsets of action. In particular,
note that by defining your own classes, using them to make compound
rules of this type, and then switching them on and off, you can also
switch on and off the corresponding actions in a controlled way. The
command line options -D and -N can be used for this
purpose. See also addclasses in the Reference manual.
A logical NOT operator has been added to allow you to exclude
certain specific hosts in a more flexible way. The logical NOT
operator is (as in C and C++) ‘!’. For instance, the
following example would allow all hosts except for myhost:
action:
!myhost::
command
and similarly, so allow all hosts in a user-defined group mygroup,
except for myhost, you would write
action:
mygroup.!myhost::
command
which reads `mygroup AND NOT myhost'. The NOT operator can also be combined with OR. For instance
class1|!class2
would select hosts which were either in class 1, or those which were not in class 2.
Finally, there is a number of reserved classes. The following are hard classes for various operating system architectures. They do not need to be defined because each host knows what operating system it is running. Thus the appropriate one of these will always be defined on each host. Similarly the day of the week is clearly not open to definition, unless you are running cfengine from outer space. The reserved classes are:
ultrix, sun4, sun3, hpux, hpux10, aix, solaris, osf, irix4, irix, irix64
sco, freebsd, netbsd, openbsd, bsd4_3, newsos, solarisx86, aos,
nextstep, bsdos, linux, debian, cray, unix_sv, GnU, NT
If these classes are not sufficient to distinguish the hosts on your network, cfengine provides more specific classes which contain the name and release of the operating system. To find out what these look like for your systems you can run cfengine in `parse-only-verbose' mode:
cfagent -p -v
and these will be displayed. For example, Solaris 2.4 systems
generate the additional classes sunos_5_4 and sunos_sun4m,
sunos_sun4m_5_4.
Cfengine uses both the unqualified and fully host names as classes. Some
sites and operating systems use fully qualified names for their
hosts. i.e. uname -n returns to full domain qualified
hostname. This spoils the class matching algorithms for cfengine, so
cfengine automatically truncates names which contain a dot `.' at the
first `.' it encounters. If your hostnames contain dots (which do not
refer to a domain name, then cfengine will be confused. The moral is:
don't have dots in your host names! NOTE: in order to ensure that
the fully qualified name of the host becomes a class you must define the
domain variable. The dots in this string will be replaced by underscores.
In summary, the operator ordering in cfengine classes is as follows:
Cfengine provides a number of built-in functions for evaluating classes,
based on file tests. Using these built-in functions is quicker than
calling the shell test function. The time functions place their
arguments in chronological order.
AccessedBefore(f1,f2)
True if file 2 was accessed more recently than file 1 (UNIX atime), ie file 1 was Accessed Before file 2.
ChangedBefore(f1,f2)
True if file 2's attributes were changed in any way more recently than file 1's (UNIX ctime), ie file 1 was Changed Before file 2.
ClassMatch(regexp)
True if the quoted regular expression matches one of the currently defined classes. It is wise to place ClassMatch at the end of your parsing in order to capture as many of the user-defined classes as possible.
classes:
userdef = ( ClassMatch(.*linux.*) )
FileExists(file)
True if the named file object (file/directory or link) exists.
GroupExists(groupname|gid)
True if the groupname or group id is registered on the system.
HostRange(basename,start-stop)
True if the current relative domain name begins with basename and ends with an integer between start and stop. Note well: matching is case insensitive (both hostname and basename are converted to all lower case for comparison.)
IsDefined(variable-id)
True if the named variable is defined. Note well: use the variable name, not its contents (that is,
IsDefined(var), and not IsDefined(${var}))
IsDir(f)
True if the file f is a directory
IsLink(f)
True if the file f is a symbolic link
IsPlain(f)
True if the file f is a plain file
IsNewerThan(f1,f2)
True if file 1 was modified more recently than file 2 (UNIX mtime), ie file 1 Is Newer Than file2.
IPRange(address-range)
True if the current host lies within the specified IP range
PrepModule(module,arg1 arg2...)
True if the named module exists and can be executed. The module is assumed to follow the standard programming interface for modules (see Writing plugin modules in tutorial). Unlike actionsequence modules, these modules are evaluated immediately on parsing. Note that the module should be specified relative to the authorized module directory.
Regcmp(regexp,string or list separated string)
True if the string matched the regular expression regexp. Do not include any extraneous whitespace in the function arguments.
ReturnsZero(command)
True if the named shell command returns with exit code zero (success). The command is executed without a shell wrapper.
ReturnsZeroShell(command)
True if the named shell command returns with exit code zero (success) when executed in the environment of a shell wrapper.
Strcmp(s1,s2)
True if the string s1 exactly matches s2. Do not include any extraneous white space in the function.
UserExists(username|uid)
True if the username or user id is registered on the system (this does not imply that the user can log in or has a home directory).
IsGreaterThan(s1,s2)
Returns true if the value of s1 is greater than the value of s2. Note that, if the strings have numerical values, a numerical comparison is performed, otherwise a string comparison is used.
IsLessThan(s1,s2)
Returns true if the value of s1 is less than the value of s2. Note that, if the strings have numerical values, a numerical comparison is performed, otherwise a string comparison is used.
control:
actionsequence = ( files )
a = ( 2.12 )
b = ( 2.11 )
classes:
lt = ( IsLessThan(${a},${b}) )
gt = ( IsGreaterThan(${a},${b}) )
alerts:
lt:: "$(a) LESS THAN $(b)"
gt:: "$(a) GREATER THAN $(b)"
For example:
classes:
access_to_dir = ( ReturnsZero(/bin/cd /mydir) )
compare = ( ChangedBefore(/etc/passwd_master,/etc/passwd) )
isplain = ( IsPlain(/tmp/import) )
inrange = ( IPRange(128.39.89.10-15) )
CIDR = ( IPRange(128.39.89.10/24) )
compute_nodes = ( HostRange(cpu-,01-32)
gotinit = ( PrepModule(startup2,"arg1 arg2") )
acl:
class::
{ acl-alias
action
}
|
Cfengine's ACL feature is a common interface for managing
filesystem access control lists (ACLs). An access control list is an
extended file permission. It allows you to open or close a file to a
named list of users (without having to create a group for those users);
similarly, it allows you to open or close a file for a list of groups.
Several operating systems have access control lists, but each typically
has a different syntax and different user interface to this facility,
making it very awkward to use. This part of a cfengine configuration
simplifies the management of ACLs by providing a more convenient user
interface for controlling them and—as far as possible—a common
syntax.
An ACL may, by its very nature, contain a lot of information. Normally
you would set ACLs in a files command, See files, or a
copy command, See copy. It would be too cumbersome to repeat
all of the information in every command in your configuration, so
cfengine simplifies this by first associating an alias together with a
complex list of ACL information. This alias is then used to represent
the whole bundle of ACL entries in a files or copy
command. The form of an ACL is similar to the form of an
editfiles command. It is a bundle of information concerning a
file's permissions.
{ acl-alias
method:overwrite/append
fstype:posix/solaris/dfs/afs/hpux/nt
acl_type:user/group:permissions
acl_type:user/group:permissions
...
}
The name acl-alias can be any identifier containing alphanumeric characters and underscores. This is what you will use to refer to the ACL entries in practice. The method entry tells cfengine how to interpret the entries: should a file's ACLs be overwritten or only adjusted? Since the filesystems from different developers all use different models for ACLs, you must also tell cfengine what kind of filesystem the file resides on. Currently only Solaris and DCE/DFS ACLs are implemented.
NOTE: if you set both file permissions and ACLs the file permissions override the ACLs.
An access control list is build of any number of individual access control entries (ACEs). The ACEs has the following general syntax:
acl_type:user/group:permissions
The user or group is sometimes referred to as a key.
For an explanation of ACL types and their use, refer to your local
manual page. However, note that for each type of filesystem, there are
certain entries which must exist in an ACL. If you are creating a new
ACL from scratch, you must specify these. For example, in Solaris ACLs
you must have entries for user, group and other.
Under DFS you need what DFS calls a user_obj, group_obj
and an other_obj, and in some cases mask_obj. In cfengine
syntax these are called user:*:, other:*: and
mask:*:, as described below. If you are appending to an existing
entry, you do not have to re-specify these unless you want to change
them.
Cfengine can overwrite (replace) or append to one or more ACL entries.
overwritemethod:overwrite is the default. This sets the ACL according to
the specified entries which follow. The existing ACL will be
overwritten completely.
appendmethod:append adds or modifies one or more specified ACL entries.
If an entry already exists for the specified type and user/group, the
specified permission bits will be added to the old permissions. If there
is no ACL entry for the given type and user/group, a new entry will be
appended.
The individual bits in an ACE may be either added subtracted or set equal to a specified mask. The ‘+’ symbol means add, the ‘-’ symbol subtract and ‘=’ means set equal to. Here are some examples:
acltype:id/*:mask
user:mark:+rx,-w
user:ds:=r
user:jacobs:noaccess
user:forgiven:default
user:*:rw
group:*:r
other:*:r
The keyword noaccess means set all access bits to zero for that
user, i.e. remove all permissions. The keyword default means
remove the named user from the access crontrol list altogether, so that
the default permissions apply. A star/asterisk in the centre field
indicates that the user or group ID is implicitly specified as of the
owner of the file, or that no ID is applicable at all (as is the case for `other').
Under Solaris, the ACL type can be one of the following:
user
group
mask
other
default_user
default_group
default_mask
default_other
A user or group can be specified to the user, group, default_user and default_group types. Solaris ACL permissions are the normal UNIX permissions bits ‘rwx’, where:
r - Grants read privileges.
w - Grants write privileges.
x - Grants execute privileges.
In DCE, the ACL type can be one of the following:
other
mask
any
unauthenticated
user
group
foreign_other
foreign_user
foreign_group
The user, group, foreign_user and foreign_group
types require that you specify a user or group. The DCE documentation
refers to types user_obj, group_obj and so on. In the
cfengine implementation, the ugly ‘_obj’ suffix has been dropped to
make these more in keeping with the POSIX names. user_obj::, is
equivalent to user:*: is cfengine. The star/asterisk implies that
the ACL applies to the owner of the file object.
DFS permissions are comprised of the bits ‘crwxid’, where:
c - Grants control privileges, to modify an acl.
r - Grants read privileges.
w - Grants write privileges.
x - Grants execute privileges.
i - Grants insert privileges.
d - Grants delete privileges.
See the DCE/DFS documentation for more information about this.
It is not possible to set ACLs in foreign cells currently using cfengine, but you can still have all of your ACL definitions in the same file. You must however arrange for the file to be executed on the server for the cell concerned. Note also that you must perform a DCE login (normally as user ‘cell_admin’) in order to set ACLs on files which are not owned by the owner of the cfengine-process. This is because you must have a valid security ticket.
NT ACEs are written as follows:
acl_type:user/group:permissions:accesstype
The actual change consists of the extra field containing the access type. A star/asterisk in the field for user/group would normally imply that the ACL applies to the owner of the file object. However this functionality is as of today not yet implemented.
In NT, the ACL type can be one of the following:
user
group
Both types require that you specify the name of a user or a group.
NT permissions are comprised of the bits ‘rwxdpo’, where:
r - Read privileges
w - Write privileges
x - Execute privileges
d - Delete privileges
p - Privileges to change the permissions on the file
o - Privileges to take ownership of the file
In addition to any combination of these bits, the word noaccess
or default can be used as explained in the previous section. NT
comes with some standard, predefined permissions. The standards are only
a predefined combination of the different bits specified above and are
provided with cfengine as well. You can use the standards by setting the
permission to read, change or all. The bit
implementation of each standard is as on NT:
read - rx
change - rwxd
all - rwxdpo
where the bits follow the earlier definition. The keywords mentioned above can only be used alone, and not in combination with ‘+’, ‘-’, ‘=’ and/or other permission bits.
NT defines several different access types, of which only two are used in connection with the ACL type that is implemented in cfengine for NT. The access type can be one of the following:
allowed
denied
Intuitively, allowed access grants the specified permissions to
the user, whilst denied denies the user the specified
permissions. If no access type is specified, the default is
allowed. This enables cfengine's behaviour as on UNIX systems
without any changes to the configuration file. If the permissions
noaccess or default is used, the access type will be
irrelevant.
Here is an example of a configuration file for an NT ACL:
control:
actionsequence = ( files )
domain = ( iu.hioslo.no )
files:
$(HOME)/tt acl=acl_alias1 action=fixall
acl:
{ acl_alias1
method:overwrite
fstype:nt
user:gustafb:rwx:allowed
user:mark:all:allowed
user:toreo:read:allowed
user:torej:default:allowed
user:ds2:+rwx:allowed
group:dummy:all:denied
group:iu:read:allowed
group:root:all:allowed
group:guest:dpo:denied
}
Here is an example of a configuration file for one Solaris ACL and one DCE/DFS ACL:
control:
actionsequence = ( files )
domain = ( iu.hioslo.no )
files:
$(HOME)/tt acl=acl_alias1 action=fixall
/:/bigfile acl=acl_alias2 action=fixall
acl:
{ acl_alias1
method:overwrite
fstype:posix
user:*:rwx
user:mark:=rwx
user:sowille:=rx
user:toreo:=rx
user:torej:default
user:ds2:+rwx
group:*:rx
group:iu:r
group:root:x
mask:*:rx
other:*:rx
default_user:*:=rw
default_user:mark:+rwx
default_user:ds:=rwx
default_group::=r
default_group:iu:+r
default_mask::w
default_other::rwx
}
{ acl_alias2
method:overwrite
fstype:dfs
user:*:rwxcid
group:*:rxd
other:*:wxir
mask:*:rxw
user:/.../iu.hioslo.no/cell_admin:rc
group:/.../iu.hioslo.no/acct-admin:rwxcid
user:/.../iu.hioslo.no/root:rx
}
Alerts are normally just messages that are printed when classes become activated
in order to alert the system administrator to some condition that has arisen.
Alerts can also be special functions, like ShowState() that generate
system output.
Alerts cannot belong to the class any, that would generate a message from
every host. In a huge network this could result in vast amounts of Email. This behaviour
can be forced, however, by creating an alias for the class `any' that is defined on
the affected hosts.
alerts:
class::
quoted message
ifelapsed=time
audit=true/false
ShowState(parameter)
SysLog(priority,message)
SetState(name,ttl,policy)
UnSetState(name)
FriendStatus(hours)
PrintFile(filename,lines)
alerts:
myclass::
"Reminder: say hello every hour" ifelapsed=60
nfsd_in_high_dev2::
"High NFS server access rate 2dev at $(host) value $(value_nfsd_in) av $(average_nfsd_in) pm $(stddev_nfsd_in)"
ShowState(incoming.nfs)
# ROOT PROCS
anomaly_hosts.RootProcs_high_dev2::
"RootProc anomaly high 2 dev on $(host) value $(value_rootprocs) av $(average_rootprocs) pm $(stddev_rootprocs)"
ShowState(rootprocs)
The ShowState() function reports on state gathered by the cfenvd
daemon.
ShowState(incoming.tcpsyn)
ShowState(outgoing.smtp)
ShowState(incoming.www)
ShowState(outgoing.www)
ShowState(procs)
ShowState(rootprocs)
ShowState(otherprocs)
ShowState(users)
To limit the frequency of alerts, you can set locking times:
# ROOT PROCS
anomaly_hosts.RootProcs_high_dev2::
"RootProc anomaly high 2 dev on $(host) value $(value_rootprocs) av $(average_rootprocs) pm $(stddev_rootprocs)"
ShowState(rootprocs) ifelapsed=10 expireafter=20
Alerts can also be channeled directly to syslog, to avoid extraneous console messages or email.
SysLog(LOG_ERR,"Test syslog message")
One application for alerts is to pass signals from one cfengine to another by persistent, shared memory. For example, suppose a short-lived anomaly event triggers a class that relates to a security alert. The event class might be too short-lived to be followed up by cfagent in full. One could thus set a long term class that would trigger up several follow-up checks. A persistent class could also be used to exclude an operation for an interval of time.
Persistent class memory can be added through a system alert functions to give timer behaviour. For example, consider setting a class that acts like a non-resettable timer. It is defined for exactly 10 minutes before expiring.
SetState("preserved_class",10,Preserve)
Or to set a class that acts as a resettable timer. It is defined for 60 minutes unless the SetState call is called again to extend its lifetime.
SetState(non_preserved_class,60,Reset)
Existing persistent classes can be deleted with:
UnsetState(myclass)
The FriendStatus function is available from version 2.1.4 and
displays a message if hosts that normally have a cfengine protocol
connection with the current host have not connected for more than than
specified number of hours. If the number of hours is set to zero,
cfengine uses a machine-learned expectation value for the time and uses
this to report. The friend status of a host is thus the expectation that
there is a problem with a remote peer. Expected contact rates of more than
the variable LastSeenExpireAfter are ignored as spurious, See lastseenexpireafter.
The PrintFile function can be used to display short excerpts from text files.
The arguments are the filename and a maximum number of lines to be printed.
The binservers declaration need only be used if you are using
cfengine's model for mounting NFS filesystems. This declaration informs
hosts of which other hosts on the network possess filesystems containing
software (binary files) which client hosts should mount. This includes
resources like programs in /usr/local and so on. A host may have
several binary servers, since there may be several machines to which
disks are physically attached. In most cases, on a well organized
network, there will be only one architecture server per UNIX
platform type, for instance a SunOS server, an ULTRIX server and so on.
Binary servers are defined as follows:
binservers:
physics.sun4:: sunserver sunserver2
physics.linux:: linuxserver
The meaning of this declaration is the following. All hosts of type
sun4 which are members of the group physics should mount
any binaries declared in the mountables resource list which
belong to hosts sunserver or sunserver2. Similarly all
linux machines should mount binary filesystems in the mountables
list from linuxserver.
Cfengine knows the difference between binaries and home directories in
the mountables list, because home directories match the pattern
given by homepattern. See homepattern. See homeservers.
Note that every host is a binary server for itself, so that the first
binary server (and that with highest priority) is always the current
host. This ensures that local filesystems are always used in preference
to NFS mounted filesystems. This is only relevant in connection with
the variable $(binserver).
This information is used to configure the network interface for each host.
Every local area network has a convention for determining which internet
address is used for broadcast requests. Normally this is an address of
the form aaa.bbb.ccc.255 or aaa.bbb.ccc.0. The difference
between these two forms is whether all of the bits in the last number
are ones or zeroes respectively. You must find out which convention is
used at your establishment and tell cfengine using a declaration of the
form:
broadcast:
any::
ones # or zeros, or zeroes
In most cases you can use the generic class any, since all of the
hosts on the same subnet have to use the same convention. If your
configuration file encompasses several different subnets with different
conventions then you will need to use a more specific.
Cfengine computes the actual value of the broadcast address using the value specified above and the netmask See netmask.
The fundamental piece of any cfengine script or configuration file is the control section. If you omit this part of a cfengine script, it will not do anything! The control section is used to define certain variables, set default values and define the order in which the various actions you have defined will be carried out. Because cfengine is a declarative or descriptive language, the order in which actions appear in the file does not necessarily reflect the order in which they are executed. The syntax of declarations here is:
control:
classes::
variable = ( list or value function(args) )
|
The control section is a sequence of declarations which looks something like the following example:
control:
site = ( univ )
domain = ( univ.edu )
sysadm = ( admin@computing.univ.edu )
netmask = ( 255.255.252.0 )
timezone = ( EDT )
nfstype = ( nfs )
childlibpath = ( /usr/local:/mylibs )
sensiblesize = ( 1000 )
sensiblecount = ( 2 )
editfilesize = ( 4000 )
actionsequence =
(
links.some
mountall
links.others
files
)
myvariable = ( something )
mymacro = ( somethingelse )
myrandom = ( RandomInt(3,6) )
myexcerpt = ( ReadFile("/etc/services",220))
Parentheses are required when making a declaring information in cfengine. Note that a limited number of built-in functions exists:
ExecResult(command) Executes the named shell command and
inserts the output into the variable. Note that, when this is used in
cfengine built-in list variables, any spaces are interpreted as list
separators. In other lists, normal rules for iteration apply.
RandomInt(a,b)
Is substituted for a random number between (a,b).
ReadFile(filename,Max number of bytes)
A maximum number of bytes is read from the named file and placed in a variable.
The meaning of each of these lines is described below.
The AbortClasses list is a list of class identifiers that will
result in the abortion of the current cfagent instanitation with an error message
containing the name of the offending class.
AbortClasses = ( emergency nologin_exists )
This mechanism allows one to make controlled exceptions at the agent level. For example
control:
actionsequence = ( shellcommands )
AbortClasses = ( danger_will_robinson )
shellcommands:
"shellcom 1"
"shellcom 2" define=ok elsedefine=danger_will_robinson
The access list is a list of users who are to be allowed to
execute a cfengine program. If the list does not exist then all users
are allowed to run a program.
access = ( user1 user2 ... )
The list may consist of either numerical user identifiers or valid usernames from the password database. For example:
access = ( mark aurora 22 456 )
would restrict a script to users mark, aurora and user id 22 and 456.
The action sequence determines the order in which collective actions are carried out. Here is an example containing the full list of possibilities:
actionsequence =
(
mountall # mount filesystems in fstab
mountinfo # scan mounted filesystems
checktimezone # check timezone
netconfig # check net interface config
resolve # check resolver setup
unmount # unmount any filesystems
packages # install/upgrade/remove packages
shellcommands # execute shell commands
editfiles # edit files
addmounts # add new filesystems to system
directories # make any directories
links # check and maintain links (single and child)
mailcheck # check mailserver
mountall # (again)
required # check required filesystems
tidy # tidy files
disable # disable files
files # check file permissions
copy # make a copy/image of a master file
processes # signal / check processes
module:name # execute a user-defined module
)
Here is a more complete description of the meaning of these keywords.
addmountsmountinfo, so it should normally only be
called after mountinfo. If the filesystem already appears
to be in the filesystem table, a warning is issued.
checktimezonedirectoriesdirectories
section of the program. It builds new directories.
disabledisable
section of the program.
editfileseditfiles
section of the program.
filesfiles
section of the program.
linkslinks
section of the program.
mailcheckmailserver section of the cfengine program. If the current host
is the same as the mailserver (the host which has the physical spool
directory disk) nothing is done. Otherwise the filesystem table is
edited so as to include the mail directory.
module module:mytests
"module:mytests arg1 arg2 .."
declares a user defined module which can potentially set the classes
class1 etc. Classes returned by the module must be declared so
that cfengine knows to pay attention to rules which use these classes
when parsing; this is done using AddInstallable. If
arguments are passed to the module, the whole string must be quoted like
a shellcommand. See Writing plugin modules. Whether or not these
classes become set or not depends on the behaviour of your module. The
classes continue to apply for all actions which occur after the module's
execution. The module must be owned by the user executing cfengine or
root (for security reasons), it must be named
module:module-name and must lie in a special directory,
See moduledirectory.
mountalladdmounts and
mailcheck to be actually mounted. This should probably be called
both before mountinfo and after addmounts etc. A short
timeout is placed on this operation to avoid hanging RPC connections
when parsing NFS mounted file systems.
mountinfonetconfigrequiredrequired
section of the program. It checks for the absence of
important NFS resources.
resolvepackagespackages section
of the program. This will query the system's package database
for the specified packages, at the specified versions, set
classes based on whether or not those packages exist, and
optionally install, upgrade or remove those packages using a
pre-defined package manager command.
shellcommandsshellcommands
section of the program.
tidytidy
section of the program.
unmountunmount
section of the program. The filesystem table is edited
so as to remove the unwanted filesystems and the unmount
operation is executed.
processesprocesses section
of the program.
Under normal circumstances this coarse ordering is enough to suit most purposes. In some cases you might want to, say, only perform half the link operations before mounting filesystems and then, say, perform the remainder. You can do this (and similar things) by using the idea of defining and undefining classes.
The syntax
actionsequence =
(
links.firstpass.include
...
links.secondpass
)
means that cfengine first executes links with the classes
firstpass and include defined. Later it executes
links with secondpass defined. You can use this method of
adding classes to distinguish more finely the flow of control in
programs.
A note about style: if you define and undefine lots of classes to do
what you want to do, you might stop and ask yourself if your
groups are defined as well as they should be. See groups.
Programming in cfengine is about doing a lot for only a little
writing. If you find yourself writing a lot, you are probably not going
about things in the right way.
AddClasses = ( list of identifiers )
The AddClasses directive is used to define a list of class
attributes for the current host. Normally only the hard classes defined
by the system are `true' for a given host. It is convenient though to
be able to define classes of your own to label certain actions, mainly
so that they can later be excluded so as to cut short or filter out
certain actions. This can be done in two ways. See actionsequence.
To define a list of classes for the current session, you write:
AddClasses = ( exclude shortversion )
This is equivalent to (though more permanent than) defining
classes on the command line with the -D option.
You can now use these to qualify actions. For example
any.exclude::
...
Under normal circumstances exclude is always true — because you
have defined it to be so, but you can undefine it in two ways so
as to prevent the action from being carried out. One way is to undefine
a class on the command line when you invoke cfengine:
| host# cfengine -N exclude |
or
| host# cfengine -N exclude.shortversion host# cfengine -N a.b.c.d |
These commands run cfengine with the named classes undefined. That means that actions labelled with these classes are excluded during that run.
Another way to restrict classes is to add a list of classes to be undefined in the actionsequence. See next section.
AddInstallable = ( list of identifiers )
Some actions in your cfengine program will be labelled by classes which
only become defined at run time using a define= option. Cfengine
is not always able to see these classes until it meets them and tries to
save space by only loading actions for classes which is believes will
become defined at some point in the program. This can lead to some
actions being missed if the action is parsed before the place where the
class gets switched on, since cfengine is a one-pass interpreter,. To
help cfengine determine classes which might become defined during
a run, you can declare them in this list. It does no harm to declare
classes here anyway.
Here is an example where you need to declare a class because of the ordering
of the actions.
control:
AddInstallable = ( myclass )
files:
myclass::
/tmp/test mode=644 action=fixall
copy:
/tmp/foo dest=/tmp/test define=myclass
If we remove the declaration, then when cfengine meets the files command, it skips it because it knows nothing about the class ‘myclass’—when the copy command follows, it is too late. Remember that imported files are always parsed after the main program so definitions made in imported files always come later than things in the main program.
Normally cfagent warns about redefinitions of variables during parsing. This is presumed to be a mistake. To avoid this behaviour, add the name of the variable to this list, and the warning disappears.
control:
actionsequence = ( copy )
AllowRedefinitionOf = ( cfrep )
cfrep = ( bla )
cfrep = ( blo )
If this variable is set to true then cfengine conducts extensive auditing of its actions to a database in the work directory. When rules are applied, their locations and policy version are recorded also so that it is possible to see exactly which rule was applied and when. It is assumed that the version is recorded as below:
control:
cfinputs_version = ( 1.2.1 )
Auditing = true
This variable acts as the global default behaviour and may be
overriden locally by audit=true/false attributes, where applicable.
control:
hup_syslogd::
autodefine = ( /etc/syslog.c* )
Referring to the class that prefixes the command, autodefine is
a list of file patterns that will define the said class, if a named file is copied
in any statement. This helps to avoid having to write a large number
of file-specific copy: lines with define=class configured. In the example
above, the class hup_syslogd would be defined if /etc/syslog.conf
is copied at any time.
BinaryPaddingChar = ( \0 )
This specifies the type of character used to pad strings of unequal
length in editfiles during binary editing. The default value is
the space character, since this is normally used to edit filenames
or text messages within program code.
If this is set to a specific IP address of an IP configured interface, cfagent will use that address for outgoing connections. On Multi-homed hosts this allows one to restrict the traffic to a known interface. An interface must be configured with an IP address in order to be bound.
This feature is not available for old operating systems.
ChecksumDatabase = ( /var/cfengine/cfdb )
If this filename is defined, cfengine will use it to store
message digests (i.e. cryptographic checksums) of files
for security purposes, See files, checksum=.
This option was deprecated in 2.1.22.
ChecksumPurge = ( on )
This variable defaults to `off'. If set to true, cfagent will look at all of the registered files in the database and check whether thet still exist. If the file no longer exists, it is removed from the database and a warning is issued.
To purge files now and then, but at no particular time, one could do something like this:
strategies:
{ purging
NowAndThen: 1
ElseWhen: 49
}
control:
NowAndThen::
ChecksumPurge = ( on )
ChecksumUpdates = ( on )
This variable defaults to `off'. If set to true, cfagent will automatically update the checksum of a file, if it changes on the disk. This means that a security warning will be issued only once about files which have changed, and the changed version will be re-registered as the correct version. This option could be switched on after a system upgrade, for instance, in order to update the database, and then switched to `off' again to reduce the risk of missing a security alert. Alternatively, if you are confident that the first message is sufficient, it can be left as `on' so that only one message is given.
Specified the name of a program that is used in the files action=compress
attribute.
CompressCommand = ( /usr/bin/gzip )
Sets a value for LD_LIBRARY_PATH in child processes:
childlibpath = ( /usr/local/lib:/local/mysql/lib )
Note that the variables LD_LIBRARY_PATH is special. This library path is needed to run processes as children of cfengine. Often, if the agent is started from cron (which is started by init), there is no suitable library path set, and shellcommands will fail with strange errors about not being able to load shared objects. Setting a library path here is a useful way of correcting this problem.
This list is used to define a global list of names or patterns which are to be copied rather than linked symbolically. For example
CopyLinks = ( *.config )
The same facility can be specified for each individual
link operation using the copy option See links.
Copying is performed using a file age comparison.
Note that all entries defined under a specified class are valid only as long as that class is defined. For instance
class::
CopyLinks = ( pattern )
would define a pattern which was only valid when class is defined.
This parameter determines the default form of copying for all copy operations
parsed after this variable. The legal values are
ctime (intial default), mtime, checksum and binary.
e.g.
DefaultCopyType = ( mtime )
Sets the default value of the pkgmgr attribute for
packages items.
DefaultPkgMgr = ( rpm )
By default, this variable is not set, meaning there will be no
package manager selected, and each item in the packages
section must specify its own package manager, or it will not be
checked. For information on the values of this variable, See packages.
If this parameter is set to true, cfengine will delete files which do not have a name belonging to a known user id.
DeleteNonUserFiles = ( true )
SpoolDirectories = ( /var/spool/cron/crontabs )
This is an generalization of DeleteNonUserMail and makes it redundant. it is formally executed as a part of the “tidy” action.
If this parameter is set to true, cfengine will delete files on mailservers whose names do not correspond to a known user name, but might be owned by a known user.
DeleteNonOwnerFiles = ( true )
SpoolDirectories = ( /var/spool/cron/crontabs )
This is an generalization of DeleteNonOwnerMail and makes it redundant.
If this parameter is set to true, cfengine will delete mail files on mailservers which do not have a name belonging to a known user id. This does not include lock files.
If this parameter is set to true, cfengine will delete files on mailservers whose names do not correspond to a known user name, but might be owned by a known user.
domain = ( domain name )
This variable defines the domainname for your site. You must define it
here, because your system might not know its domainname when you run
cfengine for the first time. The domainname can be used as a cfengine
variable subsequently by referring to $(domain). The domainname
variable is used by the action resolve. The domain is also used
implicitly by other matching routines. You should define the domain as
early as possible in your configuration file so as to avoid problems,
especially if you have the strange practice of naming hosts with their
fully qualified host names since groups which use fully qualified names
can fail to be defined if cfengine is not able to figure out the domain name.
Sets the command used to install packages that need to be installed under the DPKG package manager.
DPKGInstallCommand = ( "/usr/bin/pkgmgr %s" )
By default, this variable is not set, meaning that any packages with action=install will NOT be installed if installation is required. Note the "'s around the string, and the %s is replaced with the name of the package to be installed.
DryRun = ( on/off )
This variable has the same effect as the command line options --dry-run or -n. It tells cfengine to only report what it should do without actually doing it.
classes::
DryRun = ( on )
EditBinaryFileSize = ( size )
Cfengine will refuse to edit a file which is larger than the value of
editbinaryfilesize in bytes. This is to prevent possible
accidents from occurring. The default value for this variable is 10000000
bytes. If you don't like this feature, simply set the value to be a
very large number or to zero. If the value is zero, cfengine will
ignore it.
EditfileSize = ( size )
This variable is used by cfengine every time it becomes necessary to edit a file. Since file editing applies only to text files, the files are probably going to be relatively small in most cases. Asking to edit a very large (perhaps binary) file could therefore be the result of an error.
A check is therefore made as a security feature. Cfengine will refuse
to edit a file which is larger than the value of editfilesize in
bytes. This is to prevent possible accidents from occurring. The
default value for this variable is 10000 bytes. If you don't like this
feature, simply set the value to be a very large number or to zero.
If the value is zero, cfengine will ignore it.
EmptyResolvConf = ( true )
Normally cfengine does not tidy up old entries in the /etc/resolv.conf file. This option causes cfengine to remove all existing content from the file.
This variable defaults to “on”. If set to “off”, no exclamation marks (Br. pling, Am: shriek) are printed during security alerts, e.g. for checksum violations.
Exclamation = ( off )
This list is used to define a global list of names or patterns which are to be excluded from copy operations. For example
ExcludeCopy = ( *~ *% core )
The same facility can be specified for each individual
link operation using the exclude option See copy.
Note that all entries defined under a specified class are valid only as long as that class is defined. For instance
class::
ExcludeCopy = ( pattern )
would define a pattern which was only valid when class is defined.
This list is used to define a global list of names or patterns which are to be excluded from linking operations. For example
ExcludeLink = ( *~ *% core )
The same facility can be specified for each individual
link operation using the exclude option See links.
Note that all entries defined under a specified class are valid only as long as that class is defined. For instance
class::
ExcludeLink = ( pattern )
would define a pattern which was only valid when class is defined.
If you change the value of this parameter, it should be one of the first things you do in your configuration script.
This parameter controls the global value of the ExpireAfter parameter. This parameter controls the maximum time in minutes which a cfengine action is allowed to live. After this time a second cfengine agent will try to kill the cfengine which seems to have hung and attempt to restart the action. This is different from a TimeOut, where an internal alarm interrupt is used.
ExpireAfter = ( time-in-minutes )
|
This parameter may also be set per action in the action
sequence by appending a pseudo-class called ExpireAftertime.
For instance,
actionsequence = ( copy.ExpireAfter15 )
sets the expiry time parameter to 15 minutes for this copy command.
This method should be considered old and deprecated however.
As of version 2.1.0, you can define the expiry time on a per-command basis,
as options of the form expireafter=10.
Sets the path to `pkg_add' which is used to install packages that need to be installed under FreeBSD.
FreeBSDInstallCommand = ( "/usr/sbin/pkg_add -r %s" )
By default, this variable is not set, meaning that any packages with
action=install will NOT be installed. Note the quotes around the string,
and the %s is replaced with the name of the package to be installed.
Sets the path to `pkg_delete' which is used to remove packages that need to be uninstalled under FreeBSD.
FreeBSDRemoveCommand = ( "/usr/sbin/pkg_delete %s" )
By default, this variable is set to /usr/sbin/pkg_delete, meaning that any
packages with action=remove will be removed. Note the quotes around the
string, and the %s is replaced with the name of the package to be installed.
From version 2.1.22. This is false for protocol compatability with older servers.
If this is set to true, directory filenames are encrypted in addition to file contents. If transferred data are not especially secret or travel over public networks this is a waste of CPU time. In high security environments it provides full privacy of data transmission.
FullEncryption = ( true )
|
HomePattern = ( list of patterns )
The homepattern variable is used by the cfengine model for
mounting nfs filesystems. It is also used in the evaluation of the
pseudo variable home, See files, tidy.
homepattern is in fact a list and is used like a wildcard or
pattern to determine which filesystems in the list of mountables
are home directories. See mountables. This relies on your sticking
to a rigid naming convention as described in the first reference above.
For example, you might wish to mount (or locate directly if you are not
using a separate partition for home directories) your home directories
under mountpattern in directories u1, u2 and so on.
In this case you would define homepattern to match these numbers:
homepattern = ( u? )
Cfengine now regards any directory matching
$(mountpattern)/u? as being a user login directory.
Suppose you want to create mount home directories under
$(mountpattern)/home and make subdirectories for staff and
students. Then you would be tempted to write:
HomePattern = ( home/staff home/students )
Unfortunately this is not presently possible. (This is, in principle, a bug which should be fixed in the future.) What you can do instead is to achieve the same this as follows:
MountPattern = ( /$(site)/$(host) /$(site)/$(host)/home )
HomePattern = ( staff students )
If this variable is set to true/on, it causes cfagent to lookup and store trusted public keys according to their DNS fully qualified host name, instead of using the IP address. This can be useful in environments where hosts do not have fixed IP addresses, but do have fixed hostnames.
HostnameKeys = ( on )
This method of storing keys is not recommended for sites with fixed IP addresses, since it removes one security barrier from a potential attacker by potentially allowing DNS spoofing.
Note that there is a corresponding variable to be set in cfrun.hosts which must be set for consistency.
If you change the value of this parameter, it should be one of the first things you do in your configuration script.
This parameter controls the global value of the IfElapsed parameter, This parameter controls the minimum time which must have elapsed for an action in the action sequence before which it will be executed again.
IfElapsed = ( time-in-minutes )
|
This parameter may also be set per action in the action
sequence by appending a pseudo-class called IfElapsedtime.
For instance,
ActionSequence = ( copy.IfElapsed15 )
sets the elapsed time parameter to 15 minutes for this copy command.
This method should be considered old and deprecated however.
As of version 2.1.0, you can define the expiry time on a per-command basis,
as options of the form ifelapsed=15.
Use this regular expression to suppress FriendStatus warnings for matching hosts. e.g.
IgnoreFriendRegex = ( "2001:700:.*|host1|host2" )
Use this regular expression to delete class information about interfaces that you do not want to see on a host. This is useful for tamig virtual machines and their multitudinous interfaces.
IgnoreInterfaceRegex = ( "vm.*" )
Inform = ( on/off )
This variable switches on the output level whereby cfengine
reports changes it makes during a run. Normally only
urgent messages or clear errors are printed. Setting
Inform to on makes cfengine report on
all actions not explicitly cancelled with a `silent' option.
To set this output level one writes:
classes::
Inform = ( on )
If you have an operating system which is installed on some non-standard hardware, you might have to specifically set the name of the network interface. For example:
control:
nextstep.some::
InterfaceName = ( en0 )
nextstep.others::
InterfaceName = ( ec0 )
It is only necessary to set the interface name in this fashion if you have an operating system which is running on special hardware. Most users will not need this. The choice set here overrides the system defaults and the choices made in the cfrc file, See cfrc resource file.
This list may be used to define a number of extensions which are regarded as being plain files by the system. As part of the general security checking cfengine will warn about any directories which have names using these extensions. They may be used to conceal directories.
FileExtensions = ( c o gif jpg html )
This option is true by default. If set to off or false it prevents cfengine and/or cfservd from learning about last times hosts were observed connecting to one another. Some users with broken resolvers (particularly in view of the change over to IPv6 compatible libraries) might find this useful when processes appear to hang on connecting.
LastSeen = ( off )
This value (in days) sets the time after which unseen friend hosts
are purged from the `last seen' database, as viewed by the FriendStatus
function, See alerts.
LastSeenExpireAfter = ( 2 )
This list is used to define a global list of names or patterns which are to be linked symbolically rather than copied. For example
excludelinks = ( *.gif *.jpg )
The same facility can be specified for each individual
link operation using the symlink option See copy.
Note that all entries defined under a specified class are valid only as long as that class is defined. For instance
class::
LinkCopies = ( pattern )
would define a pattern which was only valid when class is defined.
This is now deprecated.
Specify an alternative directory for keeping cfengine's log data. This defaults to /var/run/cfengine or /var/cfengine.
LogDirectory = ( /var/cfengine )
LogTidyHomeFiles = ( off )
If set to “off”, no log is made of user files, in their home directories, of the files which are tidied by cfengine.
moduledirectory = ( directory for plugin modules )
This is the directory where cfengine will look for plug-in modules for the actionsequence, See actionsequence. Plugin modules may be used to activate classes using special algorithms. This variable defaults to /var/cfengine/modules for privileged users and to $HOME)/.cfengine/modules for non-privileged users.
mountpattern = ( mount-point )
The mountpattern list is used by the cfengine model for mounting
nfs filesystems. It is also used in the evaluation of the
pseudo variable home, See files, tidy.
It is used together with the value of homepattern to locate and
identify what filesystems are local to a given host and which are
mounted over the network. For this list to make sense you need to
stick to a rigid convention for mounting your filesystems under a single
naming scheme as described in the section mentioned above. If you
follow the recommended naming scheme then you will want to set the value
of mountpattern to
mountpattern = ( /$(site)/$(host) )
which implies that cfengine will look for local disk partitions under a unique directory given by the name of the host and site. Any filesystems which are physically located on the current host lie in this directory. All mounted filesystems should lie elsewhere. If you insist on keeping mounted file systems in more than one location, you can make a list like this:
mountpattern = ( /$(site)/users /$(site)/projects )
netmask = ( aaa.bbb.ccc.ddd )
The netmask variable defines the partitioning of the subnet addresses on
your network. Its value is defined by your network administrator. On
most systems it is likely to be 255.255.255.0. This is used to
configure the network interface in netconfig.
See actionsequence.
Every host on the internet has its own unique address. The addresses
are assigned hierarchically. Each network gets a domain name and
can attach something like 65,000 hosts to that network. Since this is
usually too many to handle in one go, every such network may be divided
up into subnets. The administrator of the network can decide how the
division into subnets is made. The decision is a trade-off between
having many subnets with few hosts, or many hosts on few subnets. This
choice is made by setting the value of a variable called netmask.
The netmask looks like an internet address. It takes the form:
aaa.bbb.ccc.mmm
The first two numbers ‘aaa.bbb’ are the address of the domain. The
remainder ‘ccc.mmm’ specifies both the subnet and the hostname.
The value of netmask tells all hosts on the network: how many of
the bits in the second half label different subnets and how many label
different hosts on each of the subnets?
The most common value for the netmask is ‘255.255.255.0’. It is most helpful to think of the netmask in terms of bits. Each base-10 number between 0-255 represents 8 bits which are either set or not set. Every bit which is set is a network address and every bit which is zero is part of a host address. The first two parts of the address ‘255.255’ always takes these values. If the third number is ‘255’, it means that the domain is divided up into 256 sub networks and then the remaining bits which are zero can be used to give 255 different host addresses on each of the subnets.
If the value had been ‘255.255.255.254’, the network would be divided up into 2^15 subnets, since fifteen of the sixteen bits are one. The remaining bit leaves enough room for two addresses 0 and 1. One of those is reserved for broadcasts to all hosts, the other can be an actual host — there would only be room for one host per subnet. This is a stupid example of course, the main point with the subnet mask is that it can be used to trade subnets for hosts per subnet. A value of ‘255.255.254.0’ would allow 128 different subnets with 2*256-1 = 511 hosts on each.
We needn't be concerned with the details of the netmask here. Suffice it to say that its value is determined for your entire domain by the network administrator and each host has to be told what the value is.
Each host must also know what convention is used for the broadcast address. This is an address which hosts can send to if they wish to send a message to every other host on their subnet simultaneously. It is used a lot by services like NIS to ask if any hosts are willing to perform a particular service. There are two main conventions for the broadcast address: address zero (all host bits are zero) and the highest address on the subnet (all host bits are ones). The convention can be different on every subnet and it is decided by the network administrator. When you write a cfengine program you just specify the convention used on your subnet and cfengine works out the value of the broadcast address from the netmask and the host address See broadcast. Cfengine works out the value of the broadcast address using the value of the netmask.
If enabled, this option causes cfengine to detect and
disable files which have purely non-alphanumeric
filenames, i.e. files which might be accidental or
deliberately concealed. The files are then marked
with a suffix .cf-nonalpha and are rendered
visible.
NonAlphaNumFiles = ( on )
These files can then be tidied by searching for the suffix. Note that alphanumeric means ascii codes less than 32 and greater than 126.
nfstype = ( nfs-type )
This variable is included only for future expansion. If you do not define this variable, its value defaults to “nfs”.
At present cfengine operates only with NFS (the network file system). When cfengine looks for network file systems to mount, it adds lines in the filesystem table (‘/etc/fstab’,‘/etc/checklist’ etc.) to try to mount filesystems of type “nfs”. In principle you might want to use a completely different system for mounting filesystems over the network, in which case the `mount type' would not be “nfs” but something else.
At the time of writing certain institutions are replacing NFS with AFS (the Andrew filesystem) and DFS (from the distributed computing environment). The use of these filesystems really excludes the need to use the mount protocol at all. In other words if you are using AFS or DFS, you don't need to use cfengine's mounting commands at all.
Sets the path to `emerge' which is used to install packages that need to be installed under Gentoo Portage.
gentoo.some::
DefaultPkgMgr = ( portage )
PortageInstallCommand = ( "/usr/bin/emerge --nocolor %s" )
gentoo.other::
DefaultPkgMgr = ( portage )
PortageInstallCommand = ( "/usr/lib/portage/bin/emerge --color=n %s"
By default, this variable is not set, meaning that any packages with
action=install will NOT be installed if installation is required. Note
the quotes around the string, and the %s is replaced with the name
of the package to be installed.
RepChar = ( character )
The value of this variable determines the characters which is used by cfengine in creating the unique filenames in the file repository. Normally, its value is set to ‘_’ and each ‘/’ in the path name of the file is changed to ‘_’ and stored in the repository. If you prefer a different character, define it here. Note that the character can be quoted with either single or double quotes in order to encompass spaces etc.
Repository = ( directory )
Defines a special directory where all backup and junk
files are collected. Files are assigned a unique filename
which identifies the path from which they originate.
This affects files saved using disable, copy,
links and editfiles.
The default value of the Red Hat Package manager command /bin/rpm can be altered for non-standard systems with this variable.
RPMcommand = ( /usr/bin/rpm )
Sets the command used to install packages that need to be installed under the RPM package manager.
RPMInstallCommand = ( "/usr/bin/pkgmgr %s" )
By default, this variable is not set, meaning that any packages with
action=install will NOT be installed if installation is required. Note
the quotes around the string, and the %s is replaced with the name
of the package to be installed.
control:
DefaultPkgMgr = ( rpm )
RPMInstallCommand = ( "/usr/bin/yum -d 0 -e 0 -y install %s" )
# This would remove all dependencies (!)
#
# RPMRemoveCommand = ( "/usr/bin/yum -d 0 -e 0 -y remove %s" )
# This might be less drastic
RPMRemoveCommand = ( "/bin/rpm -e --nodeps %s" )
packages:
# this will remove this package regardless of version.
some_rpm_name version=0:0.0 cmp=ge action=remove
schedule = ( Min00_05 Min30_35 time class )
When cfexecd is used in daemon mode, it defaults to running
once an hour, on the hour, i.e..
schedule = ( Min00_05 )
This can be extended to make the agent run more often. The time specifiers are cfengine classes, and are written as intervals of time rather the precise times. Cfengine's time resolution is purposely limited to five minutes because the auto-correlation time of user resources is generally greater than this. Thus, it is assumed that precision timing is not required and the start time of cfengine, when scheduled in daemon mode, is not better than a few minutes. The daemon does not require precision, but offers many other strategic features for load balancing and security.
Other time classes can be used in the schedule list, but note that cfexecd will not run the agent more than once every five minutes. This is treated as a fundamental granularity.
SecureInput = ( on )
If this is set cfengine will not import files which are not owned by the uid running the program, or which are writable by groups or others.
SensibleCount = ( count )
This variable is used by the action required. It defines for
cfengine what you consider to be the minimum number of files in a
`required' directory. If you declare a directory as being required,
cfengine will check to see if it exists. Then, if the directory
contains fewer than the value of sensiblecount files, a warning
is issued. The default value for this variable is 2.
SensibleSize = ( size )
This variable is used by the action required. It defines for
cfengine what you consider to be the minimum size for a `required' file.
If you declare a file as being required, cfengine will check to see if
the file exists. Of course, the file may exist but be empty, so the
size of the file is also checked against this constant. If the file is
smaller than the value of sensiblesize a warning is issued. The
default value for this variable is 1000 bytes.
ShowActions = ( on )
This causes cfengine to produce detailed output of what action is being carried out as part of the prefix information during output. This is intended only for third party tools which collect and parse the cfengine output. It will be of little interest to humans.
singlecopy = ( path_and_filename_wildcard )
If a singlecopy pattern is defined the behavior of copy: is
modified so that a given destination file, matching the pattern, will
only be updated once. In other words, if someone tries to copy more
then one source file to the same location, the destination will not be
overwritten in the same run. If the path name and wildcard is any of '*',
'on' or 'true', then the list applies to all files.
For example:
control:
actionsequence = ( copy )
singlecopy = ( /tmp/* )
addinstallables = ( zzz )
zzz::
autodefine = ( /tmp/* )
copy:
/etc/passwd dest=/tmp/destination type=binary
/etc/group dest=/tmp/destination type=binary
alerts:
zzz::
"Copied something in /tmp"
Note (Warning) that this feature has several problems. It assumes an order dependence that cfengine generally tries to avoid. The first copy that takes place wins. Also, if files are locked at different times, this can result in oscillations between several different source files. e.g.
copy:
/etc/passwd dest=/tmp/bla type=binary ifelapsed=2
/etc/group dest=/tmp/bla type=binary ifelapsed=1
In order to avoid explicit looping, cfengine assumes that a file has been copied even if no actual copy took place – i.e. as long as a file is apparently up to date, that counts as a valid copy update and the promise/action is considered done. If this were not the case, then the following promises would still be in line for execution and cfengine would loop between the different versions on subsequent invocations.
site = ( sitename )
faculty = ( facultyname )
This variable defines a convenient name for your site configuration. It is useful for making generic rules later on, because it means for instance that you can define the name of a directory to be
/$(site)/$(host)/local
without having to redefine the rule for a specific site. This is a handy trick for making generic rules in your files which can be imported into a configuration for any site.
faculty is a synonym for site. The two names
may be used interchangeably.
SkipIdentify = ( true )
This is the client side directive corresponding to the server
directive SkipVerify. It tells cfengine not to assume that
the client is registered in the Domain Name Service (DNS). Sometimes
the assumption of DNS registration can break connectivity between hosts,
particularly if firewalls or Network Address Translation is in use.
smtpserver = ( mailhost )
This variable specified the destination for Email sent by cfexecd.
SplayTime = ( time-in-minutes )
This variable is used to set the maximum time over which cfengine will share its load on a server.
Split = ( character )
The value of this variable is used to define the list separator in variables which are expected to be treated as lists. The default value of this variable is the colon ‘:’. Cfengine treats variables containing this character as lists to be broken up and iterated over, See Iteration over lists.
This typically allows communication with PATH-like environment variables in the shell.
A list of additional spool directories for cfengine to police. In these
directories, filenames should correspond to existing users of the
system. When users lost their accounts, this list plus the mail spool
directory will be checked for files owned by deprecated users.
See also: DeleteNonOwnerFiles, DeleteNonUserFiles.
SpoolDirectories = ( /var/spool/cron/crontabs /var/spool/cron/atjobs )
Sets the command used to install packages that need to be installed under the SUN package manager.
SUNInstallCommand = ( "/usr/bin/pkgmgr %s" )
By default, this variable is not set, meaning that any packages with
action=install will NOT be installed if installation is required. Note
the quotes around the string, and the %s is replaced with the name
of the package to be installed.
SuspiciousNames = ( .mo lrk3 )
Filenames in this list are treated as suspicious and generate a warning as cfengine scans directories. This might be used to detect hacked systems or concealed programs. Checks are only made in directories which cfengine scans in connection with a command such as files, tidy or copy.
sysadm = ( mail address )
The mail address of your system administrator should be placed here.
This is used in two instances. If cfengine is invoked with the option
-a, then it simply prints out this value. This is a handy
feature for making scripts.
The administrators mail address is also written into the personal log files which cfengine creates for each user after tidying files, so you should make this an address which users can mail if they have troubles.
Syslog = ( on/off )
This variable activates syslog logging of cfengine output at the `inform' level.
To set this output level one writes:
classes::
Syslog = ( on )
SyslogFacility = ( facility )
This variable alters the syslog facility level. e.g.
SyslogFacility = ( LOG_LOCAL1 )
Valid arguments are
LOG_USER
LOG_DAEMON
LOG_LOCAL0
LOG_LOCAL1
LOG_LOCAL2
LOG_LOCAL3
LOG_LOCAL4
timezone = ( 3-character timezone )
The timezone variable is a list of character strings which define your local timezone. Normally you will only need a single timezone, but sometimes there are several aliases for a given timezone e.g. MET and CET are synonymous. Currently only the first three characters of this string are checked against the timezone which cfengine manages to glean from the system. If a mismatch is detected a warning message is printed. cfengine does not attempt to configure the timezone. This feature works only as a reminder, since the timezone should really be set once and for all at the time the system is installed. On some systems you can set the timezone by editing a file, a procedure which you can automate with cfengine See editfiles.
The value of the timezone can be accessed by variable substitution
in the usual way. It expands to the first item in your list.
shellcommands:
"echo ${timezone} | mail ${sysadm}"
TimeOut = ( 10 )
The default timeout for network connections is 10 seconds. This is too short on some routed networks. It is not permitted to set this variable smaller than 3 seconds or larger than 60 seconds. A timeout is generated by an `alarm' interrupt within an executing agent. This is constrasted with ExpireAfter, in which a second agent is required to interrupt the activity.
Verbose = ( on/off )
This variable switches on the output level whereby cfengine reports everything it does during a run in great detail. Normally only urgent messages or clear errors are printed, See Inform. This option is almost equivalent to using the --verbose of -v command-line options. The only difference is that system environment reporting information, which is printed prior to parsing, is not shown. To set this output level on selected hosts one writes:
classes::
Verbose = ( on )
For related more limited output, See Inform.
Warnings = ( on/off )
This variable switches on the parser-output level whereby cfengine reports non-fatal warnings. This is equivalent to setting the command line switch --no-warn, or -w. To set this output level on selected hosts one writes:
classes::
Warnings = ( on )
If this parameter is set to true, cfengine will warn about files in spool directories which do not have a name belonging to a known user id.
See also DeleteNonUserFiles.
If this parameter is set to true, cfengine will warn about files on mailservers whose names do not correspond to a known user name, but might be owned by a known user.
SpoolDirectories = ( /var/spool/cron/crontabs )
WarnNonOwnerFiles = ( true )
See also DeleteNonOwnerFiles. This generalizes and succeeds DeleteNonOwnerMail.
If this parameter is set to true, cfengine will warn about mail files on mailservers which do not have a name belonging to a known user id. This does not include lock files.
If this parameter is set to true, cfengine will warn about files on mailservers whose names do not correspond to a known user name, but might be owned by a known user.
The classes keyword is an alias for groups as of
version 1.4.0 of cfengine.
Cfengine copies files between locally mounted filesystems and via the network from registered servers. The copy algorithm avoids race-conditions which can occur due to network and system latencies by copying first to a file called file.cfnew on the local filesystem, and then renaming this quickly into place. The aim of this roundabout procedure is to avoid situations where the direct rewriting of a file is interrupted midway, leaving a partially written file to be read by other processes. Cfengine attempts to preserve hard links to non-directory file-objects, but see the caution below. Caution should be exercised in copying files which change rapidly in size. This can lead to file corruption, if the size changes during copying. Cfengine attempts to prevent this during remote copies.
The syntax summary is:
copy:
class::
master-file
dest=destination-file
mode=mode
owner=owner
group=group
action=warn/silent/fix
backup=true/false/timestamp
repository=backup directory
stealth=true/on/false/off
checkroot=true/on/false/off
timestamps=preserve/keep
symlink=pattern
include=pattern
exclude=pattern
ignore=pattern
filter=filteralias
xdev=true/on/false/off
recurse=number/inf/0
type=ctime/mtime/checksum/sum/byte/binary/any
linktype=absolute/symbolic/relative/hard/none/copy
typecheck=true/on/false/off
define=class-list(,:.)
elsedefine=class-list(,:.)
force=true/on/false/off
forcedirs=true/on/false/off
forceipv4=true/on/false/off
size=size limits
server=server-host
failover=classes
trustkey=true/false
secure=[deprecated]
encrypt=true/false
verify=true/false
oldserver=true/false
purge=true/false
syslog=true/on/false/off
inform=true/on/false/off
audit=true/false
findertype=MacOSX finder type
|
Note that the $(this) contains the name of the server
used. This variable may be used in the source and destination strings
in order to tailor the filename when downloading from multiple sources
(see below).
destrecurse option is required to copy the contents of subdirectories.
If the destination file name is of the form filename/..namedfork/rsrc, then it is assumed that you are copying the resource fork of a file to an HFS+ file system on OS X Jaguar. In the absence of the destination file being in this form (just dest=filename), cfengine will assume that you are working with the data fork of the file. See dest.
For a resource fork copy to properly work, the data fork must have already been copied. Ie the OS will not allow you to copy the resource fork for a file that does not exist. And, copying a data fork after the resource fork will overwrite the resource fork. So, order is important. Copy the data fork, first. Then, copy the resource fork.
To split the data and resource forks of a file into two parts, open up a terminal. The following commands will copy MyFile 's data and resource forks into two separate files which can then be recombined by cfengine:
cp MyFile MyFile-datafork
cp MyFile/..namedfork/rsrc MyFile-rsrcfork
mode, owner, groupfiles function
See files.
actionwarn, silent or
fix. The default action is fix, i.e. copy files. If
warn is specified, only a warning is issued about files which
require updating. If silent is given, then cfengine will copy
the files but not report the fact.
forceforceipv4forcedirsbackupbackup option is set to “false”, cfengine
will not make a backup copy of the file before copying. The default value is “true”.
If the option “timestamp” is chosen, a unique timestamp will be appended
to the saved filename.
repositoryRepository variable, on an item
by item basis. If set to “off” or “none” it cancels the value of a global repository.
Copy makes a literal image of the master file at the destination,
checking whether the master is newer than the image. If the image needs
updating it is copied. Existing files are saved by appending
.cfsaved to the filename.
stealthcheckrootfalse, this option causes cfengine to check the
permissions of the root directory during recursive directory
copies. If not true, cfengine sets its own permissions on the root.
timestampstar command.
recurseinf.
Cfengine crosses device boundaries or mounted filesystems when
descending recursively through file trees. To prevent
this it is simplest to specify a maximum level of recursion.
symlinkignoreincludeIf the purge option is used in copying, then the ignore option
has the effect of the excluding files from the purge, i.e. ignore means
`keep' the named files.
excludexdevtypefindertype If the file also has an extension (for example .txt),
then if setting the finder type code, you should make sure your finder
type code does not conflict with the file extension.
Files both without extensions and finder type codes are mostly useless to OS X, so be sure to do one or the other!
Also note that finder type codes should not be applied to the resource forks of files.
servercfservd daemon, and you must make sure that you
have defined the variable domain in the control section
of the cfagent.conf file. If you don't define a domain
you will probably receive an error of the form `cfengine: Hey! cannot
stat file'. If the server name is `localhost', cfengine will perform a local
copy, without using a connection to cfservd.
failoveroldservertrustkeyencryptverifysize
numberbytes
numberkbytes
numbermbytes
Only the first characters of these strings are significant, so they may be written however is convenient: e.g. 14kB, 14k, 14kilobytes etc. Examples are:
size=<400 # copy if file size is < 400 bytes
size=400 # copy if file size is equal to 400 bytes
size=>400 # copy if file size > 400 bytes
linktypesymlink. The default type is a direct symbolic
link. The values ‘relative’ or ‘absolute’ may be used, but
hard links may not be created in place of copied files, since hard links
must normally reside on the same filesystem as their files, and it
is assumed that most links will be between filesystems. If this value
is set to copy or none, symbolic links will be replaced
by actual copies of the files they point to. Note that for directories,
this option is ignored.
typecheckdefinepurgeforcedirs=true, typecheck=false, since
other defaults could be very destructive.
Example:
copy:
/local/etc/aliases dest=/etc/aliases m=644 o=root g=other
/local/backup-etc dest=/etc
solaris::
/local/etc/nsswitch.conf dest=/etc/nsswitch.conf
In the first example, a global aliases file is copied from the master site file /local/etc/aliases to /etc/aliases, setting the owner and protection as specified. The file gets installed if /etc/aliases doesn't exist and updated if /local/etc/aliases is newer than /etc/aliases. In the second example, backup-etc is a directory containing master configuration files (for instance, services, aliases, passwd...). Each of the files in backup-etc is installed or updated under /etc. Finally, a global nsswitch.conf file is kept up to date for Solaris systems.
The home directive can be used as a destination, in which
case cfengine will copy files to every user on the system. This is
handy for distributing setup files and keeping them updated:
copy:
/local/masterfiles/.cshrc dest=home/.cshrc mode=0600
You can force the copying of files, regardless of the date stamps
by setting the option force=true or force=on. The default
is force=false or force=off.
Hard links are not like symbolic links, they are not merely pointers to other files, but alternative names for the same file. The name of every file is a hard link, the first so to speak. You can add additional names which really are the file, they are not just pointers. For the technically minded, they are not separate inodes, they are additional directory references to the same inode. When you perform a copy operation on multiple files, cfengine attempts to preserve hard links but this is a difficult task.
Because a hard link just looks like an ordinary file (it cannot be distingiushed from the original, the way a symbolic link can) there is a danger that any copy operation will copy two hard links to the same file as two separate copies of the same file. The difference is that changes a hard-linked file propagate to the links, whereas two copies of a file are completely independent thereafter. In order to faithfully reproduce all hardlinks to all files, cfengine needs to examine every file on the same filesystem and check whether they have the same inode-number. This would be an enourmous overhead, so it is not done. Instead what happens is that cfengine keeps track of only the files which it is asked to examine, for each atomic copy-command, and makes a note of any repeated inodes within this restricted set. It does not try to go off, wandering around file systems looking to other files which might be hardlinks.
To summarize, cfengine preserves hardlinks during copying, only within the scope of the present search. No backups are made of hard links, only of the first link or name of the file is backed up. This is a necessary precaution to avoid dangling references in the inode table. As a general rule, hard links are to be avoided because they are difficult to keep track of.
In long recursive copies, where you descend into many levels of diretories, you can quickly run out of file descriptors. The number of file descriptors is a resource which you can often set in the shell. It is a good idea to set this limit to a large number on a host which will be copying a lot of files. For instance, in the C shell you would write,
limit descriptors 1024
Most systems should have adequate defaults for this parameter, but on some systems it appears to be set to a low value such as 64, which is not sufficient for large recursive tree searches.
Dynamical routing is not configurable in cfengine, but for machines with static routing tables it is useful to check that a default route is configured to point to the nearest gateway or router. The syntax for this statement is simply:
defaultroute:
class::
my_gateway
For example:
defaultroute:
most::
129.240.22.1
rest::
small_gw
no_default_route::
192.168.1.1
Gateways and routers usually have internet address aaa.bbb.ccc.1
— i.e. the first address on the subnet. You may use the numerical
form or a hostname for the gateway.
The class no_default_route is defined if the current host does not have a currently
defined default route, but specifies one in its configuration.
This is a synonyn for required, See required.
This action tests for the existence of a file or filesystem. It should
be called after all NFS filesystems have been mounted. You may use the
special variable $(binserver) here.
disks:
/filesystem freespace=size-limit define=class-list(,:.)
inform=true
log=true
audit=true/false
scanarrivals=true
force=true
ifelapsed=mins
expireafter=mins
|
Files or filesystems which you consider to be essential to the operation of the system can be declared as `required'. Cfengine will warn if such files are not found, or if they look funny.
Suppose you mount your filesystem /usr/local via NFS from some
binary server. You might want to check that this filesystem is not
empty! This might occur if the filesystem was actually not
mounted as expected, but failed for some reason. It is therefore not
enough to check whether the directory /usr/local exists, one must
also check whether it contains anything sensible.
Cfengine uses two variables: sensiblesize and
sensiblecount to figure out whether a file or filesystem is
sensible or not. You can change the default values of these variables
(which are 1000 and 2 respectively) in the control section.
See control.
If a file is smaller than sensiblesize or does not exist, it
fails the `required' test. If a directory does not exist, or contains
fewer than sensiblecount files, then it also fails the test and a
warning is issued.
disks:
any::
/$(site)/$(binserver)/local
If you set the freespace variable to a value and set inform=true,
cfagent issues warnings when free disk space falls below this threshold.
Any define-classes also become defined in this instance.
(the default units are kilobytes,
but you may specify bytes or megabytes), e.g.
required:
/site/host/home1 freespace=50mb define=dotidy
/site/host/home2 freespace=10% define=dotidy
then cfengine will warn when the filesystem concerned has less than this
amount of free space. By adding a define tag, you can switch on
any number of classes if this happens. This allows you to activate special
measures for dealing with a filesystem which is in danger of becoming
full.
If the option force=true is used, cfengine will parse filesystems
even on NFS mounted filesystems. Normally it does not make sense to
check filesystems that are not native to the local host, but occasionally
ne would like to force such a check in order to set a class, based on the
result, for instance.
If the scanarrivals option is set, the agent will recursively descend
through the file system building a database of file modification times. This
data is used for research purposes and will eventually be used to trigger
classes that determine optimal times for backup of filesystem.
Directories declarations consist of a number of directories to be
created. Directories and files may also be checked and created using
the touch option in the files actions. See files.
The form of a declaration is:
directories:
classes::
/directory
mode=mode
owner=uid
group=gid
rxdirs=true/on/false/off
define=classlist
elsedefine=classlist
syslog=true/on/false/off
inform=true/on/false/off
audit=true/on/false/off
ifelapsed=mins
expireafter=mins
|
For example
directories:
class::
/usr/local/bin mode=755 owner=root group=wheel
The form of the command is similar to that of files but this
command is only used to create new directories. Valid options are
mode, owner, group and rxdirs; these are described under
files See files. This interface is only for convenience.
It is strictly a part of the `files' functionality and is performed
together with other `files' actions at run time.
The creation of a path will fail if one of the links in the path is a plain file or device node. A list of classes may optionally be defined here if a directory is created.
If the owner value is set to the literal "LastNode", then the
owner will be exchanged for the last node of the path. This allows the
creation of home directories owned by users.
control:
homedirs = ( mark:simen:luke:aeleen )
directories:
/home/$(listcontent) owner=LastNode
Disabling a file means renaming it so that it becomes harmless. This feature is useful if you want to prevent certain dangerous files from being around, but you don't want to delete them— a deleted file cannot be examined later. The syntax is
disable:
class::
/filename
dest=filename
type=plain/file/link/links
rotate=empty/truncate/numerical-value
size=numerical-value
define=classlist
syslog=true/on/false/off
inform=true/on/false/off
audit=true/on/false/off
repository=destination directory
action=disable/warn
ifelapsed=mins
expireafter=mins
|
If a destination filename is specified, cfagent renames the source file to the destination, where possible (renaming across filesystems is not allowed). If no destination is given, cfagent renames a given file by appending the name of the file with the suffix .cfdisabled. Note that directories are only renamed if they have a specific destination specified.
A typical example of a file you would probably want to disable would be
the /etc/hosts.equiv file which is often found with the ‘+’
symbol written in it, opening the system concerned to the entire NIS
universe without password protection!
Here is an example:
disable:
/etc/hosts.equiv
/etc/nologin
/usr/lib/sendmail.fc
sun4::
/var/spool/cron/at.allow
Hint: The last example disables a file which restricts access to the
at utility. Such a command could be followed by a file action,
See files,
files:
some::
/var/spool/cron/at.allow =0644 N owner=root group=wheel touch
which would create an empty security file at.allow.
See also your system manual pages for the at command if you don't
understand why this could be useful.
Disabling a link deletes the link. If you wish you may use the optional syntax
disable:
/directory/name type=file
to specify that a file object should only be disabled if it is a plain
file. The optional element type= can take the values
plain, file, link or links. If one of
these is specified, cfengine checks the type and only disables
the object if there is a match. This allows you to disable a file
and replace it by a link to another file for instance.
NOTE that if you regularly disable a file which then gets recreated by
some process, the disabled file filename.cfdisabled will
be overwritten each time cfengine disables the file and therefore the
contents of the original are lost each time. The rotate facility
was created for just this contingency.
The disable feature can be used to control the size of system log files,
such as /var/adm/messages using a further option rotate.
If the value rotate is set to 4, say,
disable:
filename rotate=4
then cfengine renames the file concerned by appending `.1' to it and a new, empty file is created in its place with the same owner and permissions. The next time disable is executed `.1' is renamed to `.2' and the file is renamed `.1' and a new empty file is created with the same permissions. Cfengine continues to rotate the files like this keeping a maximum of four files. This is similar to the behaviour of syslog.
If you simply want to empty the contents of a log file, without
retaining a copy then you can use rotate=empty or
rotate=truncate. For instance,
to keep control of your World Wide Web server logs:
disable:
Sunday|Wednesday::
/usr/local/httpd/logs/access_log rotate=empty
This keeps a running log which is emptied each Sunday and Wednesday.
The size= option in disable allows you to carry out a disable
operation only if the size of the file is less than, equal to or greater
than some specified size. Sizes are in bytes by default, but
may also be quoted in kilobytes or megabytes using the notation:
numberbytes
numberkbytes
numbermbytes
Only the first characters of these strings are significant, so they may be written however is convenient: e.g. 14kB, 14k, 14kilobytes etc. Examples are:
size=<400 # disable if file size is < 400 bytes
size=400 # disable if file size is equal to 400 bytes
size=>400 # disable if file size > 400 bytes
This options works with rotate or normal disabling; it is just
an extra condition which must be satisfied.
If a disable command results in action being taken by cfengine, an optional
list of classes becomes can be switched on with the aid of a statement
define=classlist in order to trigger knock-on actions.
The repository declaration allows a local override of the
Repository variable, on an item by item basis. If set to “off” or
“none” it cancels the value of a global repository and leaves the disabled
file in the same directory.
Performs ascii (line-based) editing on text-files or limited binary
editing of files. If editing a file which has hard links to it, be
aware that editing the file will destroy the hard link references. This
is also the case with shell commands. You should avoid hard links
whenever possible.
The form of an editing command is
editfiles can also search directories recursively through directories
and edit all files matching a pattern, using Include, Exclude, and
Ignore (see Recursive File Sweeps in the tutorial).
editfiles:
class::
{ file-to-be-edited
action "quoted-string..."
}
{ directory-to-be-edited
Recurse "inf" # iterated over all files
Filter "filteralias"
Include ".cshrc"
Ignore "bin"
Ignore ".netscape"
action "quoted-string..."
}
|
Here are some examples:
editfiles:
sun4::
{ /etc/netmasks
DeleteLinesContaining "255.255.254.0"
AppendIfNoSuchLine "128.39 255.255.255.0"
}
PrintServers::
{ /etc/hosts.lpd
AppendIfNoSuchLine "tor"
AppendIfNoSuchLine "odin"
AppendIfNoSuchLine "borg"
}
The first of these affects the file /etc/netmasks on all SunOS 4 systems, deleting any lines containing the string “255.255.254.0” and Appending a single line to the file containing “128.39 255.255.255.0” if none exists already. The second affects only hosts in the class `PrintServers' and adds the names of three hosts: tor, odin and borg to the file /etc/hosts.lpd which specifies that they are allowed to connect to the printer services on any host in the class `PrintServers'.
Note that single or double quotes may be used to enclose strings in cfengine. If you use single quotes, your strings may contain double quotes and vice-versa. Otherwise a double quoted string may not currently contain double quotes and likewise for single quoted strings.
As of version 2.0.6 quoted strings may contain escaped quotes
using \".
As of version 1.3.0, you can use the ‘home’ directive in edit filenames, enabling you to edit files for every user on the system, provided they exist. For example, to edit every user's login files, you would write
{ home/.cshrc
AppendIfNoSuchLine "setenv PRINTER default-printer"
AppendIfNoSuchLine "set path = ( $path /new/directory )"
}
If a user does not possess the named file, cfengine just skips that user. A new file is not created.
The meanings of the file-editing actions should be self-explanatory.
Commands containing the word 'comment' are used to `comment out' certain
lines in a file rather than deleting them. Hash implies a shell
comment of the type
# comment
Slash implies a comment of the C++ type:
// comment
Percent implies a comment of the type:
% comment
More general comment types may be defined using the
SetCommentStart, SetCommentEnd and
CommentLinesMatching, CommentLinesStarting
functions.
A special group of editing commands is based on the POSIX Regular Expression package. These use regular expressions to search line by line through text and perform various editing functions. Searches are of two different types: “LineMatching” and “LineContaining”. In the first case the regular expression must match the entire line exactly; in the latter, a substring is searched for in the file.
Some of these commands are based on the concept of a file pointer. The
pointer starts at line one of the file and can be reset by 'locating' a
certain line, or by using the reset-pointer commands. The current
position of the pointer is used by commands such as InsertLine to
allow a flexible way of editing the middle of files.
A simple decision mechanism is incorporated to allow certain editing actions to be excluded. For instance, to insert a number of lines in a file once only, you could write:
{ file
LocateLineMatching "insert point..."
IncrementPointer "1"
BeginGroupIfNoMatch "# cfengine - 2/Jan/95"
IncrementPointer "-1"
InsertLine "# cfengine - 2/Jan/95"
InsertLine "/local/bin/start-xdm"
DefineInGroup "AddedXDM"
EndGroup
}
Since the first inserted line matches the predicate on subsequent calls, the grouped lines will only be carried out once. When the grouped lines are run, the ‘AddedXDM’ class will be activated for use by a later part of the script.
The full list of editing actions is given below in alphabetical order. Note that some commands refer to regular expressions and some refer to 'literal strings' (i.e. any string which is not a regular expression). Variable substitution is performed on all strings. Be aware that symbols such as ‘.’, ‘*’ and so on are meta-characters in regular expressions and a backslash must be used to make them literal. The regular expression matching functions are POSIX extended regular expressions.
| Editfile caution. It is suggested that you use these editing functions with caution. Although all possible safeguards have been incorporated into them, it is still possible through carelessness to do damage to important files on your system. Always test editing programs carefully before committing them to your global site configuration. |
AbortAtLineMatching quoted-regex
This command sets the value of a regular expression. In all editing
operations (except FixEndOfLine and GotoLastLine) which involve multiple
replacements and searches, this expression marks a boundary
beyond which cfengine will cease to look any further. In other
words, if cfengine encounters a line matching this regular
expression, it aborts the current action. BE CAREFUL with this
feature: once set, the string remains set for the remainder of
the current file. It might therefore interact in unsuspected ways
with other search parameters. Editing actions are always aborted
as soon as the abort expression is matched.
Use UnsetAbort to unset the feature.
Append quoted-regex
Add a line containing the quoted string to the end of the file.
This should be used in conjunction with the
decision structures BeginGroupIfNoLineMatching and
BreakIfLineMatches.
AppendIfNoLineMatching quoted-regex/ ``ThisLine''
A new version of the older AppendIfNoSuchLine
which uses a regular expression instead of a literal
string. The line which gets appended must be set
previously using SetLine. If ``ThisLine'' is
given as the argument, the current value of then line buffer
is assumed. This allows constructions for merging files
on a convergent line-by-line basis:
editfiles:
{ /tmp/bla
ForEachLineIn "/tmp/in"
AppendIfNoLineMatching "ThisLine"
EndLoop
}
AppendIfNoSuchLine quoted-string
Add a line containing the quoted string to the end of the file if the file doesn't contain the exact line already.
AppendIfNoSuchLinesFromFile filename
For each line in the named file, call AppendIfNoSuchLine. This adds lines containing the strings listed in the named file to the end of the current file if the file doesn't contain the exact line already.
AppendToLineIfNotContains quoted-string
This commands looks for an exact match of the quoted string in the current line. If the quoted string is not contained in the line, it is appended. This may be used for adding entries to a list.
Audit true/false
Local decision about whether this edit stanza will be audited. Requires auditing to be on globally for this to have an effect.
If this command is listed anywhere in the file action list, cfengine will create the named file if it doesn't exist. Normally cfengine issues an error if the named file does not exist, but if this is set, notification of the file's absence is only in verbose output. New files are created with mode 644 (see also Umask), read access for everyone and write access for the cfengine user (normally root). Note that if you set this, BeginGroupIfFileIsNewer will always be true.
AutomountDirectResources quoted-string
This command is designed to assist with automounter configuration for
users wishing to use the automounter for NFS filesystems, but still use
the cfengine mount model.
Applied to the current file, it is equivalent to saying: for each of the
mountable resources in the list See mountables, append if not found a
line for a direct automount map command, to the current file. The
string which follows can be used to specify any special mount options
e.g. ``-nosuid'' for non setuid mounting (of all the
mountables). Note that this is added to the current file and not to a
file named /etc/auto_direct.
Backup quoted-string
Set to true or false, on or off to set backup policy for this file. Default is on. The default is to produce time-stamped backups of files; this may be coded explicitly by setting to “timestamp” or “stamp”. If set to “false” or “off”, no backup is kept of the edited file. If the value is set to “single” or “one” then only the last version of the file is kept, overwriting any previously saved versions.
See copybackup.
Backup "single"
BeginGroupIfDefined quoted-string
The lines following, up to the first EndGroup
are executed if the quoted class is defined. Edit groups may be nested.
BeginGroupIfNotDefined quoted-string
The lines following, up to the first EndGroup
are executed if the quoted class is not defined. Edit groups may be nested.
BeginGroupIfFileExists quoted-string
The lines following, up to the first EndGroup
are executed if the quoted filename exists (can be statted).
Files which are not readable by the running process are
for all intents and purposes non-existent. Edit groups may be nested.
BeginGroupIfFileIsNewer quoted-string
The lines following, up to the first EndGroup
are executed if the quoted filename is newer than the file being
edited. Edit groups may be nested.
BeginGroupIfLineContaining quoted-string
The lines following, up to the first EndGroup
are executed if the quoted string appears in
any line in the file. Edit groups may be nested.
BeginGroupIfLineMatching quoted-regex
The lines following, up to the first EndGroup
are executed if the quoted regular expression
matches any line in the file. Edit groups may be nested.
BeginGroupIfMatch quoted-regex
The lines following, up to the first EndGroup
are executed if the quoted regular expression matches the current line. Edit groups may be nested.
BeginGroupIfNoLineContaining quoted-string
The lines following, up to the first EndGroup
are executed if the quoted string does not appear in
any line in the file. Edit groups may be nested.
BeginGroupIfNoLineMatching quoted-regex
The lines following, up to the first EndGroup
are executed if the quoted regular expression
does not match any line in the file. Edit groups may be nested.
BeginGroupIfNoMatch quoted-regex
The lines following, up to the first EndGroup
are executed if the quoted regular expression does
not match the current line. Edit groups may be nested.
BeginGroupIfNoSuchLine quoted-string
The lines following, up to the first EndGroup
are executed if the quoted literal string
does not match any line in the file. Edit groups may be nested.
BreakIfLineMatches quoted-regex
Terminates further editing of the current file if the current line matches the quoted regular expression.
Edit actions which abort on failure (such as LocateLineMatching)
will jump to the first instance of this marker instead of completely
aborting an edit if this keyword occurs in an editing script.
You can catch the exceptions thrown by the following commands:
CommentNLines,CommentToLineMatching,DeleteNLines,DeleteToLineMatching,
HashCommentToLineMatching,IncrementPointer,
LocateLineMatching,PercentCommentToLineMatching,
RunScriptIf(No)LineMatching,UnCommentNLines.
CommentLinesMatching quoted-regex
Use the current value of the comment delimiters
set using SetCommentStart and SetCommentEnd to comment
out lines matching the given regular expression in quotes.
CommentLinesStarting quoted-string
Use the current value of the comment delimiters
set using SetCommentStart and SetCommentEnd to comment
out lines starting with the quoted literal string.
CommentNLines quoted-string
Comments up to N lines from the current file, starting from the
location of the current line pointer. If the end of the file is reached
and less than N lines are deleted, a warning is issued, but
editing continues. The current value of the comment delimiters is
used to determine the method of commenting, (see SetCommentStart).
After the operation the pointer points to the line after the
commented lines.
CommentToLineMatching quoted-regex
Use the current value of the comment delimiters set using
SetCommentStart and SetCommentEnd to comment out lines
from the current position in a file to a line matching the given regular
expression in quotes.
DefineClasses "class1:class2:..."
Activate the following colon, comma or dot-separated list of classes if and only if the file is edited.
DefineInGroup "class1:class2:..."
Activate the following colon, comma or dot-separated list of classes if the edit group is entered. This can be combined with other classes to identify what particular edits took place. Use DefineInGroup if you want to define a class or list of classes conditional on entry to a BeginGroup ... EngGroup block. For example,
editfiles:
{ /etc/inetd.conf
BeginGroupIfNoSuchLine "$(myservice1)"
Append "$(myservice1)"
DefineInGroup "myservice1_added"
EndGroup
BeginGroupIfNoSuchLine "$(myservice2)"
Append "$(myservice2)"
DefineInGroup "myservice2_added"
EndGroup
}
This will define service_added and service_added_another_way if either line is added, but additionally myservice1_added if myservice1 was added and likewise for myservice2_added.
Activate the following colon, comma or dot-separated list of classes
if execution reaches the BeginGroup ... EndGroup
section(s) containing this command. If you think you want to put
DefineClasses within a BeginGroup ... EndGroup section,
you actually want this.
DeleteLinesAfterThisMatching quoted-regex
Delete lines after the current position which match the quoted expression.
DeleteLinesContaining quoted-string
DeleteLinesNotContaining quoted-string
Delete all lines (not) containing the exact string quoted.
DeleteLinesMatching quoted-regex
DeleteLinesNotMatching quoted-regex
Delete all lines (not) fully matching the tied quoted regular expression.
DeleteLinesStarting quoted-string
DeleteLinesNotStarting quoted-string
Delete all lines (not) beginning with the exact string quoted.
DeleteLinesNotContainingFileItems filename
Delete lines in the file that do not contain the any of the substrings in the file.
DeleteLinesNotMatchingFileItems filename
Delete lines in the file that do not match the any of the regular expressions in the file.
DeleteLinesNotStartingFileItems filename
Delete lines in the file that do not start with any of the substrings in the file.
DeleteNLines quoted-string
Deletes up to N lines from the current file, starting from the location of the current line pointer. If the end of the file is reached and less than N lines are deleted, a warning is issued, but editing continues.
DeleteToLineMatching quoted-regex
Delete lines from the current position, up to but not including a line matching the regular expression in the quoted string. If no line matches the given expression, a warning is only printed in verbose mode, but all edits are immediately abandoned.
If set to binary, the file will be edited as if it were a non-ASCII file. See discussion below.
EditMode "Binary"
Editfiles treats lists as private interpretations, since iteration over
lists could lead to unpredictable behaviour if text variables accidentally
contain the list separator. The control option Split therefore has
no effect on editfiles. This definition makes list expansion work in editfiles.
EditSplit ","
Be careful not to confuse this with the SplitOn character.
editfiles:
{ /tmp/bla1
EditSplit "!"
AppendIfNoSuchLine "alpha1!beta1"
EditSplit ":"
AppendIfNoSuchLine "alpha2!beta2"
EditSplit "@"
AppendIfNoSuchLine "alpha3@beta3"
}
{ /tmp/bla2
AppendIfNoSuchLine "new1@new2"
}
Deletes all lines from the current file.
See DefineClasses
Terminates a begin-end conditional structure.
Terminates a loop. See ForEachLineIn
This causes cfengine to run through the contents of the file and expand any recognisable editfile strings in the file, if they are defined within the scope of the cfagent script. This gives cfengine an m4 like capacity.
ExpireAfter mins
Name a fiter for pruning file searches.
Filter filteralias
The quoted string which follows may be either ‘dos’ or ‘Unix’ to fix the end of line character conventions to match these systems. This command should be executed last of all, since cfengine appends new lines with the conventions of the system on which is was complied during edit operations.
ForEachLineIn quoted-filename
This marks the beginning of a for-loop which reads successive
lines from a named file. The result is like using SetLine
for each line in the file. Nested loops are not permitted.
Moves the file pointer to the last line in the current file.
Add a ‘#’ to the start of any line containing the quoted string.
HashCommentLinesContaining quoted-string
Add a ‘#’ to the start of any line exactly matching the quoted regular expression.
HashCommentLinesMatching quoted-regex
Add a ‘#’ to the start of any line starting with the quoted string.
HashCommentLinesStarting quoted-string
ExpireAfter mins
IncrementPointer quoted-number
Increments the value (in lines) of the file pointer by the number of lines specified in the quoted string (as a denary number). e.g. ‘``4''’. Negative values are equivalent to decrementing the pointer. If a request is made to increment/decrement outside of the file boundaries the pointer `bumps' into the boundary and remains there, i.e. either at start of file or end of file.
Inform quoted-string
Set to true or false, on or off to set the
inform level for this file. Default is off. Note that, owing to the
way that cfengine re-uses code, this feature does not work very
well. Detailed messages are not available, only a summary of whether
or not the file changed.
InsertFile quoted-string
Inserts the named file after the current line position in the file. This should be used in conjunction with a begin-end construction in order to avoid including the file every time cfengine is run. If the file does not exist, or cannot be opened, there is only a warning issued in verbose mode. Note if the file is empty, or if the current line pointer is not set, the file is inserted at the start of the file.
InsertFile quoted-string
Inserts the quoted string as a line after the current line pointer in the file. After the insert, the line pointer is incremented by one so that subsequent inserted lines are placed after the first. This should probably be used in conjunction with the conditional begin-end tests to avoid lines being inserted on every run.
LocateLineMatching quoted-regex
Moves the current line pointer to the line matching the
quoted regular expression. If there is no match, a
warning is only issued in verbose mode, but all
editing is immediately aborted. See also
WarnIfNoLineMatching so that you can get an
explicit warning, even out of verbose mode.
PercentCommentLinesContaining quoted-string
Add a ‘%’ to the start of any line containing the quoted string.
PercentCommentLinesMatching quoted-regex
Add a ‘%’ to the start of any line exactly matching the quoted regular.
PercentCommentLinesStarting quoted-string
Add a ‘%’ to the start of any line starting with the quoted string.
Prepend quoted-string
Add a line containing the quoted string to the start of the file.
This should be used in conjunction with the
decision structures BeginGroupIfNoLineMatching and
BreakIfLineMatches.
PrependIfNoLineMatching quoted-regex
A new version of the older PrependIfNoSuchLine
with uses a regular expression instead of a literal string.
The string prepended is the one set using SetLine.
PrependIfNoSuchLine quoted-string
Add a line containing the quoted string to the start of the file if the file doesn't contain the exact line already.
Recurse digit/inf
For recursive descents when editing whole file trees.
ReplaceLineWith quoted-string
Replace the line at the current position with the text in the quoted string. The file pointer remains pointing to this line after the change.
ReplaceAll quoted-regex With quoted-string
Replace all instances of strings matching the regular expression in the first quotes with the exact string in the second set of quotes, throughout the current file. Note that cfengine matches on a left to right basis, with the first match taking precedence, so if your regular expression matches text ambiguously it is the first occurrence which is replaced. For example, if you replace ‘cf.*’ with ‘CFENGINE’ and cfengine encounters a line ‘hello cfengine cfengine’, then this will be replaced with ‘hello CFENGINE’ even though two possible strings match the regular expression. On the other hand if the expression is not ambiguous, say replacing ‘cfengine’ with ‘CFENGINE’, then the result would be ‘hello CFENGINE CFENGINE’.
ReplaceFirst quoted-regex With quoted-string
For each line of the current file, replace the first string matching the regular expression in the first quotes (quoted-regex) with the string given in the second set of quotes (quoted-string). Matching is done left to right. For example, if you replace ‘``YY = [[:digit:]][[:digit:]]''’ with ‘``YY = 04''’ and cfengine encounters ‘``YY = 03 but old YY = 70''’ then it will be replaced with ‘``YY = 04 but old YY = 70''’
ReplaceLinesMatchingField quoted-number
This command replaces any lines in the current file with the current line
set by SetLine or ForEachLineIn, if the lines
are split into fields (e.g. the password file) separated by the
SplitOn character (':' by default), and the corresponding
fields match.
The idea behind this command was to be able to override global passwords (from a file which gets distributed) by new passwords in a local file. Rather than maintaining the files separately, this simply overrides the entries with the new ones.
Repository quoted string
This allows a local override of the Repository variable, on an item
by item basis. If set to “off” or “none” it cancels the value of a global repository.
See copybackup. See Backup in editfiles.
ResetSearch quoted-string
Sets the current-position pointer to the line number in the quoted string. ‘EOF’ indicates the end of the file.
RunScript quoted-string
Executes the named script command. Before executing the script any edits are saved to disk. After the script has executed, cfengine reloads the file for any further editing operations. The script (which may be any executable program) is appended with two arguments: the name of the file which is being edited and the system hard class (e.g. sun4, ultrix etc.) of the system executing the script.
CAUTION: cfengine knows nothing about the success or failure of anything that is done during the execution of user scripts. This feature is to be used at the users own peril!
RunScriptIfLineMatching quoted-string
Executes the script named with the SetScript
command only if the current file contains a line matching
the quoted regular expression.
CAUTION: cfengine knows nothing about the success or failure of anything that is done during the execution of user scripts. This feature is to be used at the users own peril!
RunScriptIfNoLineMatching quoted-regex
Executes the script named with the SetScript
command if the current file contains no line matching
the quoted regular expression.
CAUTION: cfengine knows nothing about the success or failure of anything that is done during the execution of user scripts. This feature is to be used at the users own peril!
SetCommentStart quoted-string
Specify which string should be used for starting
a comment using the commands CommentLineMatching
and CommentLineStarting. The default is the hash
symbol ‘#’ followed by a single space.
SetCommentEnd quoted-string
Specify which string should be used for ending
a comment using the commands CommentLineMatching
and CommentLineStarting. The default is the empty
string. For example, you could make C style comments
by setting CommentStart to ‘/*’ and comment
end to ‘*/’.
SetLine quoted-string
Sets a current line value which can be appended using
AppendIfNoLineMatching using a regular expression.
SetScript quoted-string
Sets the name of a user-supplied script for editing the current file.
SlashCommentLinesContaining quoted-string
Add a ‘//’ to the start of any line containing the quoted string.
SlashCommentLinesMatching quoted-regex
Add a ‘//’ to the start of any line exactly matching the quoted regular expression.
SlashCommentLinesStarting quoted-string
Add a ‘//’ to the start of any line starting with the quoted string.
SplitOn quoted-string
This defines a single character which is to be interpreted as a
field separator for editing files with columns. The default value
for this is ‘:’, as is used in the password and group files.
It is used in conjunction with ReplaceLinesMatchingField.
Note, be careful not to confuse this with the EditSplit character.
Set to true or false, on or off to set inform level for this file. Default is off.
Syslog quoted-string
quote mode
Set local umask for file creation and script execution.
UnCommentLinesContaining quoted-string
Uncomment all lines in file containing the quoted string as a substring. The comment delimiters are assumed to be those set using SetCommentStart and SetCommentEnd.
UnCommentLinesMatching quoted-regex
Uncomment all lines in file matching the quoted regular expression. The comment delimiters are assumed to be those set using SetCommentStart and SetCommentEnd.
UnCommentNLines quoted-string
Uncomments N lines starting from the current position, using
the currently defined method for commenting. Note that the
comment start and end symbols are removed independently, i.e.
they are not matched, so that a comment may be spread over
several lines. e.g. If using C style ‘/*’ and ‘*/’
comments, the command UnCommentNLines "3" would
uncomment
/* 1 */
/* 2 */
/* 3 */
and also
/* 1
2
3 */
UnCommentToLineMatching quoted-string
Uncomments from the current position up to and including the first line matching the named regular expression.
Switches off the feature AbortAtLineMatching.
UnsetAbort quoted-string
Normally cfengine uses a shell based exec function to run scripts during editing. This involves the inheritance of environment variables and path, which carries with it an inherent security risk. Setting this value to false causes execution to execute without an encapsulating shell.
If the file to be edited does not exist, a visible alert is issued.
WarnIfFileMissing quoted-string
Issue a warning if the quoted string is found as a substring of one or more lines in the file.
WarnIfLineContaining quoted-string
WarnIfLineMatching quoted-regex
Issue a warning if the quoted regular expression matches one or more lines in the file.
WarnIfLineStarting quoted-string
Issue a warning if the quoted string matches the start of one or more lines in the file.
WarnIfNoLineContaining quoted-string
Issue a warning if the quoted string is not contained in one or more lines in the file.
WarnIfNoLineMatching reg-ex
Issue a warning if the quoted regular expression does not match one or more lines in the file.
WarnIfNoLineStarting quoted-string
Issue a warning if the quoted string is not found at the start of one or more lines in the file.
WarnIfNoSuchLine quoted-regex
Issue a warning if the quoted regular expression does not match one or more lines in the file.
A limited number of operations can also be performed on purely binary
files, e.g. compiled programs, in order to search for strings or
viral code, or to modify strings within a program. Binary mode is a
mutually exclusive, separate mode to normal editing. The limit on the
size of binary files is set by editbinaryfilesize in
control.
Replaces occurrences of the matched regular expression with\
the provided literal text, only if the length of the literal substitute
is less than or equal to the length of the located string. If the
replacement string is shorter, it is padded with ascii spaces (character 32) by default.
The padding character can be changed by setting BinaryPaddingChar in control.
Padding with a null byte would lead to corruption of text within a program.
The files facility allows you to touch (create), check for the
existence, owner and permissions of files, change the permissions and
test for setuid root programs.
A files-statement can have several options. We can begin by examining the form of the statement in pseudo-code:
files:
classes::
/file-object
mode=mode
owner=uid-list
group=gid-list
action=fixall/other-options/warnall
links=false/stop/traverse/follow/tidy
rxdirs=true/on/false/off
ignore=pattern
include=pattern
exclude=pattern
filter=filter alias
xdev=true/on/false/off
define=classlist
elsedefine=classlist
checksum=md5/sha/best
syslog=true/on/false/off
inform=true/on/false/off
audit=true/on/false/off
ifelapsed=mins
expireafter=mins
Special OS flags:
flags=BSD flags
|
An example would be the following:
any::
/var/spool/printQ mode=0775 r=0 o=daemon g=daemon act=fixdirs
The meaning of these item is sketched out below and becomes clearer on looking at a number of examples. Note that, each of the options below can be written in either upper or lower case and abbreviated by any unique abbreviation.
home may also be used. See home directive.
A file object is interpreted as a directory if you write it in the
following form: /directory-path/.. i.e. a trailing dot signifies
a directory. This then becomes the same as the directory command.
mode=modestringaction
option determines what will be done about it. The modestring should
consist of either a three digit octal numbers with ‘+’, ‘-’ or
‘=’ symbols, or a text string like that used by the command
chmod. For instance: mode=u=rwx,og+rx would mean set the
read/write and execute flags for the user (file owner) and add the
read/execute flags for others and group bits. An example of the
numerical form might be -002 which would mean that the
read-for-others flag should either not be set or should be unset,
depending on the action you choose. +2000 would mean that the
setgid flag should be present or set, depending on the action.
+2000,-002 would be a combination of these. The ‘=’ sign
sets to an absolute value, so =755 would set the file mode to
mode 755.
flags=BSD flagschflags documentation for this. For
example,
/tmp/flags.01 mode=0600 owner=0 group=0
flags=uappnd,uchg,uunlnk,nodump,opaque,sappnd,schg,sunlnk
action=touch
recurse=number/infinf then cfengine opens all subdirectories and files beginning
from the specified filename.See Recursion.
owner=owner listroot,2,3,sysadm. In cases where you ask
cfengine to fix the ownership automatically, the owner will be set to
the first recogized owner in the list if and only if it is not one of the named
uids in the list.
group=group listwheel,2,3,sysadm. In cases where you ask
cfengine to fix the ownership automatically, the group will be set to
the first recognized group in the list if and only if it is not one of the named
gids in the list.
action=action warnall warndirs warnplain
fixall fixdirs fixplain
touch linkchildren create compress alert
The upper line results only in warnings being issued. The actions
beginning `fix' prompt cfengine to fix encountered problems without
bothering the user. No message is issued unless in verbose mode. The
special features on the third line will be explained separately. Alert
is like -print in the find command, it triggers on the existence
of files which have not been ignored, excluded or filtered. This should
normally be used together filter, in order to locate files of particular types.
include=wildcard/patternexclude=wildcard/patterninclude= list.
ignorelinks=stop/traverse/tidy-l command line option) you may give this option the value
true, or traverse, or follow. To specify no
recursion you set the value false or stop.
Note that the value set here in the cfengine program always
overrides the value set by the -l command line option, so you
can protect certain actions from this command line option by specifying
a negative value here. If you specify no value here, the behaviour is
determined by what you specify on the command line.
The value links=tidy has the same effect as the ‘-L’ command
line option except that here it may be specified per item rather than
globally. Setting this value causes links which point to non-existent
files to be deleted.
If the warn directive is used (for directories, plain files or both)
then only a warning message is issued if the file being tested does not
match the specification given. If the fix directives are used then
cfengine does not issue a warning, it simply fixes the value silently.
Non-existent files are created by the touch command. A
directory may be touched (created) by writing the filename
/a/b/c/. with a dot as the last character. (This may also be
achieved with the directories directive, See directories.)
define=classlistchecksum=md5/sha/bestbest is used for this option then the best known pair of
checksum methods are cross-checked for each file. (The best value are
determined by the algorithms supported in the OpenSSL interfaces used
to compile the program).
If ChecksumUpdates is set, then
security warning messages are issued only once and the value
in the database is then changed to the new value of the file
automatically i.e. the behaviour is similar to that of setuid root
program detection, See ChecksumPurge.
Also, See ChecksumUpdates.
xdevrxdirsmode=644 recurse=true
could lead to unintended permissions on directories.
The default values are mode=+000, recurse=0,
action=warnall and any owner or group is acceptable. The default
for links is to not traverse links unless the -l option is
set on the command line.
The recursion specifier tells cfengine what to do, starting from
/directory name. A value of r=0 means `no recursion' and
any checking is limited only to the named file or directory. A value of
r=inf implies unlimited recursion. Cfengine then descends into
all subdirectories checking or setting the permissions of files until it
`bottoms out' at a plain file. A value such as R=4 means descend
recursively into subdirectories, but no more than four levels. This is
a useful safety net in preventing unforeseen accidents. A recursive
search also bottoms out on device boundaries and symbolic links
(provided the -l option is not used).
When you specify the permissions for a whole file tree, using the recursion specifier it is awkward to have to remember that directories must be executable. cfengine will do this for you automatically. If you specify that a file tree is to have a read flag set, cfengine will ensure that the corresponding execute flag is also set for directories which live in the tree. So the command
files:
myclass::
/dir mode=a+rw r=inf fixall
would set all plain files to mode 644 and all directories to 755, that is read/write for everyone on plain files and read/write/execute for everyone on directories.
Integrity checks are a good way of detecting tampering
with a system, or simply for monitoring upgrades that happen
as a result of software unrelated to cfengine. The checksum
option asks cfengine to compute and cache the value of the
cryptographic checksum of the named file.
files:
/my/file
checksum=best
action=warnall
The checksum type can be md5, sha or best.
The option best cross checks the best two available algorithms.
At present cfengine is waiting for improvements to the OpenSSL
library supporting sha2 algorithms.
Once a value has been computed and placed in the database each new computation will be checked against the old one. Any change will lead to a mismatch and the following will happen:
checksum_alerts will be defined, indicating
that a change has occurred. This can be used to trigger followup actions. The class
is a persistant class that lasts for 60 minutes.
home directive
If you want to check the files of all the users who have their login
areas on the current host, you can use a wildcard directive home
instead of a directory name. In this case the file action iterates over
all home directories physically on the current host. The home
directories are, of course, located by searching for files which match
$(mountpattern)/$(homepattern)
i.e. the values which are specified in the control part of the
program. For example the following line is a very useful service to
ignorant users.
files:
any::
home mode=o-w r=inf act=fixall
It ensures automatically that no user has files which can be written to by other arbitrary users.
As a corollary to this, you may write something like
any::
home/www mode=a+r fixall
to specify a special subdirectory of every users' home directory. This statement would check that all of the files in users' world wide web directories were readable for everyone.
If you do not want to explicitly state the owner or group of a file you may simply omit the group or owner options.
/file-object m=0664 r=inf
This example generate a warning if any files under the named directory do not have permission read/write for all users.
The linkchildren facility is almost identical to that already
described under links. See Link Children. The only
difference here is that the ownership and permissions on the links are
set all in one operation. For example:
myclass::
/local/lib/emacs m=0770 o=me g=mygroup act=linkchildren
The touch facility creates a new file with the
specified permissions and ownership, or corrects the
permissions and ownership of an existing file, in addition
to updating the time stamps.
myclass::
/newfile mode=0644 action=touch
This is like touch except that an existing
file's time stamps, permissions and ownership will not be modified
if the file already exists. If the file does not exist, the
attributes are set to the values specified, or to the default
values of 0644.
A filter is a way of selecting or pruning during a search over files or processes. Since filter rules could apply to several objects, cfengine allows you to define filter conditions as separate objects to be applied in different contexts.
Filter objects can be used in copy, editfiles,
files, tidy and processes. In most cases one
writes
.. filter=<i>filteralias</i>
in the appropriate command. The exception is editfiles, where the syntax
is
{
..
Filter "filteralias"
..
}
Example:
files:
/tmp filter=testfilteralias action=alert r=inf
Filters are defined in a separate section. Filters for files and processes are defined together. They differ only in the criteria they contain. Here is are examples of file filters:
Filters:
{ filteralias1
Owner: "mark|cell|motd"
Group: "ecg|mark"
Mode: "700"
FromCtime: "date(2000,1,1,0,0,0)" # absolute date
ToCtime: "now"
FromMtime: "tminus(1,0,0,2,30,0)" # relative "ago" from now
ToMtime: "inf" # end of time
FromAtime: "date(1997,2,22,0,0,0)"
ToAtime: "inf"
FromSize: "10000" # File size interval
ToSize: "10mb"
ExecRegex: "/usr/bin/file $(this) (.*ascii.*)"# Result from "files" command
Type: "dir|link" # reg|link|dir|socket|fifo|door|char|block
NameRegex: ".*.asc" # regex matching file name
IsSymLinkTo: "/dev/null" # True if file is a link to object name regex
Result: "Type" # Result which shouldbe returned
}
#########################################
{ testfilteralias2
ExecProgram: "/bin/ls $(this)" # True if the program returns true. $(this) is the current object
}
#########################################
{ testfilteralias3
Owner: "mark"
}
Filters are evaluated like classes. In fact, the filtering works by evaluating the class attributes for each file.
File filters:
Owner:``none'' for users or groups which are undefined in
the system passwd/group file.
mode= strings in the files command. This test returns
true if the bits which are specified as `should be set' are indeed
set, and those which are specified as `should not be set' are not set.
Atime:,Ctime:,Mtime:(year,month,day,hour,minutes,seconds)
This may be evaluated as two functions: date() or tminus() which give absolute times and times relative to the current time respectively. In addition, the words now and inf may be used. e.g.
FromCtime: "date(2000,1,1,0,0,0)" # absolute date
ToCtime: "now"
FromMtime: "tminus(1,0,0,2,30,0)" # relative "ago" from now
ToMtime: "inf" # end of time
Type:file|reg|link|dir|socket|fifo|door|char|block
Note that file and reg are synonymous.
ExecRegex:NameRegex:IsSymLinkTo:ExecProgram:Result:Process filters:
OwnerPID:PPID:PGID:RSize:VSize:Status:Command:(From/To)TTime:(From/To)STime:TTY:Priority:Threads:Result: { filteralias
FromSTime: "date(2000,11,18,0,0,0)"
ToSTime: "now"
}
All processes which have accumulated between 1 and 20 hours of CPU time.
{ filteralias
FromTTime: "accumulated(0,0,0,1,0,0)"
ToTTime: "accumulated(0,0,0,20,0,0)"
}
Here is an example filter to search for all files which are either directories or links, or any kind of file owned by mark, in group cfengine.
control:
actionsequence = ( files )
files:
/tmp filter=testfilteralias action=alert r=inf
/cfengine filter=testfilteralias action=fixall r=inf mode=644
filters:
{ testfilteralias
Owner: "mark"
Group: "cfengine"
Type: "dir|link"
Result: "Type|(Owner.Group)" # Both owner AND group required correct
}
Find all ELF executables using data from the Unix file command.
Caution, this takes a long time if used indescriminately.
control:
actionsequence = ( files )
files:
/tmp filter=testfilteralias action=alert r=inf
/cfengine filter=testfilteralias action=fixall r=inf mode=644
filters:
{ testfilteralias
ExecRegex: "/bin/file (.*ELF.*)"
Result: "ExecRegex"
}
Here is an example which warns of any process coupled to a terminal started in November:
control:
actionsequence = ( processes )
filters:
{ filteralias
FromSTime: "date(2000,11,0,0,0,0)"
ToSTime: "date(2000,11,30,0,0,0)"
TTY: ".*pt.*"
Result: "TTY.STime"
}
processes:
"." filter=filteralias action=warn
The groups action (equivalently referred to as classes as
of version 1.4.0) is used to define classes which stand for groups of
hosts. If you use the NIS (network information service) facility for
defining netgroups then this idea will already be familiar to you
and you can probably use your already-defined netgroups in cfengine.
To define a group, you simply make a list and assign it a name. Here is
an example of the syntax:
groups:
ANDed_class::
science = ( saga tor odin )
packages = ( saga )
AllHomeServers = ( saga )
AllBinaryServers = ( saga )
OIH_servers = ( saga )
OIH_clients = ( tor odin )
notthis = ( !this )
ip_in_range = ( IPRange(129.0.0.1-15) ) # host is in ip address range
ip_in_range = ( IPRange(129.0.0.1/24) ) # host is in ip address range (CIDR notation)
compute_nodes = ( HostRange(cpu-,1-32) ) # host name in the cpu-01 through cpu-32 range
To include a list of hosts from a NIS netgroup, you use the ‘+’ symbol, or the ‘+@’ construction. For example:
groups:
science = ( +science-allhosts )
physics = ( +physics-allhosts )
physics_theory = ( +@physics-theory-sun4 dirac feynman schwinger )
Using an enormous netgroup does not use up any space. A group
declaration results in the storage of only the class name regardless of
how many hosts are in the list. The rule is that the left hand side of
the assignment becomes defined (true) if the list on the right hand side
includes the host which is parsing the file — i.e. $(host).
In some cases your netgroups will not correspond exactly to the list you want, but it might be more convenient to use a netgroup except for certain hosts. You can `undefine' or remove hosts from the netgroup list by using the minus `-' symbol. For example:
group = ( +mynetgroup -specialhost -otherhost )
which means, of course, all hosts in netgroup mynetgroup except
for specialhost and otherhost. Finally, you may also
subtract two netgroups in the following manner.
group = ( +bignetgroup -smallnetgroup )
The `minus' command effectively eliminates its members from
bignetgroup if they exist within that group. If none of the
hosts in smallnetgroup exist in bignetgroup then the
command has no effect.
Groups may contain previously defined cfengine groups too. This allows one class to inherit the attributes of another class, for instance:
AllSun4Hosts = ( sonny sunny solar stella )
AllUltrixHosts = ( ully olly wally golly )
AllBSD = ( AllSun4Hosts AllUltrixHosts )
The classes on the right hand side are effectively ORed together into the left hand side. This enables complex classes to be constructed from several other basic classes, e.g.
SpecialTimes = ( Hr00 Monday Day1 )
which evaluates to true every day when it between 00:00 hours and 00:59, all day Monday and all day on the first day of every month.
If you apply a class predicate before a definition then the result is effectively the AND of the classes:
Hr00::
SpecialTime = ( Monday Tuesday )
defines SpecialTime at Hr00 on Monday or Tuesday.
Finally, you can define groups (strictly classes) by the result of a shell
command. A shell command or program is deemed to be `true' if it
exits with a status of zero, i.e. it calls exit(0). Any other
value is taken to be false. You can include shell commands as the members
of groups in order to define classes based on the outcomes of your
own scripts by enclosing the script in single or double quotes:
have_cc = ( '/bin/test -f /usr/ucb/cc' )
The class have_cc will then be defined if the shell command returns
true. Of course, you can put any script or program in the single quotes as
long as they adhere to the convention that zero exit status means true.
If you have several members which are shell commands, then the effect is
to make the class the logical OR of the scripts' results.
The homeservers declaration need only be used if you are using
cfengine's model for mounting NFS filesystems. This declaration informs
hosts of which other hosts on the network possess filesystems containing
home directories (login areas) which client hosts should mount.
A sample homeserver declaration looks like this:
homeservers:
Physics:: einstein
Math:: riemann euler
The meaning of this declaration is the following. Any host which finds
itself to be a member of the classes on the left hand side of the
assignment need to mount all home directory resources from the hosts on
the right hand side of the assignment. The pattern variable
homepattern is used to determine which resources are home
directories in the list of mountables. See mountables.
Let us consider an example in which homepattern is set to the
wildcard value ‘home?’ and the mountables list is given by
mountables:
einstein:/mysite/einstein/home1
einstein:/mysite/einstein/home2 mountoptions=soft,bg,intr,rsize=8192,wsize=8192
riemann:/mysite/riemann/local readonly=true
euler:/mysite/euler/home1
Any host in the group Physics would now want to mount all home
directories from the host einstein. There are two of these.
Both the filesystems listed for einstein match the
homepattern variable since they end in ‘home?’. cfengine
would therefore take this to mean that all hosts in Physics
should mount both of these filesystems.
Hosts in Math, on the other hand, should mount only
homedirectories from the hosts riemann and euler. There
is only a single filesystem on riemann and it does not match
homepattern, so it is not mounted. On euler there is a
match, so this filesystem will be added to the appropriate hosts.
Cfengine picks out home directory resources from the
mountables list by trying to match the homepattern
variable, starting from the end of the directory name. You do not
therefore have to use the designation /site/host/home? but this
is a simple choice and is highly recommended.
When you specify a recursive search as part of a files,
tidy or copy action, you would sometimes like to exclude
certain directories from the list of sub directories. In most cases you
will want to do this on a per-command basis (see the pages for these
actions separately), but you can also make a global ignore list. This
can be accomplished by adding the directory to the ignore-list. The syntax
is
ignore:
wildcards/directories/filenames
|
ignore:
any::
#
# Prevent tidying .X11 directories in /tmp where
# window managers write semaphores
#
.X11
#
# Don't tidy emacs locks
#
!*
/local/lib/gnu/emacs/lock/
/local/tmp
/local/bin/top
/local/lib/tex/fonts
/local/etc
/local/www
/local/mutils/etc/finger.log
None of the above directories will be checked or entered during recursive descents unless a specific command is initiated to search those directories with their names as the top of the search tree. A handy tip if you are tidying /tmp recursively is to include the directory .X11 here. This directory is used by the X-windows system and deleting it while a window manager has an open session can cause the user some trouble.
Ignore refers to all recursive searches in tidy, files, copy and links.
To break up a large configuration file into smaller files you can use the include directive. This conditionally reads in files if the class on the left hand side of the assignment matches the host parsing the file. This enables also a variety of cfengine configuration scripts to read in a standard set of default settings. The syntax of the statement is:
import:
any::
cf.global_classes
linux::
cf.linux_classes
Note that, if you define variables in an imported file they will not be defined for operations in their parent files. This because cfengine reads in all the import files after the main file has been parsed—not at the place where you call import in your script. This means that variables or macros defined in imported files are only defined after the main program. Variables from earlier files are inherited by later includes, but not vice-versa.
interfaces:
classes::
interfacename netmask=netmask broadcast=broadcast
|
If you have more than one network interface, or you do not wish to use the
default interface name, this section may be used to define further
interfaces to be checked. This feature can replace the older method
of setting netmask and broadcast address in control:. If the netmask
variable is not set, cfengine ignores the default interface configuration.
Example:
interfaces:
"le1" netmask=255.255.255.0 broadcast=ones
"le2" netmask=255.255.255.0 broadcast=ones
The symbolic links function is one of the greatest plusses in cfengine
as a system administration tool. It allows you to do two things: check
single links for correctness and consistency (or make them if they do
not exist), and check or make links to every file in a designated
directory. This latter feature is called multiple linking or linking
children. The linkchildren feature is also available from the
files action See files. The syntax of a link item is:
from-link ->[!] to-object
or
from-link +>[!] to-object
type=symbolic/absolute/abs/hard/relative/rel
copy=pattern
recurse=number/inf/0
copytype=checksum/ctime
include=pattern
exclude=pattern
ignore=pattern
action=silent
deadlinks=kill/force
define=classlist
nofile=kill/force
syslog=true/on/false/off
inform=true/on/false/off
audit=true/on/false/off
ifelapsed=mins
expireafter=mins
|
The special variable $(binserver) can be used in links.
To define a single link, you create an entry of the following form:
links:
class::
linkname -> object_to_link_to
linkname -> ./relative_link
linkname -> ../relative_link
If links exists and point to their intended destinations then no
action is taken. If a link exists but points incorrectly then a
warning is issued, unless the pling operator ‘!’ is given, in
which case the correct value is forced.
If the link exists and points to a file which does
not exist a warning is issued unless the command line option -L
is used, in which case the link is deleted.
Here is an example of some valid link statements.
links:
Physics.sun4::
/usr/local -> /$(site)/$(host)/local
/home -> /$(site)/$(host)/u1
/etc/sendmail.cf -> /usr/local/mail/etc/global-sendmail.cf
/usr/lib/sendmail ->! /local/lib/sendmail
cfengine makes any directories which are required leading up to the link
name on the left hand side of the arrow automatically. In the last
example the `pling' forces cfengine to make the link even if a file for
link exists previously. Plain files are saved by appending
.cfsaved to the filename, or by moving to a repository, whereas
old links are removed. The same effect can be enforced globally using
the -E option, but only if the program is run interactively. (In
this case a prompt is issued to make sure that you wish to use such a
big hammer on your system!)
The link operation accepts a number of parameters
type=hard/relative/absoluterelative
is selected, and the `to' object is an absolute path name,
the link name will be rewritten as a pathname relative
to the source file, using ‘.’ and ‘..’ to move relative
to the current directory. For instance, a link from /usr/local/file
to /usr/file would be linked as ./../file.
If the `to' object is already relative,
this has no effect.
If absolute is specified, cfengine
will try to resolve the true path location of the `to' object,
expanding any symbolic links or dots in the path name, up to
a maximum of four levels of symbolic links.
copy=patterncopytype=checksum/ctimenofile=kill/forceexclude=patternignorerecurse=number/infinf means infinite recursion. Cfengine also ignores
files and directories in the ignore list See ignore.
define=classlistThe final feature of the links facility is connected to the use of the
cfengine model for mounting NFS filesystems. In particular it concerns
the variable $(binserver). The easiest way to understand this
feature is to illustrate a couple of examples. Consider the following:
links:
any::
/local -> /${site}/${binserver}/local
The result of this command is quite different depending on which host is
executing it. The variable $(site) clearly has a fixed value,
but the variable $(binserver) might expand to any valid binary
server for the host executing the program. See binservers. The
procedure cfengine adopts is to go through its list of mountables,
keeping only those mountable resources which belong to defined binary
servers for the current host. It then attempts to match a filesystem by
substituting $(binserver) with each of its valid binservers in
turn and it matches the first one binary server which yields an existing
file.
Note that every host is a binary server for itself, so that the value of
$(binserver) which has absolute priority is alway the same as the
value of $(host). This ensures that the link will always be made
to a local filesystem if the rules of the model are upheld.
With the link symbol +>, you opt to link all of the files in a
directory to corresponding files in another directory. This procedure is
sometimes useful for installing software. In the example
links:
myclass::
/usr/local/bin +> /usr/local/lib/perl/bin
/opt +>! /local
every file in the directory /usr/local/lib/perl/bin is linked
symbolically to a corresponding file in /usr/local/bin. The
`pling' character forces cfengine to replace old links or plain files
already existing. Old links are removed, whereas old files are saved
by appending .cfsaved to the filename See repository.
Each time cfengine runs it goes through all of the files in the
directory concerned and checks the appropriate link accordingly. If new
files appear, new links will be added. If a file disappears but the
link to it remains, a warning will be issued, unless the -L
command line option is used, in which case the link is deleted.
The linkchildren directive is a closely related to the cfengine model for NFS filesystems. It is a way of making links which embodies a rudimentary kind of `intelligence'.
links:
any::
/usr/local/lib/emacs +> linkchildren
The word linkchildren automatically tells cfengine that it should
look for an appropriate file to link to on a binary server for the
current host. The exact meaning of the above statement is as follows.
cfengine begins searching though the list of mountable resources,
discarding any filesystems which do not belong to valid binary servers.
It looks for a filesystem ending in `emacs' (the last link of the left
hand side). If all is well, these file systems are already mounted and
they can be searched. If no resource is found ending in `emacs', we go
to the next link lib and look for a filesystem ending in `lib'.
If this is not found we go to local and so on. When a match is
made, cfengine then tries to locate the file by checking whether it
exists relative to the matched filesystem. For example, suppose `local'
matched with host:/site/host/local. It would then try to locate
host:/site/host/local/lib/emacs and link all of the children
therein to the local file directory /usr/local/lib/emacs.
Here is another example which makes reference to the cfengine model for
mounting NFS filesystems. Suppose you have a host with some spare disk
space. You want to mount /usr/local from the binary architecture
server, but you also want to use the disk you have locally. The
following lines
links:
electron::
/$(site)/electron/local +> linkchildren
any::
/usr/local -> /$(site)/$(binserver)/local
have the effect of creating a directory /$(site)/electron/local
and filling it with links to all of the files and directories on the
binary server's mounted filesystem. It results in an exact copy (by
linkage) on the local disk, but does not use up your local disk space.
The space you have remaining could, for example, be used for software
with a special license for that host. The second link links
/usr/local to the `nearest' binary server. But the nearest
binary server is always $(host) which means this evaluates to a
file which now exists because of the first command, so on the host
`electron' the directory /usr/local ends up being a link to
/$(site)/electron/local which is full of links to the binary
server.
If you've caught your breath after that mouthful you probably have mixed feelings about creating a bunch of links in this way. What happens if the files they point to are removed? Then you are left with a lot of useless links. Actually this is no problem for cfengine, since you can ask cfengine to simply remove links which point to non-existent files See files. Nevertheless, this feature clearly requires some caution and is mainly a spice for advanced users of the cfengine model.
When specifying symbolic linking, you can ask cfengine to change the link type to be either relative to the source or to be an absolute path. What this means is the following. Consider the following link:
/var/tmp/cfengine -> /local/cfengine
If we add the option type=relative, then instead
of creating a link which points to /local/cfengine,
the link is created pointing to the location
./../../local/cfengine
In other words, the link is relative to the calling directory /var/tmp.
If a link is specified as being absolute with the option
type=absolute, then cfengine attempts to resolve
to value of the link so as to be the true path of the
target. If the target name contains a symbolic link, then
this is expanded as far as possible to give the true
path to the file. For example, if /local is
really a link to /site/myhost/local then the link
would point to /site/myhost/local/cfengine.
Cfengine will also allow you to create hard links to regular files. A
hard link is in every way identical to the original file, it merely has
a different name (technically, it is a duplicate inode). To create a
hard link you use the link-option type=hard. For example:
links:
/directory/newname -> /directory/othername type=hard
Cfengine will not create hard links to directories or other special files. This is always a slightly dubious practice and is best avoided anyway. POSIX says that the hard link can be on a different device to the file it points to, but both BSD and System V restrict hard links to be on the same device as their predecessors. Cfengine has no policy on this, but—in the theoretical case in which the hard link and the predecessor were on different file systems—it becomes near impossible to determine with certainly between a hard link and a very similar regular file, and thus cfengine issues a warning in verbose mode about this eventuality. Provided both link and predecessor are on the same filesystem cfengine determines the status of hard links by comparing the device and inode numbers of the file pointed to.
The mailserver declaration need only be used if you are using
cfengine's model for mounting NFS filesystems. This declaration informs
hosts of which NFS filesystem contains mail for its users. All hosts
apart from the mail-host itself must then mount the mail spool directory
across the network. The declaration looks like this:
mailserver:
class:: mailhost:/var/spool/mail
The result of the mailcheck command in the action-sequence is now
to mount the filesystem /var/spool/mail on the host
mailhost. This action is carried out on any machine which does
not already have that filesystem mounted.
The mail spool directory is mounted, by default, onto the official mail
spool directory for the system which is parsing the program. In other
words, on an HPUX system, the spool directory is mounted on
/usr/mail by default, whereas on a Sun system it would be mounted
on /var/spool/mail. The default location can be changed by using
the resource file. See cfrc resource file.
From version 2.1.0, cfagent provides for the execution of closed functions or "methods". Methods are similar to the old idea of modules, but they are implemented in a way that allows collaboration between different hosts within a network, using a common standard. Methods must be cfengine programs however, wheras the module interface can be written in any script language.
Methods are designed to offer a firewall-like proxy interface for remote method execution. We can call methods a form of `voluntary RPC', in which hosts execute methods for one another on a purely voluntary basis. This builds in anti-spamming protection. The principle used is that hosts should be immune to Denial of Service attacks; they should only be able to disadvanatge themselves with the attempt.
(Remote method execution was not implemented until version 2.1.3. It is still considered experimental and should be tested carefully for production environments with at least version 2.2.2. List expansion is particularly fragile in cfengine 2. This problem cannot be resolved in version 2, so this should not be reported as a bug. )
Methods allow you to call an independent cfengine program, pass it arguments and classes, and collect the results for use in your main program. It thus introduces parent-child semantics into cfengine "imports". A method is more than an import. (Import is analagous to a C #include, while a method is like a C function.) Communication is peer to peer, by mutual consent. There is no "method server" that executes methods on remote hosts. Hosts exchange information by invitation only. This is an unreliable service (in the sense of UDP).
The order of method exeuction is not guaranteed. This results from the decoupling between client request and service provision.
methods:
class::
function_name(parameters or none)
action=filename
sendclasses=comma separated class list
returnvars=comma separated variable list or void
returnclasses=comma separated class list
server=ip-host/localhost/none
forcereplyto=ip address
owner=setuid
group=setgid
chdir=cd for child
chroot=sandbox directory
|
actionforcereplytoreturnvarsreturnclassessendclassesIf the server is set to localhost, the method will be
evaluated on the local machine. If the server is set of none,
the method will not be executed at all.
The function arguments may not be empty, but a null value can be
transmitted with a dummy value, e.g. Function(null) or
function(void). Here is an example method call.
# cfagent.conf
control:
actionsequence = ( methods )
#################################################
methods:
any::
SimpleMethod(null)
action=cf.simple
returnvars=null
returnclasses=null
server=localhost
With method file (located in the ModulesDirectory),
# cf.simple
control:
MethodName = ( SimpleMethod )
MethodParameters = ( null )
actionsequence = ( timezone )
classes:
dummy = ( any )
####################################################
alerts:
dummy::
"This simple method does nothing"
ReturnVariables(void)
ReturnClasses(void)
On executing this example, the output is:
nexus$ ./cfagent -f ./cftest
cfengine:myhost:SimpleMethod: cfengine:nexus: This simple method does nothing
If the server name is a wildcard, e.g. * then this acts as a multicast or broadcast.
The following example collects the tar file, unpacks it, configures and compiles it, then tidies its files.
####################################################
#
# This is a cfengine file that calls a method.
# It should be in the usual place for cfinputs
#
####################################################
control:
actionsequence = ( methods )
#####################################################
methods:
InstallTar(cfengine-2.1.0b7,/local/gnu)
action=cf.install
returnvars=null
returnclasses=null
server=localhost
We must install the method in the trusted modules directory (normally /var/cfengine/modules or WORKDIR/modules).
####################################################
#
# This is an example method file, that needs to be
# in the module directory /var/cfengine/modules
# since this is the trusted directory
#
# e.g. InstallFromTar(cfengine-2.1.0,/usr/local/gnu)
#
####################################################
control:
MethodName = ( InstallTar )
MethodParameters = ( filename gnuprefix )
path = ( /usr/local/gnu/bin )
TrustedWorkDir = ( /tmp )
TrustedSources = ( /iu/nexus/ud/mark/tmp )
TrustedSourceServer = ( localhost )
actionsequence = ( copy editfiles shellcommands tidy )
####################################################
classes:
Force = ( any )
####################################################
copy:
$(TrustedSources)/$(filename).tar.gz
dest=$(TrustedWorkDir)/$(filename).tar.gz
server=$(TrustedSourceServer)
####################################################
shellcommands:
"$(path)/tar zxf $(filename).tar.gz"
chdir=$(TrustedWorkDir)
"$(TrustedWorkDir)/$(filename)/configure --prefix=$(gnuprefix)"
chdir=$(TrustedWorkDir)/$(filename)
define=okay
okay::
"$(path)/make"
chdir=$(TrustedWorkDir)/$(filename)
####################################################
tidy:
$(TrustedWorkDir) pattern=$(filename) r=inf rmdirs=true age=0
####################################################
#editfiles:
#
#{ $(TrustedWorkDir)/$(filename)/configure-opts
#
#AppendIfNoSuchLine "Something ???"
#}
####################################################
alerts:
Force::
ReturnVariables(none)
ReturnClasses(success)
A more complex example is given below:
GetAnalysis("${parent1}",param2,ReadFile("/etc/passwd",300))
# The name of the method that is in modulesdir
action=cf.methodtest
# The variables that we get back should be called these names
# with method name prefix
returnvars=a,b,c,d
# This is an access list for returned classes. Classes will
# only be handed back if they are included here
returnclasses=define1,define2,class1
# The host(s) that should execute the method
server=localhost
# Only localhost can decide these - not a remote caller
# owner=25
# group=root
# chdir=/var/cfengine
# chroot=/tmp
Here the function being called is the cfengine program cf.methodtest. It is passed three arguments: the contents of variable parent1, the literal string "param2" and the first 300 bytes of the file /etc/passwd. On return, if the method gets executed, the values will be placed in the four variables:
$(GetAnalysis.a) $(GetAnalysis.b) $(GetAnalysis.c) $(GetAnalysis.d)
If the classes define1 etc, are returned by the method, then we
set them also in the main program as
GetAnalysis_define::
In other words, the class name is also prefixed with the method name to distinguish it.
(returnclasses works like an access
control list for setting classes, deciding whether or not the main
script should accept the results from the child method.). The remaining options are as those
for executing shell commands, and apply only on the host that executes
the function.
Both the client and server hosts must have a copy of the same method
declaration. The client should have a non-empty server= declaration.
The server side should have no server= declaration unless it is sending
the request on recursively to other hosts.
At present only requests to localhost are allowed, so only there is automatic
access to the rule.
The cfagent file that contains the method code must have the following declarations:
|
control:
MethodName = ( identifier ) MethodParameters = ( spaced list of recipient variables or files ) # .... alerts: # Return variables are alerts to parent ReturnVariables(comma separated list of variables or functions or void) ReturnClasses(comma separated list of classes) |
control:
MethodName = ( GetAnalysis )
MethodParameters = ( value1 value2 /tmp/file1 )
# ....
alerts:
# Return variables are alerts to parent
ReturnVariables("${var1}","${var2}","var3",literal_value)
ReturnClasses(class1,class2)
The parameters transmitted by the parent are read into the formal
parameters value1, value2 and the the file excerpt is
placed in the temporary file /tmp/file1.
The return classes are passed in their current state to the parent; i.e. if class1 is defined then it is offered to the parent, but if it is not defined in the method, it is not passed on. The parent can then choose to accept or ignore the value.
Methods can also be scheduled for execution on remote hosts.
Remote method execution is the same as local method execution except for
some additional requirements. A list of collaborating peers must be added
to the control section of update.conf.
In order the the requests to be collected automatically, you must have copy
in the action sequence of the update.conf file.
control:
MethodPeers = ( hostname list ) # Must have copy in actionsequence
This list tells the agent which remote hosts to collaborate with, i.e.
whom should we contact to look for work that we have promised to perform?
In order the the requests to be collected automatically, you must have copy
in the action sequence of the update.conf file.
For example, to make two hosts collaborate:
methods:
host1|host2::
MethodTest("my test!")
action=cf.methodtest
server=host2.iu.hio.no
returnclasses=null
returnvars=retval
ifelapsed=120
Note that an important aspect of remote method invocation is that there is only voluntary cooperation between the parties. A reply bundle from a finished method can collected from a server by the client many times, causing the classes and variables associated with it to be defined at regular intervals, controlled by the ifelapsed time. To avoid multiple actions, you should lock methods or their follow-up actions with long ifelapsed times. This is a fundamental `feature' of voluntary cooperation: each party must take responsibilty for the sense of what it receives from the other. This feature will not be to everyone's taste, and it is unconventional. However, voluntary cooperation provides a way of collaborating without trust in a framework that forces us to confront the security issues directly. As such, it is a successful experiment.
If you do not use the cfengine model for statically mounting NFS filesystems (or if there are filesystems which do not naturally fall into the bounds of that model) then you can still statically mount miscellaneous filesystems using a statement of the form:
miscmounts:
class::
infohost:source-directory destination mode
infohost:source-directory destination mode=mode
ifelapsed=mins expireafter=mins
|
For example
physics::
# old syntax
libraryserver:/$(site)/libraryserver/data1
/$(site)/libraryserver/data1 ro
# consistent syntax
libraryserver:/$(site)/libraryserver/data2
/$(site)/libraryserver/data2 mode=ro
host:/foo /foo mode=rw,bg,hard,intr
This statement would mount the directory
/$(site)/libraryserver/data physically attached to host
libraryserver onto a directory of the same name on all hosts in the
group physics. The modes ro and rw signify
read-only and read-write respectively.
If no mode is given, read-write is assumed.
The mountables declaration need only be used if you are using
cfengine's model for mounting NFS filesystems. This declaration informs
hosts of what filesystem resources are available for mounting. This
list is used in conjunction with binservers and
homeservers to determine which filesystems a given host should
mount, according to the cfengine model.
The syntax of the list is:
mountables:
class::
"filesystem to mount"
readonly=false/off/true/on
mountoptions=nfs-options
e.g.
mountables:
class::
server:/site/server/u1
server:/site/server/local
linuxhost:/site/linuxhost/local
linuxhost:/site/linuxhost/u1
Notice that binary and home-directory filesystems are mixed freely here.
Cfengine determines which of the entries are homedirectories using the
homepattern variable.
Every time you add a disk or a mountable partition to your network, you
should add the partition to the list of mountables.
NOTE: This list is read in order, top down. Cfengine looks for
the first filesystem matching a given binary server when expanding the
variable $(binserver), so sometimes the ordering of filesystems
matters.
This list can be accessed in editfiles, to allow straightforward
configuration of the automounter, using the command AutomountDirectResources.
Using the processes facility, you can test for the existence of processes, signal (kill) processes and optionally restart them again. Cfengine opens a pipe from the system ps command and searches through the output from this command using regular expressions to match the lines of output from ‘ps’. The regular expression does not have to be an exact match, only a substring of the process line. The form of a process command is
processes:
class::
"quoted regular expression"
restart "shell command"
useshell=true/false/dumb
owner=restart-uid
group=restart-gid
chroot=directory
chdir=directory
umask=mask
signal=signal name
matches=number
define=classlist
elsedefine=classlist
action=signal/do/warn/bymatch
include=literal
exclude=literal
filter=filter_name
syslog=true/on/false/off
inform=true/on/false/off
audit=true/on/false/off
ifelapsed=mins
expireafter=mins
SetOptionString "quoted option string"
|
SetOptionString command to redefine
the option string. Cfengine assumes only that the first identifiable number
on each line is the process identifier for the processes, so you must not
choose options for ps which change this basic requirement (this is not a
problem in practice). Cfengine reads the output of the ps-command normally only
once, and searches through it in memory. The process table is only
re-consulted if SetOptionString is called. The options have the
following meanings:
signal=signal name hup 1 hang-up
int 2 interrupt
quit 3 quit
ill 4 illegal instruction
trap 5 trace trap
iot 6 iot instruction
emt 7 emt instruction
fpe 8 floating point exception
kill 9 kill signal
bus 10 bus error
segv 11 segmentation fault
sys 12 bad argument to system call
pipe 13 write to non existent pipe
alrm 14 alarm clock
term 15 software termination signal
urg 16 urgent condition on I/O channel
stop 17 stop signal (not from tty)
tstp 18 stop from tty
cont 19 continue
chld 20 to parent on child exit/stop
gttin 21 to readers pgrp upon background tty read
gttou 22 like TTIN for output if (tp->t_local<OSTOP)
io 23 input/output possible signal
xcpu 24 exceeded CPU time limit
xfsz 25 exceeded file size limit
vtalrm 26 virtual time alarm
prof 27 profiling time alarm
winch 28 window changed
lost 29 resource lost (eg, record-lock lost)
usr1 30 user defined signal 1
usr2 31 user defined signal 2
Note that cfengine will not attempt to signal or restart processes 0 to 3
on any system since such an attempt could bring down the system. The only
exception is that the hangup (hup) signal may be sent to process 1
(init) which normally forces init to reread its terminal configuration
files.
restart "shell command"owner=,group=chrootchdiruseshell=true/false/dumbSome programs (like cron) do not handle I/O properly when they fork
their daemon parts, this causes a zombie process and normally
hangs cfengine. By choosing the value `dumb' for this, cfengine
ignores all output from a program and does not use a startup shell.
This prevents programs like cron from hanging cfengine.
matches=number matches=>6 # warn number of matches is greater than or equal to 6
matches=1 # warn if not exactly 1 matching process
matches=<2 # warn if there are less than or equal to 2 matching processes
include=literalexclude=literaldefine=classlistelsedefine=classlistaction=signal/do/warn/bymatchsignal option) to matching
processes. This is equivalent to setting the value of this
parameter to ‘signal’ or ‘do’. If you set this option
to ‘warn’, cfengine sends no signal, but prints a message
detailing the processes which match the regular expression.
If the option is set to bymatch, then signals are only sent
to the processes if the matches criteria fail.
Here is an example script which sends the hang-up signal to cron, forcing it to reread its crontab files:
processes:
"cron" signal=hup
Here is a second example which may be used to restart the nameservice on a Solaris system:
processes:
solaris::
"named" signal=kill restart "/usr/sbin/in.named"
A more complex match could be used to look for processes belonging to a particular user. Here is a script which kills ftp related processes belonging to a particular user who is known to spend the whole day FTP-ing files:
control:
actionsequence = ( processes )
#
# Set a kill signal here for convenience
#
sig = ( kill )
#
# Better not find that dumpster here!
#
matches = ( 1 )
processes:
#
# Look for Johnny Mnemonic trying to dump his head, user = jmnemon
#
".*jmnemon.*ftp.*" signal=$(sig) matches=<$(matches) action=$(do)
# No mercy!
The regular expression ‘.*’ matches any number of characters, so this command searches for a line containing both the username and something to do with ftp and sends these processes the kill signal.
You can arrange for signals to be sent, only if the number of matches
fails the test. The action=bymatch option is used for this.
For instance, to kill process `XXX' only if the number
of matches is greater than 20, one would write:
processes:
"XXX" matches=<20 action=bymatch signal=kill
See also filters See filters, for more complex searches.
The packages action allows you to check for the existance of packages on the system, as determined by the package database you select. Optionally, if a package install command was specified, the package can be installed if it is not there.
This operation is set up such that it tries not to make assumptions about the package manager in use. For example, it should be possible to use RPM on a Solaris box.
The syntax summary is:
packages:
class::
package-name
pkgmgr=none/rpm/dpkg/sun/aix/portage/freebsd
cmp=eq/lt/gt/ge/le/ne
version=version-string
define=class-list(,:.)
elsedefine=class-list(,:.)
action=none/install/remove/upgrade/fix
ifelapsed=mins
expireafter=mins
audit=true/on/false/off
inform=true/on/false/off
EXAMPLES:
packages:
# install newpackage 1.10 if newpackage 1.0 or greater isn't installed
newpackage-1.10 action=install
cmp=ge
version=1.0
# upgrade any installed versions of compromised to at least 1.2
compromised-1.2 action=upgrade
version=1.2
cmp=le
# Make sure that version 1.2 is installed
compromised-1.2 action=fix
version=1.2
cmp=le
# remove any version of useless
useless action=remove
version=0.1
cmp=ge
|
actioninstall
Install this package if the version comparison does not match.
upgrade
Upgrade this package if the version comparison does match.
fix
Install or Upgrade this package if the version comparison does match.
remove
Uninstall this package if the version comparison does match.
cmpversion attribute. Possible values include:
eq
The version installed must be equal to version
lt
The version installed must be less than version
gt
The version installed must be greater than version
le
The version installed must be less than or equal to version
ge
The version installed must be creater than or equal to version
ne
The version installed must not be equal to version
The default value for this attribute is eq.
Note that cmp is used differently for install versus upgrade, fix and remove.
The action is performed when false for install, but when true for upgrade, fix or remove.
versioncmp attribute is ignored. See the allowed values of
pkgmgr below for an explation of how each package manager
will interpret this.
pkgmgrDefaultPkgMgr variable, or if that is not set,
there is no default. In that case, no checking will be done unless
pkgmgr is set explicitly for each package. Note that the default
value '‘none’' listed is merely a pseudo-value, and cannot actually
be used, since it would make no sense anyway.
Each package manager will interpret the version and cmp
attributes in its own way. For example, when you use
pkgmgr=rpm, the comparison will be done with the same rules that
RPM use if it were not being run through cfengine. Freebsd actually
invokes the standard system utility to do the comparisons for it, etc.
Currently, the following package managers are supported:
rpmrpm check assumes that you
are using a version of RPM that understands the concept of an epoch,
which means that you will want to use RPM version 3.0.3 or greater.
Versions as early as 2.5.6 may work, but it is doubtful. If multiple
packages of the same name are installed (i.e. kernel), then the check
considers the package to be installed at the specified version if
at least one of them satisifies the criteria specified by cmp and
version.
The format of a RPM version string is: [epoch:]version[-release]. The
version[-release] can be seen by simply running: rpm -q <pkg>.
In order to see the epoch, you must use a query format, like this:
rpm -q --queryformat "%{EPOCH}:%{VERSION}-%{RELEASE}\n" <pkg>.
Most packages do not have an epoch, and will print ‘(none)’ in the
epoch space. In recent incarnations of RPM, the absense of an epoch
is interpreted as 0. This is also how cfengine will interpret it.
Be careful with this. If the installed version
of a package has an epoch greater than 0, and you do not specify the epoch,
unexpected results may happen. For example, if you have a package installed,
‘foo-1:2.0-1’, and you specify a version=3.0-1 and a
cmp=gt, the check will be true, because the installed version has
an epoch of 1, and you did not specify an epoch, which implies you wanted
an epoch of 0. The rule here is basically to always check the epoch of
the package you really want, and specify it. It may take a few extra
extra seconds to check, but it will save you lots of headaches later.
portage
packages:
any::
# if the version of tar is less than 1.16-r2,
# then the *latest* version of tar will be installed:
app-arch/tar cmp=ge version=1.16-r2 action=install
# This is equivalent, but uses the package atom to
# define the version comparison:
>=app-arch/tar-1.16-r2 action=install
dpkgsunfreebsd
# install new package from FreeBSD ports tree
control:
DefaultPkgMgr = ( freebsd )
FreeBSDInstallCommand = ( "/usr/sbin/pkg_add -r %s" )
packages:
bsdsar action=install
# install a specific version from a local repository
control:
DefaultPkgMgr = ( freebsd )
FreeBSDInstallCommand = ( "/usr/sbin/pkg_add http://server/path/%s" )
packages:
bsdsar-1.10_2 action=install
Note that specifying the version of the package that is part of the freebsd package filename is required if not using "-r" mode. It does not use this version for comparison, just for the package filename to install.
You can also backgrade if you know that 1.2 is bad for instance.
packages:
bsdsar-1.10_2 action=upgrade
version=1.10_2
cmp=gt
The only gotcha about FreeBSD installation is trying to specify the package source location. Due to the unfortunate fact that freebsd doesn't provide a command line option – only an environment variable – for specifying the source repository, you have a few options.
Get it from the main FreeBSD binary package home:
FreeBSDInstallCommand = ( "/usr/sbin/pkg_add -r %s" )
Get it from a mounted directory or http server
FreeBSDInstallCommand = ( "/usr/sbin/pkg_add /nfs/packages/%s" )
FreeBSDInstallCommand = ( "/usr/sbin/pkg_add http://server/path/%s" )
Or write a script that tells pkg_add where to find it, like so:
FreeBSDInstallCommand = ( "/var/cfengine/packages/pkginstall %s" )
such as
#!/bin/sh
PACKAGESITE=http://my.local.repository/packages/
export PACKAGESITE
/usr/sbin/pkg_add -r $*
defineelsedefineactionFor install, the action will be taken if the comparison returns false.
For upgrade and remove, the action will be taken if the comparison returns false.
The classes in define and elsedefine will always be defined,
as applicable, regardless of the action specified.
installEach variable is of the format:
FOOInstallCommand = ( "/usr/bin/foo --args %s --more-args" )
The —args are of course optional. For FreeBSD and Sun, the %s is replaced with the package name
that was checked, and found to not be installed. For all other package managers the %s can have
a space separated list of package names.
upgraderemoveFOORemoveCommand = ( "/usr/bin/foo --args %s --more-args" )
The —args are of course optional. The %s is replaced with a space-separated list of the package names that were checked, and found to be installed.
NOTE: classes are defined according to the result of the check, not
any action performed as a result of that check. In otherwords, if for
example you have a situation where a package is not installed,
and the action= is set to install, the classes in elsedefine will
be defined regardless of whether or not the install was successful.
Assuming the package installed, the next run of cfagent will pick up that
fact. This has to be done since the package installs are batched, so there
is no reliable way to know if a given package was installed successfully.
Examples:
packages:
redhat_8_0::
m4 version=0:1.4.1-11 cmp=eq pkgmgr=rpm elsedefine=needsm4
In this first example, we are looking for the m4 package at exactly version
0:1.4.1-11. The installed m4 package on a redhat_8_0 box has no epoch
which is the same as zero. Specifying it will keep you out of trouble. This
check will cause needsm4 to be defined if the exact version of
m4 specified is not installed.
control:
redhat:;
DefaultPkgMgr = ( rpm )
gentoo::
DefaultPkgMgr = ( portage )
packages:
redhat_8_0::
make version=0:4.5-2 cmp=ge define=hasmake elsedefine=needsmake
In the second example, we use the DefaultPkgMgr variable to set the default
for the pkgmgr attribute to rpm. The actual version of make
installed on recent redhat_8_0 machine is 1:3.79.1-14. Since the check is
for greater than or equal to this version, the hasmake class will be
defined.
control:
redhat:;
DefaultPkgMgr = ( rpm )
RPMInstallCommand = ( "/usr/sbin/up2date %s" )
packages:
redhat_8_0::
make define=hasmake elsedefine=needsmake action=install
This example is much like the second example, except that if the package is
not installed, cfengine will attempt to install it using the command in
RPMInstallCommand, replacing the %s with the package name, make.
If there were multiple packages specified in this way, the package installation
would occur at the end of the package checks, and one command would be run,
with %s replaced with a list of all package names. In this example we chose
not to use a version spec, but it is allowed, and as always, is optional.
NOTE here that if make was not installed when the check is made,
needsmake is defined, regardless of whether or not the
install succeeds. If the install is successful, the next cfagent
run will define hasmake.
As of version 2.1.0 rename is a synonym for disable, See disable.
This is a synonym for disks, See disks.
The file /etc/resolv.conf specifies the default nameserver for
each host, as well as the local domain name. This file can also contain
other information, but these are the only two things cfengine currently
cares about. In specifying nameservers you should use the dotted
numerical form of the IP addresses since your system may not understand
the text form if it is not correctly configured. You may list as many
nameservers as you wish, with the default server at the top of the list.
The resolver normally ignores entries if you add more than three. The
statement:
resolve:
mygroup::
129.240.22.35
129.240.22.222
129.240.2.3
declares a list of nameservers for hosts in the group or class
mygroup. When you add the resolve command to the
actionsequence, this declaration together with the domain
variable (set here to uio.no) results in a
/etc/resolv.conf file of the form:
domain uio.no
nameserver 129.240.22.35
nameserver 129.240.22.222
nameserver 129.240.2.3
Note that the resolve action does not delete anything from the
file /etc/resolv.conf unless the EmptyResolvConf variable is set
to 'true' . It adds nameservers which do not previously exist and
reorders the lines of servers which do exist.
As of version 1.3.11, you may use a quoted string to add non-nameserver lines to this file. For example:
resolve:
mygroup::
129.240.22.35
129.240.22.222
"# Comment line"
"order bind, files"
If the line begins with a non-numeric character, the word `nameserver' is not added to the line.
SCLI is an SNMP command line interpreter written by Jürgen Schönwaelder of the Jacobs University of Bremen. It is a command interpreter used to simplify the interaction with SNMP enabled devices. SNMP is a stateless, UDP based network protocol for communicating with supporting hardware. The SNMP model does not fit very comfortably with the cfengine “responsibility for self” paradigm, but at some level SCLI can be viewed as just another form of interpreted script. SCLI adds a level of user friendliness and stateful behaviour to SNMP through its shell-like interface. This turns out to be both a help and a hindrance to cfagent.
The intermingling of stateful and stateless processes in the dialogue between cfengine and scli makes their integration non-trivial. Several compromises have to be made to aid usability and these could lead to difficulties in the practical use of the tools later.
The scli section of a cfagent configuration is a single script. The lines are passed as a collective object to the scli interpreter, not line-by-line as in other cases.
The basic approach is to open a pipe for the reading and writing of dialogue with the interpreter. There are some limitations to Unix pipes however, in particular input and output are separated which makes per-transaction error control essentially impossible. A work-around for this has been used in the test phase.
The cfengine interface is a special case of the shellcommands
interface, passing commands to SCLI instead of to /bin/sh.
The command options are the same as those below for shellcommands.
shellcommands:
class::
"scli-string" shellcommand options
"scli-string"
|
This integration was funded by the IST-EMANICS Network of Excellence in Network and Service Management, of which Oslo University College and the Jacobs University of Bremen are members.
Cfengine focuses on fairly simple-minded tasks in order to be as general as possible. In many cases, you will therefore want to write a script to do something special on your system. You can still take advantage of the classes you have defined by executing these scripts or shell commands from this section.
The syntax is simply to quote the command you wish to be executed.
shellcommands:
class::
"command-string"
timeout=seconds
useshell=true/false
umask=octal number
owner=uid
group=gid
background=false/true
chdir=directory
chroot=directory
preview=true/false
inform=false/true
audit=true/on/false/off
noabspath=false/true
ifelapsed=mins
expireafter=mins
define=class-list
elsedefine=class-list
|
expireafter
in which a second agent is required to interrupt a command.
chroot option changes the process root directory of the
command, creating a `sandbox' which the process cannot escape from. Best
used together with a change of owner (using the owner parameter),
since a root process can break out of a chrooted environment.
preview option means that the shellcommand will also be executed during
the --dry-run (-n) options. This allows cfengine to be more aware
of the results of scripts which define classes. This option should be used
with care.
Scripts should conform to the protocol of not executing unnecessary commands
when the classes opt_dry_run is defined.
Variable substitution works within the strings. Here are some examples.
shellcommands:
sun4::
"/usr/lib/find/updatedb"
AllHomeServers.Sunday::
"/dir/noseyparker /$(site)/$(host)/u1 $(sysadm) nomail"
AllBinaryServers.sun4.Saturday::
"/usr/etc/catman -w -M /usr/local/man"
"/usr/etc/catman -w -M /usr/local/X11R5/man"
"/usr/etc/catman -w -M /usr/man"
"/usr/etc/catman -w -M /usr/local/gnu/man"
If you need to write more advanced scripts which make detailed use of the
classes defined by cfengine, use the $(allclasses) variable to send
a complete list of classes to your script. An enviornment variable,
CFALLCLASSES, is set and is in the format
CFALLCLASSES=class1:class2:class3...
This variable is kept up-to-date at any given time with only the classes which are defined. The command line option ‘-u’ or ‘--use-env’ can be used to define an environment variable which will be inherited by all scripts and contains the same information. This is not the standard approach, since some systems cannot cope with this rapid change of environment and generate a Bus Error. Commands can be iterated over variable lists, provided there is at least one space between each variable. For example:
control:
actionsequence =
(
shellcommands
)
var1 = ( a:b:c )
var2 = ( x:y:z )
shellcommands:
"/bin/echo $(var1) $(var2)"
This iterates over all values of the list variables. See Iteration over lists. If you are iterating over a list, the time limit (in seconds) which is specified in the timeout parameter applies to each separate iteration, not to the sum total of all the iterations.
Strategies (introduced in cfengine version 2.0) are a way of picking from a set of classes randomly. Each class is a possible course of action. A strategy group (of classes) is defined as follows:
strategies:
{ my_strategy_alias
class1: "2"
class2: "3"
class3: "$(value)"
class4: "6"
class5: "1"
}
tidy:
class1.Hr00::
/home pat=*.mp3 age=0
class2.Hr02::
/home pat=*.wav age=0
The idea here is to randomly pick from a selected set of classes.
Specifically, each strategy is a class which is defined with a certain probability. An integer weight is provided in quotes to represent the probability weight of the associated class. When cfengine is run, it randomly picks one of the classes from each strategy. Using strategies, you can choose different ways of configuring or protecting a system, at random, thus confounding environmental attempts to break into the system.
Note that each strategy has a formal name (such as ‘my_strategy_alias’ in the example), but this name is not used to attach a strategy to an action the same way that filters or ACLs are.
The tidy function is used to delete (remove permanently) unwanted files
from a system. It is useful for tidying up in /tmp or cleaning
out core files from users' home directories. The form of an
entry is:
tidy:
class::
/directory
pattern/include=wildcard
recurse=number/inf
age=days
size=number/empty
type=ctime/mtime/atime
dirlinks=keep/tidy/delete
rmdirs=[true/all]/[false/none]/sub
links=stop/keep/traverse/tidy
compress=true/on/false/off
define=classlist
elsedefine=classlist
syslog=true/on/false/off
inform=true/on/false/off
audit=true/on/false/off
ifelapsed=mins
expireafter=mins
filter=filter alias
ignore=pattern
exclude=pattern
xdev=true/on/false/off
|
Note that, each of the options below can be written in either upper or lower case and abbreviated by any unique abbreviation.
home
may be used instead of an explicit directory, in which case cfengine
iterates over all home directories. It is compulsory to specify a
directory.
pattern=wildcard or include=wildcardexclude=wildcardignore=wildcardrecurse=number/infinf then cfengine opens all subdirectories and files beginning
from the specified filename. See Recursion.
age=dayslinks=stop/traverse/tidy-l command line option) you may give this option the value
true, or traverse, or follow. To specify no
recursion you set the value false or stop.
Note that the value set here in the cfengine program always
overrides the value set by the -l command line option, so you
can protect certain actions from this command line option by specifying
a negative value here. If you specify no value here, the behaviour is
determined by what you specify on the command line.
The value links=tidy has the same effect as the ‘-L’ command
line option except that here it may be specified per item rather than
globally. Setting this value causes links which point to non-existent
files to be deleted. This feature will not work on commands with the
‘home’ wildcard feature. If you want to clean up old links you
should either user a files command or the command line option
which sets the tidy feature globally.
size=>number/emptysize=number/empty.
The value of this parameter decides the size of files to be deleted.
Files larger than this value will be deleted if they also are older than
the time specified in age. The default size is zero so that any
file which gets matched by another critereon is deleted. However, if you
want to single out only totally empty files, the empty may be used.
With this option only empty files, nevery files with anything in them,
will be deleted, if older than age. By default, the filesizes
are in kilobytes, but kilobytes and megabytes may also be specified by
appending b,k,m to the numbers. Only the first character after the
number is significant so you may write the numbers however it might be
convenient, e.g. 14k, 14kB, 14kilobytes, the same as
for disable.
type=ctime/mtime/atimeage. The default is to compare access times (atime) or
the last time the file was read. A comparison by modification
time (mtime) uses the last time the contents of the file was
changed. The ctime parameter is the last time the contents, owner
or permissions of the file were changed. Note that on directories,
mtime is always used for comparisons, since the very act of stat'ing
alters atime and makes this comparison meaningless.
dirlinks=keep/tidy/deletetravlinks option is switched on,
cfengine will not tidy or delete links which point to directories,
instead it follows them into the subdirectory. This is a supplement
to the rmdirs option. You need both to make links
to directories disappear. Note that, even if travlinks
is set to true, cfagent will not follow symbolic links that are
not owned by the agent user ID; this is to prevent link race attacks,
in which users with write access could divert the agent to another part
of the filesystem,
rmdirs=true/false/all/subdirlinks, so that even
links which point to empty directories will be removed.
If this is set to `sub' then the topmost directory will not
be removed, only sub-directories.
define=classlistxdev tidy:
AllHomeServers::
home pattern=core R=inf age=0
home pattern=*~ R=inf age=7
home pattern=#* R=inf age=30
any::
/tmp/ pat=* R=inf age=1
/ pat=core R=2 age=0
/etc pat=hosts.equiv r=0 age=0
In the first example, all hosts in the group AllHomeServers
iterate a search over all user home directories looking for `core' files
(older than zero days) and emacs backup files ‘*~’,
‘#*’ older than seven days.
The default values for these options are the empty string for the wildcard pattern, zero for the recursion and a specification of the age is compulsory.
When cfengine tidies users' home directories, it keeps a log of all the
files it deletes each time it is run. This means that, in case of
accidents, the user can see that the file has been deleted and restore
it from backup. The log file is called .cfengine.rm and it is
placed in the home directory of each user. The file is owned by root,
but is readable to the user concerned.
The unmount function unmounts non-required filesystems and removes the
appropriate entry from the filesystem table (/etc/fstab or
equivalent). The syntax is simply
unmount:
class::
mounthost:filesystem
deletedir=true/false
deletefstab=true/false
force=true/false
ifelapsed=mins
expireafter=mins
|
The options allow you to temporarily unmount a directory without actually
removing it from the filesystem table. The option force is not currently
implemented and will likely have to be system dependent.
For example:
unmount:
physics::
libraryserver:/$(site)/libraryserver/data
If the device is busy then the actual unmount will not take place until it becomes free, or the machine is rebooted. This feature should work on AIX systems, in spite of these machines inherent peculiarities in the form of the filesystem table.
Some users do not mount filesystems on a directory of the same name as the source directory. This can lead to confusion. Note, if you have problems removing a mounted filesystem, try using the mountpoint of the filesystem, rather than the name of the filesystem itself, in the unmount command.
The server daemon is controlled by a file called cfservd.conf. The syntax of this configuration file is deliberately modelled on cfengine's own configuration file, but despite the similarities, they are separate.
You can use groups and import in both files
to break up files into convenient modules and to import
common resources, such as lists of groups.
Note that the classes in the cfservd.conf file do not tell you the classes of host which have access to files and directories, but rather which classes of host pay attention to the access and deny commands when the file is parsed.
Authentication is not by class or group but by hostname, like the /etc/exports file on most Unix systems. The syntax for the file is as follows:
control:
classes::
domain = ( DNS-domain-name )
cfrunCommand = ( "script/filename" ) # Quoted
MaxConnections = ( maximum number of forked daemons )
# ChecksumDatabase = ( filename ) - deprecated
IfElapsed = ( time-in-minutes )
DenyBadClocks = ( false )
AllowConnectionsFrom = ( IP numbers )
DenyConnectionsFrom = ( IP numbers )
AllowMultipleConnectionsFrom = ( IP numbers )
TrustKeysFrom = ( IP numbers )
AllowUsers = ( mark systemuser )
LogAllConnections = ( false/true )
LogEncryptedTransfers = ( false/true )
SkipVerify = ( IP numbers )
DynamicAddresses = ( IP numbers )
BindToInterface = ( IP number/hostname )
HostnameKeys = ( true/false )
groups:
Group definitions
import:
Files to import
admit: | grant:
classes::
/file-or-directory
wildcards/hostnames
deny:
classes::
/file-or-directory
wildcards/hostnames root=hostlist encrypt=true/on
|
Iteration of variables is allowed, hence:
control:
Split = ( " " )
hostlist = ( "10.10.10.1 10.10.10.2 10.10.10.3" )
dirs = ( "bin etc lib" )
base = ( /usr )
#########################################################
admit:
$(base)/$(dirs) $(hostlist)
results in:
Path: /usr/bin (encrypt=0)
Admit: 10.10.10.1 10.10.10.2 10.10.10.3 root=
Path: /usr/etc (encrypt=0)
Admit: 10.10.10.1 10.10.10.2 10.10.10.3 root=
Path: /usr/lib (encrypt=0)
Admit: 10.10.10.1 10.10.10.2 10.10.10.3 root=
The file consists of a control section and access information.
In the access control lists below, host ranges can be specified in a number of ways i) as substrings, ii) as address ranges denoted by the "-" hyphen, or iii) as CIDR (Classless Inter Domain Routing) notation. For example
128.39.73
128.39.74.10/23
128.39.74-75.10-22
2001:700:700:3:290:27ff:fea2:4730-4790
2001:700:700:3:290:27ff:fea2:4730/64
In the CIDR notation, the slash followed by a number indicates the netmask, or the number of bits which are common to a group of hosts. Normally, this is connected to a specific subnet, but here it simply represents the number of bits from the left which are fixed for matching; all remaining bits are wildcards. The following forms are equivalent:
128.39.74.
128.39.74.10/24
128.39.74.1-254
This variable allows a list of numerical IP masks to be specified, which cfservd will allow connections from. If the list is not empty and a host whose IP address is not specified attempts to connect to the daemon, its connection will be closed immediately. This can be used to prevent hanging connection attacks from malicous hosts and other denial of service attacks which would bind thread resources.
control:
AllowConnectionsFrom = ( 128.39.89 192.2.0.10 )
This variable should contain a list of IP wildcards to hosts which are allowed simultaneous sessions on the server. Hosts which are not in this list are allowed to connect only once, i.e. they must terminate and reconnect in order to establish a new session. This is to prevent a possible attacker from opening multiple sockets and never closing them, resulting in a denial of service attack. Hosts IP's can be placed here if they could have overlapping copy sessions (e.g. long backup transfers which can run over time). This prevents the error message "Multiple connections denied/spam shield".
This list determines which users are to be allowed to connect to the daemon. Note that there is no way of identifying users except by their public keys. If a malicious asserts their identity, when no public key for the named user is known to the server, then they could spoof the identity of that user. All users who should be allowed to connect need to be here. This applies to use of cfrun.
AllowUsers = ( mark root )
In other words, this is a "security by obscurity" first defence against picking up bad keys, when the server is in trust mode, with respect to a host. The attacker must know a valid user name in order to even try their luck entering into a key dialogue.
This reduces the probability that spoofing can be successful. The only real defence against spoofing is to make sure that all required public keys are installed in advance, and to switch off trust.
This variable no longer exists in cfengine version 2.
This variable no longer exists in version 2 of cfengine.
If this is set to a specific IP address of an IP configured interface, cfservd will listen for connections only on that interface. On Multi-homed hosts this allows one to restrict the traffic to one interface. Note, Unix only allows one or all interfaces to be selected. An interface must be configured with an IP address in order to be bound.
(This variable is deprecated as of version 2.1.21. The location of the database will be fixed internally.)
This is the path and filename to a database which will cache MD5 checksum values server-side. This optimization is only available if you have the Berkeley database library ‘libdb’ on your system. If this variable is not defined, no database caching will be used and checksum values will be computed directly on request. The utility of this solution is a trade-off between the time it takes to compute the checksum versus the time for a disk-based lookup.
This string is the command which you would like to be executed
remotely by the cfrun command. Note that you must, in addition,
authorize access to this file in the admit section. The access
rule should (as usual) be to the actual file object path, not
including any symbolic links.
If this is set to off, cfservd will not deny access to clients whose
clocks are off by more than one hour. The default is to deny access to
systems whose clocks differ by more than one hour. This can prevent
messages of the form `Can't stat' file when remote copying.
Hosts which are included by the allow-list above can be explicitly denied access using this list.
control:
DenyConnectionsFrom = ( 128.39.89.76 ) # rogue host
If this variable is set to true/on, it causes cfservd to lookup and store trusted public keys according to their DNS fully qualified host name, instead of using the IP address. This can be useful in environments where hosts do not have fixed IP addresses, but do have fixed hostnames.
HostnameKeys = ( on )
This method of storing keys is not recommended for sites with fixed IP addresses, since it removes one security barrier from a potential attacker by potentially allowing DNS spoofing.
The IfElapsed anti-spamming filter is also built into
cfservd so that a remote user cannot even get as far as
causing cfengine to parse its input files (which could
be used for spamming in itself). The time is in minutes,
the default is one hour.
If set to true, every successful connection will be logged to syslog. This could be useful for identifying abuses of the service, if the server should come under attack, e.g. a denial of service attack. The IP address can then be excluded from the allowed connections list.
If set to true, every successful request for a file that is granted access only with an encrypted connection is logged in syslog.
This integer value sets a limit on the maximum number of child daemon threads which cfservd will `fork' in order to handle remote requests. The default value is ten.
Hosts which are included in this list are automatically trusted, if cfservd does not know their public key. This allows public keys to be exchanged. Cfservd will not automatically accept a public key from a host it does not know, since the key will be used to assert strong authentication later. Once a public key has been associated with an IP address, it will never be updated, unless the existing key is deleted by hand.
control:
TrustKeysFrom = ( 128.39.89.76 ) # trusted host
TrustKeysFrom = ( 128.39.89.76/24 ) # trusted subnet
Hosts which are included in this list are assumed to have IP addresses which can change with time, e.g. hosts which are given IP addresses by DHCP or a BOOTP like protocol.
control:
DynamicAddresses = ( 128.39.74.100-200 ) # DHCP range
If cfservd receives a connection from an IP address that is in this list, and trustkey is true, the existing key for that IP address can be replaced with a new key, and the old key is recorded in a "used keys" list, access is granted. If trust is switched off, the server looks in the "used key list" to see if the key has been seen before. If not access is refused. If it has been seen before – it uses this earlier trust to accept the connection and replace the IP-key binding. Note that used keys are kept in a database for easy lookup, whereas fixed keys are kept in files for easy administration. If host keys change or are reinstalled on the dynamically allocated hosts, then this database should probably be deleted to purge keys that become illegal.
DHCP addresses have no effect on hosts that use IPV6, since IPV6 addresses are generally issued based on an interface MAC address and do not therefore change.
root=This list specifies the names of hosts which are to have read access to files, regardless of the owner of the file. This effectively gives root users on connecting hosts privileges to non-root owned files on the server, but not vice-versa, similar to the NFS root mapping, except that there is no question of a client being able to modify files on the server. Caution: cfservd trusts the DNS service, so be aware that cache poisoning attacks are a possible way of bypassing access controls.
Cfservd requires you to grant access to files without following any symbolic links. You must grant access to the real file or directory in order to access the file object. This is a security feature in case parties with login access to the server could grant access to additional files by having the permission to create symbolic links in a transitory directory, e.g. /tmp. As of version 2.0.4: Once a verified host address has been identified with a functioning public/private key authentication, the IP address is added to the SkipVerify list, so that time is not wasted in verifying reverse lookups, when the identify can be verified more efficiently and securely by a key mechanism.
encrypt=trueIf this option is set, cfservd will only serve the named files
if the copy access type is secure, i.e. on an encrypted
link. This presupposes that cfengine has been compiled with
a working OpenSSL library.
If connecting hosts use a Network Address Translator in order to share an IP address, reverse lookup will fail to give a correct verification of host identity. You can switch off cfservd's verification of IP host identity for specific IP addresses or patterns using this command. E.g.
SkipVerify = ( 192.0.0.10 192.0.2. )
This does not affect key verification.
NOTE!! This is a security risk because it means that cfservd implicitly trusts the connecting hosts! You should be very careful in using Network Address Translators in a secure environment. It is not recommended for sites which require a high level of security.
cfrunThe general syntactic form of the cfrun command is
cfrun -option --longoption class1 class2 ...
|
Since cfrun addresses remote hosts, there is an ambiguity in
whether options are intended for the cfrun command itself, on the local
host, or whether they are to be passed on to the agent on the remote hosts.
To clarify this distinction, the arguments are organized as follows:
cfrun -local options -- remote options -- remote classes
|
Local options are processed by cfrun on the local host; remote options
are passed on as options to the remote cfagent (actually to the
command defined in cfrunCommand in the file cfservd.conf;
remote classes are processed by the remote cfservd service, and specifiy
classes which must be satisfied by the remote host in order to invoke the
remote command.
The ‘-q’ and ‘-I’ options are
always assumed when executing cfengine remotely, so that SplayTime is
effectively zero when polling hosts serially, and the output always
shows what is happening on the remote hosts.
On connecting to a remote host, cfengine attempts to obtain credentials
by exchanging keys. Unknown keys, in a key exchange, need to be explicitly
accepted on trust. Normally, the interactive cfrun program prompts
the user explicitly, (like in the secure shell, ssh, connections).
This can be annoying if there are many hosts to connect to.
The ‘-T’ option tells cfengine to trust all new keys. This option
should be used with caution, and only at times when one is sure that the
hosts one is connecting to are trustworthy.
Each host evaluates the classes sent by cfrun
and decides whether cfengine should be invoked.
Only hosts which belong to the classes defined on the cfrun
command line are executed. This allows you to single out groups of hosts
which should execute cfengine, based on the very classes which you have
defined for your configuration. If no classes are sent on the command
line, then all hosts are run.
cfrun uses a configuration file which is located under the
CFINPUTS directory in order to determine which hosts and in
which order it should try to connect. Because cfengine always uses a
reliable TCP protocol for connections, it verifies each connection
rather than simply broadcasting openly. Using this file you can even
simulate broadcasting to hosts outside your subnet.
This file should contain every host name you ever want to
configure remotely, because you can still select subsets of
the file by specifying classes which the remote host will understand.
If the remote host is not in one of the classes you specify when you
run cfrun, then it will simply ignore the request. Conversely,
if you do not place a host in this file, it will never be contacted
when you use the cfrun command. The format of the file
is as follows
#
# Comment ..
#
domain=my.domain
access=user1,user2
outputdir=directory
maxchild=number limit
hostnamekeys=true/false
bindtointerface=IP address
hostname1 options
hostname2:port options
...
include=cfrun.site1.external.hosts
include=cfrun.site1.internal.hosts
include=cfrun.site2.private.hosts
include=cfrun.site2.shared.hosts
|
outputdir is present, cfrun forks a separate
process for each host and passes the output to files in a named directory.
The maxchild line limits the number of forked processes.
It is important to add the domain-name to this file. The options you specifiy in this file, per host, are added to those you might specify on the command line when invoking cfengine remotely. For instance, you might know of a bug on one host and decide not to perform interface configuration on that one machine. You would write a line like this:
funny.domain -- -i # problem host
You could use cfrun inside one of your cfengine configuration
files in order to remotely execute cfengine on all of the other network
machines, by setting up a host list. The disadvantage however is that
cfengine has to poll the systems on the network, which means that
cfengine cannot be working in parallel on all hosts.
Some other examples:
e.g. cfrun -- -- linux Run on all linux machines
cfrun -- -p Ping and parse on all hosts
cfrun -v -- -p Ping all, local verbose
cfrun -v -- -k -- solaris Local verbose, all solaris, but no copy
Amongst the local options, one may specify a subset of the hosts which are to be contacted by cfrun, i.e. to avoid processing the entire list of hosts. For example, to contact only host1 and host2, given that they are already in the list of hosts.
cfrun -v host1 host2
cfrun -v host1 host2 -- -p
Firewalls and Network Address Translators (NAT) can be a problem for addressing. Suppose you have a firewall and with a private IP-range behind the firewall. You want to update the nodes from a central host. You can do a two stage configuration: first update the firewall and then update from the firewall to the nodes.
But suppose you already use SNAT (Source Network Address Translation) and DNAT (Destination ...) for the nodes. With DNAT you can say that socket 22000 on the firewall is routed to host-name:5308. DNAT gives us the possibilty to update the nodes from a central server in one step instead of two.
If the port command is given cfrun uses this to connect to the client instead of the default (5308) one. Here is an example (cfrun.hosts):
domain=example.org
access=mark,sigmund
hostnamekeys=true
node1.example.org
node2.example.org:22000 -DNis
node2.example.org:22001
This connects to: 1) node1 with standard port, 2) node2 with port 22000 and extra options -DNis and, 3) node2 with port 22000.
In wrapper mode (non-forking, non-daemon mode), cfagent is run by adding a line to the root crontab file of each system:
0,30 * * * * /usr/local/sbin/cfexecd -F
This is enough to ensure that cfengine will get run. Any output generated by this job, will be stored in /var/cfengine/outputs.
The program cfexecd operates as a wrapper for cfagent. It has the
following options:
-h (--help)
-d (--debug)
-v (--verbose)
-q (--no-splay)
-F (--no-fork)
-1 (--once)
-g (--foreground)
-p (--parse-only)
-L (--ld-library-path)
In addition, if you add the following to the file cfagent.conf, the system administrator will be emailed a summary of any output:
control:
smtpserver = ( mailhub.example.org ) # site MTA which can talk smtp
sysadm = ( mark@example.org ) # mail address of sysadm
EmailMaxLines = ( n ) # max lines of output to email
OutputPrefix = ( "!" ) # Line prefix
Fill in suitable values for these variables. EmailMaxLines may
be set to 0 to disable email output, a postive integer to set a limit,
or inf to email the whole output regardless of its size. If
undefined, EmailMaxLines defaults to 100.
An alternative, or additional way to run cfengine, is to run the cfexecd
program is daemon mode (without the ‘-F’) option. In this mode, the daemon
lives in the background and sleeps, activating only in accordance with
a scheduling policy. The default policy is to run once every hour (equivalent
to Min00_05). Here is how you would modify cfagent.conf in
order to make the daemon execute cfagent every half-hour:
control:
# When should cfexecd in daemon mode wake up the agent?
schedule = ( Min00_05 Min30_35 )
Note that the time specifications are the basic cfengine time classes.
Although one of these methods should suffice,
no harm will arise from running both cron and the cfexecd side-by-side.
Locking mechanisms are used by cfagent to ensure that no contention will occur.
Note, that if problems with library path for compiled-in libraries occur, an
explicit library path can be specified with the ‘-L’ option.
0,30 * * * * /usr/local/sbin/cfexecd -F -L /local/iu/lib:/local/lib:/local/gnu/lib
The output generated by a cfagent run is collected and stored with date stamps in the outputs subdirectory of the work directory (usually /var/cfengine/outputs). If cfengine has a valid smtp server configured it will attempt to E-mail new reports to the system administrator. Duplicate reports are suppressed however for a period of one day. Thus, if one has a repeating message, then it will only be sent by E-mail once per day – this feature is meant to prevent cfagent from spamming administators with multiple, indentical reports. As soon a report different from the previous one is received, the memory is reset.
Note: this repeated message suppression feature cannot work if you include time dependent data in messages, i.e. if you include the date or time in an alert, then clearly the message will be a different message each time. Output from cfengine should not contain the time or date, except in the E-mail header.
In some cases you will want to run cfengine on a system to configure it
from scratch. If the system is in a very bad way, it might not even be
able to parse the cfengine configuration file, perhaps because the
network was not properly configured or the DNS (Domain Name Service) was
out of action. To help prevent this situation, cfengine looks for a
script called cf.preconf which gets executed prior to parsing and
can be used to perform any emergency tests. This file needs only
contain enough to get the system to parse the configuration files.
cf.preconf may be any script in any language. It need not exist
at all! It is fed one argument by cfengine, namely the system hard-class
for the current system (e.g. ultrix). Here is an example:
#!/bin/sh
#
# cf.preconf is an emergency/bootstrap file to get things going
# in case cfengine is unable to parse its config file
#
backupdir=/iu/nexus/local/iu/etc
#
# If these files don't exist, you might not be able to parse cfagent.conf
#
if [ ! -s /etc/resolv.conf ]; then
echo Patching basics resolv.conf file
cat > /etc/resolv.conf << XX
domain iu.hioslo.no
nameserver 128.39.89.10
XX
fi
#
# SVR4
#
if [ "$1" = "solaris" ]; then
if [ ! -s "/etc/passwd" ]; then
echo Patching missing passwd file
/bin/cp $backupdir/passwd /etc/passwd
fi
if [ ! -s "/etc/shadow" ]; then
echo Patching missing passwd file
/bin/cp $backupdir/shadow /etc/shadow
fi
fi
#
# BSD 4.3
#
if [ "$1" = "linux" ]; then
if [ ! -s "/etc/passwd" ]
then
echo Patching missing passwd file
/bin/cp $backupdir/passwd.linux /etc/passwd
fi
fi
Note - in some circumstances, it might be appropriate to exit cfengine altogether after this script. If the script outputs a string containing the text "cfengine-preconf-abort", then cfagent will abort execution immediately after this.
If, for some reason you are not satisfied with the defaults which
cfengine uses, then you can change them by making an entry in the
resource file. The default values are defined in the source code file
classes.c in the distribution. The format of the resource file
is:
hardclass.variable: value
For example, you might want to forget about where your HPUX system
mounts its mail directory and mount it under /usr/spool/mail. In
this case you would add the line:
hpux.maildir: /usr/spool/mail
To redefine the filesystem table for GNU/linux, you would write:
linux.fstab: /etc/linuxfstab
The full list of re-definable resources is:
mountcomm # command used to mount filesystems
unmountcomm # command used to unmount filesystems
ethernet # name of the ethernet device
mountopts # options to above mount command
fstab # the name of the filesystemtable
maildir # the location of the mail directory
netstat # the full path to netstat and options
pscomm # the path to the system's ps command
psopts # the options used by ps (default aux/ef)
You should never need to redefine resources unless you decide to do something
non-standard. Interested readers are referred to the values in classes.c.
Cfengine is easily extensible so as to support a variety of architectures. You can even add your own. To do so you need, first of all, to define a new class for the operating system concerned. The file classes.c has been separated off from the remainder of the source code so that you can easily see which data structures need to be extended.
To make life as straightforward as possible, three unused classes have been defined. They are called (unremarkably) unused1, unused2 and unused3. If you add any further classes, it will be necessary to increase the constant clssattr defined in cf.defs.h by one for every new addition. You do not need to change clssattr if you simple replace one of the unused classes by a real class.
To see fully the impact of what you need to do, you should make a search for the strings unused? in all of the source files. Certain special cases need to be handled for each operating system. For example, the form of the filesystem table is quite radically different on some systems such as AIX. One thing you must do is to fill in the default values for the new operating system in the file classes.c.
If you fill in the details for a new operating system before it finds its way into a new release, you might consider sending the details to the bug list in the next paragraph.
Here is a sample from a large configuration file, just to give you some ideas. The file is broken up into manageable pieces for convenience.
#####################################################################
#
# CFENGINE CONFIGURATION FOR site = iu.hioslo.no
#
# This file is for root only.
#
######################################################################
###
#
# BEGIN cfagent.conf
#
###
import:
#
# Split things up to keep things tidy
#
any::
cf.groups
cf.main
cf.site
cf.motd
hpux:: cf.hpux
linux:: cf.linux
solaris:: cf.solaris
sun4:: cf.sun4
ultrix:: cf.ultrix
freebsd:: cf.freebsd
#
# Do you want to do this ?
#
AllHomeServers:: cf.users
###
#
# END cfengine.conf
#
###
##############################################################
#
# cf.groups - for iu.hioslo.no
#
# This file contains all group/class definitions
#
#################################################################
###
#
# BEGIN cf.groups
#
###
groups:
#
# Define some groups
#
iu = ( nexus ferengi regula borg dax lore axis worf daystrom voyager
aud1 aud2 aud3 aud4 bajor ds9 takpah takpeh nostromo galron
thistledown rama chaos pc-steinarj pc-hildeh way jart kosh )
diskless = ( regula ferengi lore )
standalone = ( nexus axis dax borg worf daystrom voyager
aud1 aud2 aud3 aud4 bajor ds9 takpah takpeh
nostromo galron thistledown rama pc-torejo
pc-steinarj pc-hildeh )
AllHomeServers = ( nexus )
AllBinaryServers = ( nexus borg )
XBootServer = ( nexus )
WWWServers = ( nexus )
FTPserver = ( nexus )
NameServers = ( nexus )
PasswdServer = ( nexus )
BackupHost = ( nexus )
MailHub = ( nexus )
MailClients = ( iu -nexus )
###
#
# END cf.groups
#
###
##############################################################
#
# cf.main - for iu.hioslo.no
#
# This file contains generic config stuff
#
#################################################################
###
#
# BEGIN cf.main
#
###
control:
access = ( root ) # Only root should run this
site = ( iu )
domain = ( iu.hioslo.no )
sysadm = ( drift@iu.hioslo.no )
repository = ( /var/spool/cfengine )
netmask = ( 255.255.255.0 )
timezone = ( MET )
nfstype = ( nfs )
sensiblesize = ( 1000 )
sensiblecount = ( 2 )
editfilesize = ( 20000 )
mountpattern = ( /$(site)/$(host) )
homepattern = ( u? )
#
# If we undefine this with cfengine -N longjob
# then we switch off all jobs labelled with this class
#
addclasses = ( longjob )
#
# Macros & constants are inherited downwards in imports
# but are not passed up to parent files. Good idea to
# define them all here
#
masterfiles = ( /iu/nexus/local/iu )
main_server = ( nexus )
cfbin = ( /iu/nexus/local/gnu/lib/cfengine/bin )
gnu = ( /local/gnu )
ftp = ( /local/iu/ftp )
nisslave = ( dax )
nisfiles = ( /iu/nexus/local/iu/etc )
#
# The action sequence for daily (full) runs and
# for hourly updates (called with -DHourly)
#
Hr00::
actionsequence =
(
copy
mountall
mountinfo
checktimezone
netconfig
resolve
unmount
shellcommands
addmounts
links.Prepare
files.Prepare
directories
links.Rest
mailcheck
mountall
required
tidy
disable
editfiles
files.Rest
processes
)
!Hr00::
actionsequence =
(
resolve
shellcommands
copy
editfiles
processes
links
)
force::
actionsequence =
(
files.Prepare.Rest
tidy
)
######################################################################
homeservers:
iu:: nexus
binservers:
iu.solaris:: nexus
iu.linux:: borg
mailserver:
any:: nexus:/var/mail
mountables:
any::
nexus:/iu/nexus/u1
nexus:/iu/nexus/u2
nexus:/iu/nexus/u3
nexus:/iu/nexus/u4
nexus:/iu/nexus/u5
nexus:/iu/nexus/u6
nexus:/iu/nexus/ua
nexus:/iu/nexus/ud
nexus:/iu/nexus/local
nexus:/opt/NeWSprint
nexus:/opt/AcroRead
borg:/iu/borg/local
dax:/iu/dax/local
miscmounts:
linux||freebsd:: nexus:/iu/nexus/local /iu/nexus/local ro
######################################################################
broadcast:
ones
defaultroute:
cadeler30-gw
######################################################################
resolve:
128.39.89.10 # nexus
158.36.85.10 # samson.hioslo.no
129.241.1.99
######################################################################
tidy:
#
# Some global tidy-ups
#
/tmp/ pat=* r=inf A=1
/var/tmp pat=* r=inf A=1
/ pat=core r=1 A=0
/etc pat=core r=1 A=0
######################################################################
ignore: # Don't check or tidy these directories
/local/lib/gnu/emacs/lock/
/local/tmp
ftp
projects
/local/bin/top
/local/lib/tex/fonts
/local/iu/etc
/local/etc
/local/iu/httpd/conf
/usr/tmp/locktelelogic
/usr/tmp/lockIDE
RootMailLog
#
# Emacs lock files etc
#
!*
/local/lib/xemacs
#
# X11 keeps X server data in /tmp/.X11
# better not delete this!
#
.X11
#
# Some users like to give a file or two 777 protection here
# so netsurfers can update a log or counter when running as
# `nobody'
#
www
#####################################################################
disable:
/etc/hosts.equiv
/etc/nologin
/usr/lib/sendmail.fc
###
#
# END cf.main
#
###
##############################################################
#
# cf.site - for iu.hioslo.no
#
# This file contains site specific data
#
#################################################################
###
#
# BEGIN cf.site
#
###
links:
Prepare::
/local -> /$(site)/$(binserver)/local
/usr/local -> /local
dax::
/iu/dax/local +> /iu/nexus/local
/projects -> /iu/dax/local/projects
/iu/nexus/u1/sowille/data -> /iu/dax/scratch/data
XBootServer::
#
# Set up a /local/tftpboot area where all X terminal
# stuff will be kept.
#
/tftpboot -> /local/tftpboot
/local/tftpboot/td/configs -> /local/tftpboot/td/examples/configs
/etc/bootptab -> /tftpboot/bootptab
/tftpboot/usr/lib/X11/td -> /tftpboot/td
NameServers::
/etc/named.boot -> /local/iu/named/named.boot
MailHub::
/etc/mail/sendmail.cf ->! /iu/nexus/local/mail/sendmail.cf
MailClients.solaris::
/etc/mail/sendmail.cf ->! /iu/nexus/local/mail/client.cf
nexus::
/local/bin +> /local/latex/bin
#############################################################
disable:
#
# We run Berkeley sendmail and the config files are
# all under /iu/nexus/local/lib/mail
#
/etc/aliases
WWWServers.Sunday::
#
# Disabling these log files weekly prevents them from
# growing so enormous that they fill the disk!
#
/local/iu/httpd/logs/access_log rotate=empty
/local/iu/httpd/logs/agent_log rotate=empty
/local/iu/httpd/logs/error_log rotate=empty
/local/iu/httpd/logs/referer_log rotate=empty
#
# CERT warning, security fix
#
any::
/usr/lib/expreserve
FTPserver.Sunday.Hr00::
/local/iu/xferlog rotate=3
#################################################################
files:
Prepare::
/etc/motd m=0644 r=0 o=root act=touch
/.cshrc m=0644 r=0 o=root act=touch
PasswdServer::
/local/iu/etc/passwd m=0644 o=root g=other action=fixplain
/local/iu/etc/shadow m=0644 o=root g=other action=fixplain
WWWServers.Rest::
/local/iu/www m=775 g=www act=fixall r=inf
/local/iu/httpd/conf m=664 o=root g=www act=fixall r=inf
/local/iu/www/cgi-bin-public/count_file m=777 o=root g=www act=fixplain
FTPserver::
#
# Make sure anonymous ftp areas have the correct
# protection, or logins won't be able to read
# files - or perhaps a security risk. This is
# Solaris 2 specific...
#
$(ftp)/pub mode=755 o=ftp g=ftp r=inf act=fixall
$(ftp)/Obin mode=111 o=root g=other act=fixall
$(ftp)/etc mode=111 o=root g=other act=fixdirs
$(ftp)/usr/bin/ls mode=111 o=root g=other act=fixall
$(ftp)/dev mode=555 o=root g=other act=fixall
$(ftp)/usr mode=555 o=root g=other act=fixdirs
Prepare::
/etc/shells mode=0644 action=touch
AllBinaryServers.Rest.longjob::
/local mode=-0002 r=inf owner=root,bin group=0,1,2,3,4,5,6,7,staff
links=tidy action=fixall
/local/iu/RootMailLog m=0666 action=touch
dax.Rest::
/iu/dax/scratch r=0 o=root mode=1777 action=fixall
/iu/dax/local/projects r=0 o=root mode=755 action=fixdirs
nexus::
/local/mail/sendmail.cf o=root m=444 act=fixplain
/iu/nexus/ua/robot/.rhosts o=robot m=600 act=touch
/local/iu/named/pz o=root m=644 act=fixall r=1
/local/latex/lib/tex/texmf/fonts owner=root
mode=1666
recurse=inf
action=fixall
#################################################################
tidy:
#
# Make sure the file repository doesn't fill up
#
/var/spool/cfengine pattern=* age=3
/var pattern=core age=0 r=inf
/var/spool/mqueue pattern=* age=14 type=mtime
BackupHost::
# Here we tidy old backup tar files from the backup area
# A special tmp area gets cleared every 4 days. The files
# are created by Audun's backup help script (see shellcommands)
/iu/nexus/backup1 pat=* age=7
#################################################################
shellcommands:
PasswdServer::
# Build and install the BSD compatible passwd file
# from the master passwd/shadow file on Solaris
"/local/iu/bin/BuildPasswdFiles"
"/local/iu/bin/BuildGroupFiles"
BackupHost.Sunday.Hr00|BackupHost.Wednesday.Hr00::
#
# Make a system backup of /iu/nexus/u? with Audun's script
#
"$(cfbin)/cfbackup -p -f /iu/nexus/backup1 -s /iu/nexus/ud"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup1 -s /iu/nexus/ua"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup1 -s /iu/nexus/u1"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup1 -s /iu/nexus/u2"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup2 -s /iu/nexus/u3"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup2 -s /iu/nexus/u4"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup2 -s /iu/nexus/u5"
"$(cfbin)/cfbackup -p -f /iu/nexus/backup2 -s /iu/nexus/u6"
nexus.Sunday.longjob.Hr00::
#
# See how much rubbish users have accumulated each Sunday
#
"$(cfbin)/noseyparker /iu/nexus/u1 $(sysadm) "
"$(cfbin)/noseyparker /iu/nexus/u2 $(sysadm) "
"$(cfbin)/noseyparker /iu/nexus/u3 $(sysadm) "
"$(cfbin)/noseyparker /iu/nexus/u4 $(sysadm) "
"$(cfbin)/noseyparker /iu/nexus/u5 $(sysadm) "
"$(cfbin)/noseyparker /iu/nexus/u6 $(sysadm) "
"$(cfbin)/noseyparker /iu/nexus/ua $(sysadm) nomail"
"$(cfbin)/noseyparker /iu/nexus/ud $(sysadm) nomail"
nexus.longjob.Hr00::
#
# Update the GNU find/locate database each night
#
"$(gnu)/lib/locate/updatedb"
"/local/iu/bin/newhomepage.sh"
###############################################################
editfiles:
#
# cfengine installs itself as a cron job - sneaky! :)
#
{ /var/spool/cron/crontabs/root
AppendIfNoSuchLine "0 * * * * $(cfbin)/cfwrap $(cfbin)/cfhourly"
}
FTPserver::
{ /etc/shells
AppendIfNoSuchLine "/bin/tcsh"
AppendIfNoSuchLine "/local/gnu/bin/bash"
}
XBootServer::
{ /etc/inetd.conf
AppendIfNoSuchLine
"bootp dgram udp wait root /local/bin/bootpd bootpd -i -d"
}
nexus::
{ /iu/nexus/ua/robot/.rhosts
AppendIfNoSuchLine "borg"
AppendIfNoSuchLine "borg.iu.hioslo.no"
AppendIfNoSuchLine "aud4"
AppendIfNoSuchLine "aud4.iu.hioslo.no"
}
dax::
{ /etc/system
AppendIfNoSuchLine "set pt_cnt=128"
}
######################################################################
required:
#
# Any host must have a /local, /usr/local fs. Check that
# it exists and looks sensible. (i.e. not empty)
#
/$(site)/$(binserver)/local
######################################################################
copy:
#
# NIS seems broken at IU, so here we use NFS to fudge
# a file distribution as a temporary solution. Actually
# this makes the system work faster without NIS!
#
$(nisfiles)/services dest=/etc/services o=root g=other mode=0644
$(nisfiles)/hosts.deny dest=/etc/hosts.deny o=root mode=0644
!debian::
$(nisfiles)/hosts dest=/etc/hosts o=root g=other mode=0644
PasswdServer::
/etc/passwd dest=$(nisfiles)/passwd o=root g=other mode=0644
/etc/shadow dest=$(nisfiles)/shadow o=root g=other mode=0644
nexus::
/local/iu/etc/dfstab dest=/etc/dfs/dfstab o=root mode=0744
solaris.!PasswdServer::
$(nisfiles)/passwd dest=/etc/passwd o=root g=other mode=0644
$(nisfiles)/shadow dest=/etc/shadow o=root g=other mode=0600
$(nisfiles)/group.solaris dest=/etc/group o=root g=other mode=0644
linux::
$(nisfiles)/passwd.linux dest=/etc/passwd o=root g=other mode=0644
$(nisfiles)/group.linux dest=/etc/group o=root g=other mode=0644
###############################################################
processes:
"eggdrop" signal=kill
"irc" signal=kill
"ping" signal=kill
"NetXRay" signal=kill
"netxray" signal=kill
"ypserv" signal=kill
"ypbind" signal=kill
"rarpd" signal=kill
"rpc.boot" signal=kill
"README" signal=kill # You don't sh README !
!XBootServer::
"bootp" signal=kill
#
# These processes are not killed every hour, but once a day
# when cfengine runs at night. Note that there are often
# hanging pine and elm processes. These programs crash and
# go berserk, using hundreds of hours of CPU time.
#
Hr00::
"cron" signal=hup # HUP these to update their config
"inetd" signal=hup
"/local/sdt/sdt/bin" signal=term # For those elektro dudes who forget
# to log out
"netscape" signal=kill
"pine" signal=kill
"elm" signal=kill
###
#
# END cf.site
#
###
##################################################################
#
# cf.motd
#
# This file is used to set the message of the day file on
# each host
#
##################################################################
#####
#
# BEGIN cf.motd
#
#####
control:
#
# This points to the file containing general text
#
masterfile = ( /iu/nexus/local/iu/etc/motd-master )
local_message = ( /etc/motd.local )
editfiles:
{ /etc/motd
BeginGroupIfFileIsNewer "$(masterfile)"
EmptyEntireFilePlease
InsertFile "$(masterfile)"
InsertFile "$(local_message)"
PrependIfNoSuchLine "This system is running $(class):$(arch)"
EndGroup
}
#####
#
# BEGIN cf.motd
#
#####
Whether or not you perform any special services for users, with or without their consent is entirely a matter of local policy. In a school or college situation, users are often uncooperative and some are even irresponsible. This file shows you what you could do in an environment with inexperienced users, but please don't feel as though you have to be this totalitarian.
#################################################################
#
# cf.users - for iu.hioslo.no
#
# This file contains user specific actions
#
#################################################################
###
#
# BEGIN cf.users
#
###
ignore:
robot
tidy:
longjob::
#
# Some users just don't understand what they are doing
# and this is safest, allbeit totalitarian
#
home pat=.rhosts age=0
#
# Tidy up users' home dirs
#
home pat=core r=inf age=0
home pat=a.out r=inf age=1
home p=*% r=inf age=2
home p=*~ r=inf age=2
home p=#* r=inf age=1
home p=*.dvi r=inf age=14 type=ctime
home p=*.log r=inf age=2
home p=Log.* r=inf age=3
home p=CKP r=inf age=1
home p=BAK r=inf age=1
home p=log r=inf age=0
home p=*.o r=inf age=0
home p=*.aux r=inf age=3
home p=*.zip r=inf age=7
home/.deleted p=* r=inf age=0
home/.wastebacket p=* r=inf age=14
home/www p=*~ r=inf age=1
#
# Clear the big cache files netscape creates
#
home/.netscape-cache p=cache????* r=inf age=0
home/.MCOM-cache p=cache????* r=inf age=0
home/.netscape/cache p=* r=inf age=0
#################################################################
files:
AllHomeServers.longjob.rest::
#
# Check users files are not writable to the world
# and there are no stale links (pointing nowhere)
#
home mode=o-w recurse=inf action=fixall # links=tidy
home/.xsession mode=755 action=fixall
home/.cshrc mode=755 action=fixall
#################################################################
copy:
Hr00.longjob::
#
# Make sure each user has an up to date standard
# setup. Cshrc just sources in a big standard file
# which is kept in ~user/../.setupfiles/cshrc
# to reduce disk wastage
#
$(masterfiles)/lib/Cshrc dest=home/.cshrc
$(masterfiles)/lib/tkgrc dest=home/.tkgrc
$(masterfiles)/lib/fvwm2rc dest=home/.fvwm2rc
###
#
# END cf.users
#
###
#################################################################
#
# cf.solaris - for iu.hioslo.no
#
# This file contains Solaris specific patches
#
#################################################################
###
#
# BEGIN cf.solaris
#
###
directories:
#
# httpd/netscape want this to exist for some bizarre reason
#
/usr/lib/X11/nls
################################################################
tidy:
/var/log pattern=syslog.* age=0
MailHub::
/var/mail pattern=lp age=0
#################################################################
files:
#
# If this doesn't exist fork will not work and the
# system will not even be able to run the /etc/rc
# scripts at boottime
#
/etc/system o=root g=root m=644 action=touch
/var/log/syslog o=root m=666 action=touch
#############################################################
copy:
#
# Some standard setup files, can't link because
# machine won't boot if their not on / partition.
#
/local/bin/tcsh dest=/bin/tcsh mode=755
/local/iu/etc/nsswitch.standalone dest=/etc/nsswitch.conf
#
# Our named server uses a newer BIND
# Put this here so that it will be preserved under
# Solaris reinstallation
#
NameServers::
/local/iu/sbin/in.named dest=/usr/sbin/in.named mode=555
/local/iu/sbin/in.named.reload dest=/usr/sbin/in.named.reload mode=555
/local/iu/sbin/in.named.restart dest=/usr/sbin/in.named.restart mode=555
/local/iu/sbin/in.ndc dest=/usr/sbin/in.ndc mode=555
/local/iu/sbin/named-xfer dest=/usr/sbin/named-xfer mode=555
/local/iu/lib/nslookup.help dest=/usr/lib/nslookup.help mode=444
any::
/local/iu/lib/libresolv.a dest=/usr/lib/libresolv.a mode=444
/local/iu/lib/libresolv.so.2 dest=/usr/lib/libresolv.so.2 mode=444
/local/bin/nslookup dest=/usr/sbin/nslookup mode=444
##############################################################
editfiles:
{ /etc/netmasks
AppendIfNoSuchLine "128.39 255.255.255.0"
}
{ /etc/defaultrouter
AppendIfNoSuchLine "128.39.89.1"
}
{ /usr/openwin/lib/app-defaults/XConsole
AppendIfNoSuchLine "XConsole.autoRaise: on"
}
#
# CERT security patch for vold vulnerability
#
{ /etc/rmmount.conf
HashCommentLinesContaining "action cdrom"
HashCommentLinesContaining "action floppy"
}
##############################################################
disable:
/etc/.login type=file
/etc/aliases
#
# These files are ENORMOUS, don't let them fill the disk
#
Wednesday::
/var/lp/logs/lpsched rotate=empty
/var/adm/wtmpx rotate=empty
/var/adm/wtmp rotate=empty
##############################################################
files:
/etc/passwd m=0644 o=root g=other action=fixplain
/etc/shadow m=0600 o=root g=other action=fixplain
/etc/defaultrouter m=0644 o=root g=other action=touch
/var/adm/wtmpx m=0664 o=adm g=adm action=touch
/var/adm/wtmp m=0644 o=root g=adm action=touch
/var/adm/utmp m=0644 o=root g=adm action=fixplain
/var/adm/utmpx m=0664 o=adm g=adm action=fixplain
/tmp m=1777 action=fixdirs
##############################################################
disable:
#
# CERT security patch
#
/usr/openwin/bin/kcms_calibrate
/usr/openwin/bin/kcms_configure
/usr/bin/admintool
################################################################
shellcommands:
AllBinaryServers.Saturday.longjob.Hr00::
#
# Make sure the man -k / apropos data are up to date
#
"/usr/bin/catman -M /local/man"
"/usr/bin/catman -M /local/X11R5/man"
"/usr/bin/catman -M /usr/man"
"/usr/bin/catman -M /local/gnu/man"
"/usr/bin/catman -M /usr/openwin/share/man"
"/usr/bin/catman -M /local/X11R5/man"
"/usr/bin/catman -M /usr/share/man"
################################################################
editfiles:
#
# A painless way to add an rc.local script to the rc files
# under Solaris without having to fight though inittab
#
{ /etc/rc3.d/S15nfs.server
AppendIfNoSuchLine "sh /local/iu/etc/rc.local"
}
#
# umask defined when inetd starts is inherited by all subprocesses
# including ftpd which saves with mode 666 (!) unless we do this
#
{ /etc/rc2.d/S72inetsvc
PrependIfNoSuchLine "umask 022"
}
###
#
# END cf.solaris
#
###
#################################################################
#
# cf.linux - for iu.hioslo.no
#
# This file contains debian linux specific patches
#
#################################################################
###
#
# BEGIN cf.linux
#
###
files:
/etc/printcap m=644 o=root action=fixplain
#
# Cert advisories
#
/bin/mount m=755 o=root action=fixall
/bin/umount m=755 o=root action=fixall
#######################################################################
disable:
#
# Cert advisories
#
/sbin/dip-3.3.7n
########################################################################
links:
/local/bin/tcsh -> /bin/tcsh
/local/lib/mail -> /$(site)/$(main_server)/local/lib/mail
########################################################################
editfiles:
#
# Samba default mode needs to be set...
#
{ /etc/smb.conf
ReplaceAll "700" With "644"
}
#
# Linux date is very stupid and needs a very careful
# TZ definition, otherwise it loses
#
{ /etc/csh.cshrc
AppendIfNoSuchLine "setenv TZ 'MET-1MET DST-2,M3.5.0/2,M10.5.0/3'"
}
#
# resolv+ ordering
#
{ /etc/host.conf
PrependIfNoSuchLine "order bind"
}
#
# Should have been configured already (!)
#
{ /etc/ld.so.conf
AppendIfNoSuchLine "/usr/X11R6/lib"
}
#
# Kill annoying messages
#
{ /etc/cron.daily/standard
HashCommentLinesContaining "security"
}
#########################################################################
shellcommands:
Hr00::
#
# Find/locate database
#
"/usr/bin/updatedb"
###
#
# END cf.linux
#
###
FreeBSD, OpenBSD and NetBSD are sufficiently similar to have a single file for all.
#################################################################
#
# cf.bsd - for iu.hioslo.no
#
# This file contains bsd specific patches
#
#################################################################
###
#
# BEGIN cf.bsd
#
###
links:
/usr/spool -> /var/spool
/local/bin/tcsh -> /bin/tcsh
/local/bin/perl -> /usr/bin/perl
/usr/lib/sendmail -> /usr/sbin/sendmail
#################################################################
files:
/usr/tmp mode=1777 owner=root action=fixall
#################################################################
editfiles:
#
# Comment out all lines to shut up this annoying cfengine-like
# script, which sends mail every day!!!
#
{ /etc/crontab
HashCommentLinesContaining "daily"
HashCommentLinesContaining "weekly"
HashCommentLinesContaining "monthly"
}
#################################################################
copy:
$(masterfiles)/etc/printcap.client dest=/etc/printcap mode=0644
#########################################################################
shellcommands:
Hr00::
"/usr/libexec/locate.updatedb"
"/usr/bin/makewhatis /usr/share/man:/usr/X11R6/man"
###
#
# END cf.bsd
#
###
#########################################################
#
# This is a cfservd config file
#
#########################################################
#
# Could import cf.groups here and use a structure like
# in cfengine.conf, cf.main, cf.groups
#
control:
public = ( /usr/local/publicfiles )
almost_public = ( /usr/local/almostpublicfiles )
cfrunCommand = ( /iu/nexus/ud/mark/comp/Tests/cfrun-command )
MaxConnections = ( 10 )
#########################################################
admit: # or grant:
$(public) *
$(almost_public) *.iu.hioslo.no *.gnu.ai.mit.edu
/etc/passwd *.iu.hioslo.no
#
# Who can exec cfengine remotely?
#
$(cfrunCommand) *.iu.hioslo.no
#########################################################
deny:
$(public)/special *.moneyworld.com
!: Cfengine classes$(arch): Special variables$(binserver): Special variables$(class): Special variables$(colon): Special variables$(cr): Special variables$(date): Special variables$(dblquote): Special variables$(dollar): Special variables$(domain): Special variables$(faculty): Special variables$(fqhost): Special variables$(host): Special variables$(ipaddress): Special variables$(lf): Special variables$(n): Special variables$(quote): Special variables$(site): Special variables$(spc): Special variables$(sysadm): Special variables$(tab): Special variables$(timezone): Special variables$(version): Special variables$(year): Special variables${EmailMaxLines}: Special variables+: groups-D option: addclasses-D option: Cfengine classes-l: tidy-L: Single links-l: Syntax-N option: addclasses-N option: Cfengine classes-x option: cf.preconf bootstrap file.cfengine.rm: tidy/etc/host.conf: cf.preconf bootstrap file/var/cfengine/output: Cfexecd referencea=: tidya=: SyntaxAbortClasses: controlAccessedBefore(): Examples setting classesaction: Syntaxaction=: packagesactionsequence: actionsequenceactionsequence: controlAddClasses: addclassesAddInstallable: addinstallableaddmounts: actionsequenceage: tidyalerts: alertsAllowUsers: AllowUsersAuditing: Auditingbackup=: copyBindToInterface: BindToInterface in cfservdBindToInterface: BindToInterface in cfagentbinserver: Link Childrenbinserver: Single linksbinservers: binserversbroadcast: broadcastbymatch: processescf.preconf: cf.preconf bootstrap fileCFALLCLASSES: Special variablesCFALLCLASSES: Cfagent Runtime Optionscfinputs_version: Special variablescfrc: cfrc resource fileChangedBefore(): Examples setting classesChecksumDatabase: ChecksumDatabase in cfagentChecksumPurge: ChecksumPurgeChecksumUpdates: ChecksumUpdateschecktimezone: actionsequencechildlinks: actionsequencecmp=: packagesCompressCommand: CompressCommandcontrol: controlcreate: createdirectories: actionsequencedisable: disabledisable: actionsequencedomain: domaindomain: controlDryRun: dryruneditbinaryfilesize: editbinaryfilesizeeditfiles: actionsequenceeditfilesize: editfilesizeeditfilesize: controlEditSplit: EditSplitEmailMaxLines: Cfexecd referenceempty: disableEmptyResolvConf: emptyresolvconfExclamation: exclamationexclude=: Syntaxexec: Setting variables with functionsFileExtensions: fileextensionfiles: filesfiles: actionsequencefilter: filtersforce=: disksforce=: copy examplefreespace=: disksg=: Syntaxgroup: Syntaxgroups: groupshome: Syntaxhomepattern: mountablesHomePattern: homepatternhomeservers: homeserversIgnoreInterfaceRegex: IgnoreInterfaceRegeximport: importinclude=: Syntaxinterface configuration: interfacesInterfaceName: interfacenameIsDir(): Examples setting classesIsLink(): Examples setting classesIsNewerThan(): Examples setting classesIsPlain(): Examples setting classesl=: SyntaxLastSeen: lastseenLastSeenExpireAfter: lastseenexpireafterLD_LIBRARY_PATH: controllink: Syntaxlinkchildren: Link Childrenlinkchildren: Files linkchildrenlinks: linkslinks: actionsequencem=: Syntaxmailcheck: mailservermailcheck: actionsequencemailserver: mailserverMaxCfengines: Special variablesmethods: methodsmiscmounts: miscmountsmode: Syntaxmodule: actionsequencemoduledirectory: moduledirectorymountables: mountablesmountables: homeserversmountall: actionsequencemountinfo: actionsequencemountpattern: mountpatternnetconfig: actionsequencenetmask: netmasknetmask: controlnfstype: nfstypenfstype: controlnoabspath: shellcommandsnone: methodso=: Syntaxones: broadcastOutputPrefix: Special variablesowner: Syntaxp=: tidypackages: actionsequencepattern: tidypkgmgr=: packagesprocesses: actionsequencepurge=: copyr=: tidyr=: SyntaxRandomizing strategy: strategiesrecurse: tidyrecurse: SyntaxRepChar: repcharrepchar: Special variablesrequired: actionsequenceresolve: resolveresolve: actionsequenceRestricting access: accessReturnsZero(): Examples setting classesrotate=: disablerxdirs: Syntaxscanarrivals=: disksscheduling: schedulescli command interpreter: scliSecureInput: secureinputSensibleCount: sensiblecountsensiblecount: controlSensibleSize: sensiblesizesensiblesize: controlshellcommands: actionsequenceShowActions: showactionssignal: processessinglelinks: actionsequencesite: sitesite: controlSkipVerify: root=smtpserver: Cfexecd referenceSNMP: scliSplit: EditSplitsplit: splitsplit: Iteration over listssplit: Special variablesSpoolDirectories: spooldirectoriesSuspiciousNames: suspiciousnamessysadm: Cfexecd referencesysadm: sysadmsysadm: controltidy: tidytidy: actionsequencetimezone: controltouch: touchtruncate: disabletype=: Hard linkstype=: disableunderscoreclasses: Special variablesunmount: unmountunmount: actionsequenceversion=: packagesWildcards: tidyzeroes: broadcastzeros: broadcast--dry-run option: shellcommands-L option: Single links.cfdisabled: disableAllowConnectionsFrom variable: AllowConnectionsFromAppendIfNoSuchLinesFromFile: AppendIfNoSuchLinesFromFileAutoCreate: AutoCreateAutoExecInterval variable: AutoExecIntervalBeginGroupIfDefined: BeginGroupIfDefinedBeginGroupIfFileExists: BeginGroupIfFileExistsBeginGroupIfFileIsNewer: BeginGroupIfFileIsNewerBeginGroupIfNotDefined: BeginGroupIfNotDefinedcfrunCommand variable: cfrunCommandChecksumDatabase variable: ChecksumDatabase in cfservdclasses: groupsclasses: classesDenyBadClocks variable: DenyBadClocksDenyConnectionsFrom variable: DenyConnectionsFromDynamicAddresses variable: DynamicAddressesgroups: groupsLastNode literal: directoriesMaxConnections variable: MaxConnectionscfrun: cfrunfiles: Syntaxtimeout= in shellcommands: shellcommandsTrustKeysFrom variable: TrustKeysFrom
Table of Contents
cfrun